Top » Catalog » Cart Contents

What's In My Cart?

Product(s)

Super safety and specialty bit set, 75-piece Super safety and specialty bit set, 75-piece

   or remove
€46.18
Super-fine sanding discs grain 000 Super-fine sanding discs grain 000

   or remove
€7.64
Sanding fleece for LWS Sanding fleece for LWS

   or remove
€6.09
Polishing machine PM 100 Polishing machine PM 100

   or remove
€209.50
MICROMOT Mains Adapter NG 2/S MICROMOT Mains Adapter NG 2/S

   or remove
€23.17
Super-fine sanding discs grain 400 Super-fine sanding discs grain 400

   or remove
€3.82
Three jaw chuck for the lathe DB 250 Three jaw chuck for the lathe DB 250

   or remove
€42.27
Dial gauge Dial gauge

   or remove
€17.90
Cylinder sander WAS/E Cylinder sander WAS/E

   or remove
€119.92
Coarse-toothed (10 TPI per 25mm) Coarse-toothed (10 TPI per 25mm)

   or remove
€5.28
Replacement cutting disc for MICRO cutter MIC Replacement cutting disc for MICRO cutter MIC

   or remove
€7.72
Microfibre cloth Microfibre cloth

   or remove
€4.06
Four Jaw Chuck Four Jaw Chuck

   or remove
€189.90
Gear Chuck Gear Chuck

   or remove
€39.00
Slot cutter 3.2mm Slot cutter 3.2mm

   or remove
€4.06
Coarse-toothed blades (No. 5: 36 teeth per 25mm) Coarse-toothed blades (No. 5: 36 teeth per 25mm)

   or remove
€4.45
Universal and oil siphoning pump AP 12 Universal and oil siphoning pump AP 12

   or remove
€49.50
Insulation Resistance Tester MG500 Insulation Resistance Tester MG500

   or remove
€295.00
Edge cutter with pin 6.4mm Edge cutter with pin 6.4mm

   or remove
€4.06
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€16.66
Diamond-coated cutting disc for MIC Diamond-coated cutting disc for MIC

   or remove
€12.19
Grinding and Polishing Machine SP/E Grinding and Polishing Machine SP/E

   or remove
€85.00
Drill chuck with sliding sleeve for the tailstock Drill chuck with sliding sleeve for the tailstock

   or remove
€11.78
Precision magnetic gauge stand Precision magnetic gauge stand

   or remove
€24.00
Backing disc for LWS Backing disc for LWS

   or remove
€4.06
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€16.66
Lambswool polishing disc Lambswool polishing disc

   or remove
€6.09
Coarse-toothed blades (No. 3: 34 teeth per 25mm) Coarse-toothed blades (No. 3: 34 teeth per 25mm)

   or remove
€3.65
Jig saw blades made of HSS Jig saw blades made of HSS

   or remove
€4.00
Inspector mirror Inspector mirror

   or remove
€11.61
Multipurpose Vices Primus 75 Multipurpose Vices Primus 75

   or remove
€46.74
Coarse-toothed (25 TPI per 25mm) Coarse-toothed (25 TPI per 25mm)

   or remove
€5.28
Combi cutter 6.5/2.5mm Combi cutter 6.5/2.5mm

   or remove
€4.06
Disc Sander TG 250/E Disc Sander TG 250/E

   or remove
€231.50
Independent four jaw chuck for the DB 250 Independent four jaw chuck for the DB 250

   or remove
€26.00
Precision caliper square Precision caliper square

   or remove
€39.00
Coarse-toothed blades (No. 9: 14 teeth per 25mm) Coarse-toothed blades (No. 9: 14 teeth per 25mm)

   or remove
€3.65
Screwdriver bit set. 49-piece. Screwdriver bit set. 49-piece.

   or remove
€46.00
Insulation Resistance Tester MG125 Insulation Resistance Tester MG125

   or remove
€295.00
Disc Sander TG 125/E Disc Sander TG 125/E

   or remove
€170.50
Steel tape measure Steel tape measure

   or remove
€3.50
Corundum grinding disc for LWS Corundum grinding disc for LWS

   or remove
€2.84
Tungsten Carbide Tipped (TCT) Tungsten Carbide Tipped (TCT)

   or remove
€21.13
Grinding mop cylinder grit 240 Grinding mop cylinder grit 240

   or remove
€16.66
MICROMOT Mains Adapter NG 5/E MICROMOT Mains Adapter NG 5/E

   or remove
€56.00
Rasp plate with metal burrs made from wolfram carbide for LWS Rasp plate with metal burrs made from wolfram carbide for LWS

   or remove
€32.90
Coarse-toothed blades (No. 1: 50 teeth per 25mm) Coarse-toothed blades (No. 1: 50 teeth per 25mm)

   or remove
€4.45


   or remove
€4.87
Precision caliper 500mm Precision caliper 500mm

   or remove
€249.50
Diamond-coated cutting and roughing disc Diamond-coated cutting and roughing disc

   or remove
€22.90
Warding files set, 6pcs Warding files set, 6pcs

   or remove
€14.30
Machine Vice MS 4 Machine Vice MS 4

   or remove
€14.22
Collet Set for accurate use on round components Collet Set for accurate use on round components

   or remove
€228.80
Blade holders for DS 460 Blade holders for DS 460

   or remove
€14.20
Rounding over cutter 6.4mm Rounding over cutter 6.4mm

   or remove
€4.06
Corundum bound cutting disc for LWS Corundum bound cutting disc for LWS

   or remove
€5.28
Sanding fleece for LWS Sanding fleece for LWS

   or remove
€6.09
Precision steel vice PM 40 Precision steel vice PM 40

   or remove
€41.86
Multipurpose Vices Primus100 Multipurpose Vices Primus100

   or remove
€63.41
Radius Cutting Attachment, complete with pointed tool Radius Cutting Attachment, complete with pointed tool

   or remove
€61.36
Corundum sanding discs for LWS Corundum sanding discs for LWS

   or remove
€3.65
Spiral blade. 125mm long with plain ends (without pins). Spiral blade. 125mm long with plain ends (without pins).

   or remove
€4.45
Grinding mop cylinder grit 80 Grinding mop cylinder grit 80

   or remove
€8.33
Cutting disc, with reinforcement Cutting disc, with reinforcement

   or remove
€2.44
Inpection mirror 1-978 Inpection mirror 1-978

   or remove
€11.88
Tungstein carbide rasp - and cutting disc Tungstein carbide rasp - and cutting disc

   or remove
€16.50
V-slot cutter 6.5mm V-slot cutter 6.5mm

   or remove
€4.06
Professional set for finish grinding and polishing Professional set for finish grinding and polishing

   or remove
€27.56
Five piece HSS chisel set Five piece HSS chisel set

   or remove
€33.73
Slot cutter 5.0mm Slot cutter 5.0mm

   or remove
€4.06
Lever Dial Indicator Lever Dial Indicator

   or remove
€111.90
Coarse-toothed blades (No. 5: 17 teeth per 25mm) Coarse-toothed blades (No. 5: 17 teeth per 25mm)

   or remove
€3.65
Angle cutter 45 ° Angle cutter 45 °

   or remove
€4.06
Polishing felt, medium hard Polishing felt, medium hard

   or remove
€5.69
Long neck angle milling/drilling unit LWB 220/E Long neck angle milling/drilling unit LWB 220/E

   or remove
€102.03
Tungsten tipped saw blade Tungsten tipped saw blade

   or remove
€14.22
Sanding pads for OZI 220/E grit 80 Sanding pads for OZI 220/E grit 80

   or remove
€7.31
Lathe System PD 400 Lathe System PD 400

   or remove
€1,799.00
MICROMOT 50/E MICROMOT 50/E

   or remove
€30.89
Dividing attachment TA 230 for PF 250 Dividing attachment TA 230 for PF 250

   or remove
€195.53
Multiform grindstone Multiform grindstone

   or remove
€10.56
Sanding pads for OZI 220/E grit 240 Sanding pads for OZI 220/E grit 240

   or remove
€7.31
Chuck for TBM 220 Chuck for TBM 220

   or remove
€10.95
14-piece parallel supports set 14-piece parallel supports set

   or remove
€91.86

Sub-Total: €5,522.90

Checkout

Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x Super safety and specialty bit set, 75-piece
2 x Super-fine sanding discs grain 000
1 x Sanding fleece for LWS
1 x Polishing machine PM 100
1 x MICROMOT Mains Adapter NG 2/S
1 x Super-fine sanding discs grain 400
1 x Three jaw chuck for the lathe DB 250
1 x Dial gauge
1 x Cylinder sander WAS/E
1 x Coarse-toothed (10 TPI per 25mm)
1 x Replacement cutting disc for MICRO cutter MIC
1 x Microfibre cloth
1 x Four Jaw Chuck
1 x Gear Chuck
1 x Slot cutter 3.2mm
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Universal and oil siphoning pump AP 12
1 x Insulation Resistance Tester MG500
1 x Edge cutter with pin 6.4mm
2 x Grinding mop cylinder grit 120
1 x Diamond-coated cutting disc for MIC
1 x Grinding and Polishing Machine SP/E
1 x Drill chuck with sliding sleeve for the tailstock
1 x Precision magnetic gauge stand
1 x Backing disc for LWS
2 x Grinding mop cylinder grit 120
1 x Lambswool polishing disc
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Jig saw blades made of HSS
1 x Inspector mirror
1 x Multipurpose Vices Primus 75
1 x Coarse-toothed (25 TPI per 25mm)
1 x Combi cutter 6.5/2.5mm
1 x Disc Sander TG 250/E
1 x Independent four jaw chuck for the DB 250
1 x Precision caliper square
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Screwdriver bit set. 49-piece.
1 x Insulation Resistance Tester MG125
1 x Disc Sander TG 125/E
1 x Steel tape measure
1 x Corundum grinding disc for LWS
1 x Tungsten Carbide Tipped (TCT)
2 x Grinding mop cylinder grit 240
1 x MICROMOT Mains Adapter NG 5/E
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x 
1 x Precision caliper 500mm
1 x Diamond-coated cutting and roughing disc
1 x Warding files set, 6pcs
1 x Machine Vice MS 4
1 x Collet Set for accurate use on round components
1 x Blade holders for DS 460
1 x Rounding over cutter 6.4mm
1 x Corundum bound cutting disc for LWS
1 x Sanding fleece for LWS
1 x Precision steel vice PM 40
1 x Multipurpose Vices Primus100
1 x Radius Cutting Attachment, complete with pointed tool
1 x Corundum sanding discs for LWS
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Grinding mop cylinder grit 80
1 x Cutting disc, with reinforcement
1 x Inpection mirror 1-978
1 x Tungstein carbide rasp - and cutting disc
1 x V-slot cutter 6.5mm
1 x Professional set for finish grinding and polishing
1 x Five piece HSS chisel set
1 x Slot cutter 5.0mm
1 x Lever Dial Indicator
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Angle cutter 45 °
1 x Polishing felt, medium hard
1 x Long neck angle milling/drilling unit LWB 220/E
1 x Tungsten tipped saw blade
1 x Sanding pads for OZI 220/E grit 80
1 x Lathe System PD 400
1 x MICROMOT 50/E
1 x Dividing attachment TA 230 for PF 250
1 x Multiform grindstone
1 x Sanding pads for OZI 220/E grit 240
1 x Chuck for TBM 220
1 x 14-piece parallel supports set
€5,522.90
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
What's New?
Tungstein carbide rasp - and cutting disc
Tungstein carbide rasp - and cutting disc
€16.50
Languages
Portugues English

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online