Top » Catalog » Cart Contents

What's In My Cart?

Product(s)

magnetic base 80kg magnetic base 80kg

   or remove
€86.40
Felt cloth polishing disc (100 x 15mm) Felt cloth polishing disc (100 x 15mm)

   or remove
€21.12
Drill chuck with sliding sleeve for the tailstock Drill chuck with sliding sleeve for the tailstock

   or remove
€11.78
Treated muslin polishing wheel, stiff (100 x 15mm) Treated muslin polishing wheel, stiff (100 x 15mm)

   or remove
€5.28
Gear Chuck Gear Chuck

   or remove
€39.00
Blade for Steel and brass Blade for Steel and brass

   or remove
€13.00
Jig saw blades made of HSS Jig saw blades made of HSS

   or remove
€4.00
Combi cutter 6.5/2.5mm Combi cutter 6.5/2.5mm

   or remove
€4.06
Collet Set for accurate use on round components Collet Set for accurate use on round components

   or remove
€228.80
Fixed Steady Fixed Steady

   or remove
€55.60
Half round cutter 13mm Half round cutter 13mm

   or remove
€4.06
Pensander PS 13 Pensander PS 13

   or remove
€23.99
Angle cutter 45 ° Angle cutter 45 °

   or remove
€4.06
Chuck for TBM 220 Chuck for TBM 220

   or remove
€21.90
Edge cutter with pin 6.4mm Edge cutter with pin 6.4mm

   or remove
€4.06
Spare cutting wire Spare cutting wire

   or remove
€7.31
Independent four jaw chuck for the DB 250 Independent four jaw chuck for the DB 250

   or remove
€26.00
Replacement glue sticks for HKP 220 Replacement glue sticks for HKP 220

   or remove
€1.63
Slot cutter 3.2mm Slot cutter 3.2mm

   or remove
€4.06
Band knife of hardened spring band steel (without teeth) Band knife of hardened spring band steel (without teeth)

   or remove
€20.70
Bandsaw blade of bimetal for MBS 240/E Bandsaw blade of bimetal for MBS 240/E

   or remove
€23.98


   or remove
€9.74
Replacement belts for BSL 220/E Replacement belts for BSL 220/E

   or remove
€6.50
Three jaw chuck for the lathe DB 250 Three jaw chuck for the lathe DB 250

   or remove
€42.27
HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI

   or remove
€21.90
MICROMOT drill stand MB 200 MICROMOT drill stand MB 200

   or remove
€71.54
Professional polishing sponge Professional polishing sponge

   or remove
€6.42
Coarse-toothed (10 TPI per 25mm) Coarse-toothed (10 TPI per 25mm)

   or remove
€5.28
Protective device for hand-operated MICROMOT Protective device for hand-operated MICROMOT

   or remove
€4.87
Saw blade made of high-alloy special steel Saw blade made of high-alloy special steel

   or remove
€8.13
sanding belts for BBS/s Grit 80 sanding belts for BBS/s Grit 80

   or remove
€6.09
Self-adhesive white corundum sanding discs for TG 125/E Self-adhesive white corundum sanding discs for TG 125/E

   or remove
€8.13
Coarse-toothed blades (No. 3: 34 teeth per 25mm) Coarse-toothed blades (No. 3: 34 teeth per 25mm)

   or remove
€3.65
Spiral blade. 125mm long with plain ends (without pins). Spiral blade. 125mm long with plain ends (without pins).

   or remove
€4.45
Grinding mop cylinder grit 80 Grinding mop cylinder grit 80

   or remove
€8.33
Universal polishing paste Universal polishing paste

   or remove
€9.34
Replacement belts for BSL 220/E Replacement belts for BSL 220/E

   or remove
€3.25
Polishing Set Polishing Set

   or remove
€21.13
Super-fine sanding discs grain 000 Super-fine sanding discs grain 000

   or remove
€3.82
Microfibre cloth Microfibre cloth

   or remove
€4.06
14-piece parallel supports set 14-piece parallel supports set

   or remove
€91.86
Tungsten Carbide Tipped (TCT) Tungsten Carbide Tipped (TCT)

   or remove
€21.13
Fine dust paper filter for CW-matic Fine dust paper filter for CW-matic

   or remove
€10.56
Coarse-toothed blades (No. 5: 17 teeth per 25mm) Coarse-toothed blades (No. 5: 17 teeth per 25mm)

   or remove
€7.30
Aluminium Die-Cast Aluminium Die-Cast

   or remove
€176.80
Self-adhesive white corundum sanding discs for TG 250/E Self-adhesive white corundum sanding discs for TG 250/E

   or remove
€10.16
Diamond blade Diamond blade

   or remove
€27.23
Self-adhesive white corundum sanding discs for TG 125/E Self-adhesive white corundum sanding discs for TG 125/E

   or remove
€8.13
Tungsten tipped saw blade Tungsten tipped saw blade

   or remove
€14.22
Replacement belts for BSL 220/E Replacement belts for BSL 220/E

   or remove
€3.25
Self-adhesive white corundum sanding discs for TG 250/E Self-adhesive white corundum sanding discs for TG 250/E

   or remove
€10.16
MICROMOT tool holder MICROMOT tool holder

   or remove
€6.09
sanding belts for BBS/s Grit 240 sanding belts for BBS/s Grit 240

   or remove
€6.09
sanding belts for BBS/s Grit 150 sanding belts for BBS/s Grit 150

   or remove
€6.09
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€8.33
Fluted filter for CW-matic Fluted filter for CW-matic

   or remove
€15.04
Flexishaft MICROMOT 110/BF Flexishaft MICROMOT 110/BF

   or remove
€26.82
Solid carbide saw blade Solid carbide saw blade

   or remove
€33.33
Super-fine sanding discs grain 400 Super-fine sanding discs grain 400

   or remove
€3.82
Self-adhesive white corundum sanding discs for TG 125/E Self-adhesive white corundum sanding discs for TG 125/E

   or remove
€8.13
Polishing felt, medium hard Polishing felt, medium hard

   or remove
€5.69
Coarse-toothed blades (No. 1: 50 teeth per 25mm) Coarse-toothed blades (No. 1: 50 teeth per 25mm)

   or remove
€4.45
Coarse-toothed blades (No. 5: 36 teeth per 25mm) Coarse-toothed blades (No. 5: 36 teeth per 25mm)

   or remove
€4.45
Special Fused Alumina (Hardness N). Special Fused Alumina (Hardness N).

   or remove
€3.25
Sanding fleece for LWS Sanding fleece for LWS

   or remove
€6.09
Diamond-coated cutting disc for MIC Diamond-coated cutting disc for MIC

   or remove
€12.19
MICROMOT Mains Adapter NG 2/S MICROMOT Mains Adapter NG 2/S

   or remove
€23.17
Precision steel vice PM 40 Precision steel vice PM 40

   or remove
€41.86
Corundum bound cutting disc for LWS Corundum bound cutting disc for LWS

   or remove
€5.28
Sanding pads for OZI 220/E grit 240 Sanding pads for OZI 220/E grit 240

   or remove
€7.31
HSS cutting blade for OZI HSS cutting blade for OZI

   or remove
€17.00
Replacement cutting wire for the THERMOCUT 12/E Replacement cutting wire for the THERMOCUT 12/E

   or remove
€14.22
Corundum fan sander for LWS Corundum fan sander for LWS

   or remove
€4.45
Diamond-coated cutting and roughing disc Diamond-coated cutting and roughing disc

   or remove
€22.90
Corundum sanding discs for LWS Corundum sanding discs for LWS

   or remove
€3.65
Backing disc for LWS Backing disc for LWS

   or remove
€4.06
Corundum sanding discs for LWS Corundum sanding discs for LWS

   or remove
€3.65
Corundum fan sander for LWS Corundum fan sander for LWS

   or remove
€4.45
Tungsten carbide cutters set Tungsten carbide cutters set

   or remove
€21.95
Sanding pads for OZI 220/E grit 150 Sanding pads for OZI 220/E grit 150

   or remove
€7.31
MICROMOT Mains Adapter NG 5/E MICROMOT Mains Adapter NG 5/E

   or remove
€56.00
Side cutters 160mm Side cutters 160mm

   or remove
€15.13
Micro Compound Table KT 70 Micro Compound Table KT 70

   or remove
€77.64
Tungstein carbide rasp - and cutting disc Tungstein carbide rasp - and cutting disc

   or remove
€16.50
Replacement cutting disc for MICRO cutter MIC Replacement cutting disc for MICRO cutter MIC

   or remove
€7.72

Sub-Total: €1,744.60

Checkout

Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
2 x magnetic base 80kg
2 x Felt cloth polishing disc (100 x 15mm)
1 x Drill chuck with sliding sleeve for the tailstock
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Gear Chuck
1 x Blade for Steel and brass
1 x Jig saw blades made of HSS
1 x Combi cutter 6.5/2.5mm
1 x Collet Set for accurate use on round components
1 x Fixed Steady
1 x Half round cutter 13mm
1 x Pensander PS 13
1 x Angle cutter 45 °
2 x Chuck for TBM 220
1 x Edge cutter with pin 6.4mm
1 x Spare cutting wire
1 x Independent four jaw chuck for the DB 250
1 x Replacement glue sticks for HKP 220
1 x Slot cutter 3.2mm
1 x Band knife of hardened spring band steel (without teeth)
1 x Bandsaw blade of bimetal for MBS 240/E
2 x 
2 x Replacement belts for BSL 220/E
1 x Three jaw chuck for the lathe DB 250
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x MICROMOT drill stand MB 200
1 x Professional polishing sponge
1 x Coarse-toothed (10 TPI per 25mm)
1 x Protective device for hand-operated MICROMOT
1 x Saw blade made of high-alloy special steel
1 x sanding belts for BBS/s Grit 80
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Spiral blade. 125mm long with plain ends (without pins).
1 x Grinding mop cylinder grit 80
1 x Universal polishing paste
1 x Replacement belts for BSL 220/E
1 x Polishing Set
1 x Super-fine sanding discs grain 000
1 x Microfibre cloth
1 x 14-piece parallel supports set
1 x Tungsten Carbide Tipped (TCT)
1 x Fine dust paper filter for CW-matic
2 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Aluminium Die-Cast
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Diamond blade
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Tungsten tipped saw blade
1 x Replacement belts for BSL 220/E
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x MICROMOT tool holder
1 x sanding belts for BBS/s Grit 240
1 x sanding belts for BBS/s Grit 150
1 x Grinding mop cylinder grit 120
1 x Fluted filter for CW-matic
1 x Flexishaft MICROMOT 110/BF
1 x Solid carbide saw blade
1 x Super-fine sanding discs grain 400
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Polishing felt, medium hard
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Special Fused Alumina (Hardness N).
1 x Sanding fleece for LWS
1 x Diamond-coated cutting disc for MIC
1 x MICROMOT Mains Adapter NG 2/S
1 x Precision steel vice PM 40
1 x Corundum bound cutting disc for LWS
1 x Sanding pads for OZI 220/E grit 240
1 x HSS cutting blade for OZI
1 x Replacement cutting wire for the THERMOCUT 12/E
1 x Corundum fan sander for LWS
1 x Diamond-coated cutting and roughing disc
1 x Corundum sanding discs for LWS
1 x Backing disc for LWS
1 x Corundum sanding discs for LWS
1 x Corundum fan sander for LWS
1 x Tungsten carbide cutters set
1 x Sanding pads for OZI 220/E grit 150
1 x MICROMOT Mains Adapter NG 5/E
1 x Side cutters 160mm
1 x Micro Compound Table KT 70
1 x Tungstein carbide rasp - and cutting disc
1 x Replacement cutting disc for MICRO cutter MIC
€1,744.60
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
What's New?
Diamond-coated cutting and roughing disc
Diamond-coated cutting and roughing disc
€22.90
Languages
Portugues English

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online