Top » Catalog » Cart Contents

What's In My Cart?

Product(s)

Router base OFV Router base OFV

   or remove
€48.60
MICROMOT extension cord. 300cm. MICROMOT extension cord. 300cm.

   or remove
€6.50
BeeProg2 BeeProg2

   or remove
€999.00
HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI

   or remove
€21.90
Coarse-toothed blades (No. 3: 34 teeth per 25mm) Coarse-toothed blades (No. 3: 34 teeth per 25mm)

   or remove
€3.65
Super safety and specialty bit set, 75-piece Super safety and specialty bit set, 75-piece

   or remove
€92.36
Spare cutting wire Spare cutting wire

   or remove
€7.31
Silicon-Carbide. Silicon-Carbide.

   or remove
€3.25
Protective device for hand-operated MICROMOT Protective device for hand-operated MICROMOT

   or remove
€4.87
Extra narrow bandsaw blade (3.5mm) for tight radii Extra narrow bandsaw blade (3.5mm) for tight radii

   or remove
€15.44
BeeHive204 BeeHive204

   or remove
€2,950.00
Belt sander BBS/S Belt sander BBS/S

   or remove
€270.00
Grinding mop cylinder grit 80 Grinding mop cylinder grit 80

   or remove
€16.66
Flexishaft MICROMOT 110/P Flexishaft MICROMOT 110/P

   or remove
€28.04
Grinding mop cylinder grit 240 Grinding mop cylinder grit 240

   or remove
€16.66
BeeHive208S BeeHive208S

   or remove
€6,950.00
Ball-shaped diamond coated 1.2mm Ball-shaped diamond coated 1.2mm

   or remove
€4.06
Three-jaw steel drill chuck Three-jaw steel drill chuck

   or remove
€5.28
lathe tools 10mm lathe tools 10mm

   or remove
€95.00
Dividing attachment TA 230 for PF 250 Dividing attachment TA 230 for PF 250

   or remove
€195.53
MICROMOT glue gun HKP 220 MICROMOT glue gun HKP 220

   or remove
€27.64
Blade for Steel and brass Blade for Steel and brass

   or remove
€26.00
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€8.33
Blade for Wood and Plastics Blade for Wood and Plastics

   or remove
€13.00
Footswitch FS Footswitch FS

   or remove
€31.70
Fine dust paper filter for CW-matic Fine dust paper filter for CW-matic

   or remove
€10.56
Special Fused Alumina (Hardness N). Special Fused Alumina (Hardness N).

   or remove
€3.25
Angle cutter 45 ° Angle cutter 45 °

   or remove
€4.06
Cylinder sander WAS/E Cylinder sander WAS/E

   or remove
€119.92
Super-fine sanding discs grain 000 Super-fine sanding discs grain 000

   or remove
€3.82
Collet chuck ER32 for D250X550 Collet chuck ER32 for D250X550

   or remove
€94.00
Replacement carving blades for MSG Replacement carving blades for MSG

   or remove
€95.10
Polishing Set Polishing Set

   or remove
€21.13
Coarse-toothed blades (No. 5: 17 teeth per 25mm) Coarse-toothed blades (No. 5: 17 teeth per 25mm)

   or remove
€7.30
MICRO-screwdrivers MICRO-screwdrivers

   or remove
€60.96
Ball shaped milling cutters Ball shaped milling cutters

   or remove
€6.50
Bandsaw blade of bimetal for MBS 240/E Bandsaw blade of bimetal for MBS 240/E

   or remove
€47.96
SmartProg2 SmartProg2

   or remove
€439.00
Tool holder type H for SWH 1-A Tool holder type H for SWH 1-A

   or remove
€73.00
Morse taper MT2 - B16 Morse taper MT2 - B16

   or remove
€7.50
Blade guides separately Blade guides separately

   or remove
€14.63
Universal and oil siphoning pump AP 12 Universal and oil siphoning pump AP 12

   or remove
€99.00
Angle polisher WP/E Angle polisher WP/E

   or remove
€109.00
3-jaw chuck centrically clamping 125mm 3-jaw chuck centrically clamping 125mm

   or remove
€126.50
Complete Engraving Kit with trial glass Complete Engraving Kit with trial glass

   or remove
€79.60
Coarse-toothed blades (No. 5: 36 teeth per 25mm) Coarse-toothed blades (No. 5: 36 teeth per 25mm)

   or remove
€4.45
Professional set for finish grinding and polishing Professional set for finish grinding and polishing

   or remove
€27.56
Bench drill press TBH Bench drill press TBH

   or remove
€322.35
MICROFLAME burner MFB/E MICROFLAME burner MFB/E

   or remove
€36.99
MICROFLAM gas soldering set MGS MICROFLAM gas soldering set MGS

   or remove
€39.90
Precision quick-action drill chuck 0-10mm B16 Precision quick-action drill chuck 0-10mm B16

   or remove
€43.00
Diamond-coated cutting and roughing disc Diamond-coated cutting and roughing disc

   or remove
€22.90
machine base with shelves for D250X550 machine base with shelves for D250X550

   or remove
€331.60
Collet Set for accurate use on round components Collet Set for accurate use on round components

   or remove
€228.80
Screwdriver bit set. 49-piece. Screwdriver bit set. 49-piece.

   or remove
€92.00
Universal holder UHZ Universal holder UHZ

   or remove
€23.17
Bench Circular Saw KS 230 Bench Circular Saw KS 230

   or remove
€115.50
Coarse-toothed blades (No. 9: 14 teeth per 25mm) Coarse-toothed blades (No. 9: 14 teeth per 25mm)

   or remove
€7.30
centrically clamping 125mm centrically clamping 125mm

   or remove
€169.00
14-piece parallel supports set 14-piece parallel supports set

   or remove
€183.72
MICROMOT tool holder MICROMOT tool holder

   or remove
€6.09
Compact workshop vacuum cleaner CW-matic Compact workshop vacuum cleaner CW-matic

   or remove
€345.50
MICROMOT drill stand MB 200 MICROMOT drill stand MB 200

   or remove
€71.54
Mill/Drill Unit BFB 2000. Mill/Drill Unit BFB 2000.

   or remove
€172.76
Lathe tools 10mm pastilhados Lathe tools 10mm pastilhados

   or remove
€95.00
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€16.66
Fixed Steady Fixed Steady

   or remove
€55.60
10-piece wood router cutter set 10-piece wood router cutter set

   or remove
€56.00
Multiform grindstone Multiform grindstone

   or remove
€21.12
Tool holder type D for SWH 1-A Tool holder type D for SWH 1-A

   or remove
€83.00
2-speed scroll saw DSH 2-speed scroll saw DSH

   or remove
€218.50
MICRO Heat gun MH 550 MICRO Heat gun MH 550

   or remove
€71.54


   or remove
€4.87
Backing disc for LWS Backing disc for LWS

   or remove
€8.12
Quick-action tool holder kit SWH AA Quick-action tool holder kit SWH AA

   or remove
€429.00
Band knife of hardened spring band steel (without teeth) Band knife of hardened spring band steel (without teeth)

   or remove
€20.70
Belt sander BS/E Belt sander BS/E

   or remove
€214.00
Coarse-toothed blades (No. 1: 50 teeth per 25mm) Coarse-toothed blades (No. 1: 50 teeth per 25mm)

   or remove
€8.90
Insulation Resistance Tester MG500 Insulation Resistance Tester MG500

   or remove
€295.00
Engraving tool GG Engraving tool GG

   or remove
€28.44
Ball-shaped diamond coated 2.2mm Ball-shaped diamond coated 2.2mm

   or remove
€4.06
Tool holder for rotary tools Tool holder for rotary tools

   or remove
€14.40
Follow rest for D250X550 Follow rest for D250X550

   or remove
€51.50
Four Jaw Chuck Four Jaw Chuck

   or remove
€189.90
Radius Cutting Attachment, complete with pointed tool Radius Cutting Attachment, complete with pointed tool

   or remove
€61.36
Micro Compound Table KT 70 Micro Compound Table KT 70

   or remove
€77.64
Ball-shaped diamond coated 3.2mm Ball-shaped diamond coated 3.2mm

   or remove
€4.06
Lambswool polishing disc Lambswool polishing disc

   or remove
€6.09
Tungsten Carbide Tipped (TCT) Tungsten Carbide Tipped (TCT)

   or remove
€21.13
Multipurpose Vices Primus 75 Multipurpose Vices Primus 75

   or remove
€46.74
Round nose pliers 45º EUROline-Conductive Round nose pliers 45º EUROline-Conductive

   or remove
€26.79
Rebating cutter 6.4mm Rebating cutter 6.4mm

   or remove
€4.06
Rasp plate with metal burrs made from wolfram carbide for LWS Rasp plate with metal burrs made from wolfram carbide for LWS

   or remove
€32.90
Replacement belts for BSL 220/E Replacement belts for BSL 220/E

   or remove
€3.25
Precision steel vice PM 40 Precision steel vice PM 40

   or remove
€41.86
Digital caliper gauge 300 mm Digital caliper gauge 300 mm

   or remove
€89.00
Snipe nose pliers 45º EUROline-Conductive Snipe nose pliers 45º EUROline-Conductive

   or remove
€31.25
Sanding pads for OZI 220/E grit 240 Sanding pads for OZI 220/E grit 240

   or remove
€14.62
sanding belts for BBS/s Grit 150 sanding belts for BBS/s Grit 150

   or remove
€6.09
Steel tape measure Steel tape measure

   or remove
€3.50
Fibre-Cut Discs Fibre-Cut Discs

   or remove
€4.06
CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C

   or remove
€15.30
Crimping plier for BNC Crimping plier for BNC

   or remove
€29.50
Sanding pads for OZI 220/E grit 150 Sanding pads for OZI 220/E grit 150

   or remove
€7.31
Disc Sander TG 125/E Disc Sander TG 125/E

   or remove
€170.50
MICROMOT Mains Adapter NG 5/E MICROMOT Mains Adapter NG 5/E

   or remove
€56.00
Corundum sanding discs for LWS Corundum sanding discs for LWS

   or remove
€3.65
MICROMOT Mains Adapter NG 2/S MICROMOT Mains Adapter NG 2/S

   or remove
€23.17
Three piece thread cutting set Three piece thread cutting set

   or remove
€39.00
Cutting tools of high quality cobalt HSS steel, ground Cutting tools of high quality cobalt HSS steel, ground

   or remove
€59.30
Corundum grinding disc for LWS Corundum grinding disc for LWS

   or remove
€2.84
Super-fine sanding discs grain 400 Super-fine sanding discs grain 400

   or remove
€3.82
Fibre-Cut Discs Fibre-Cut Discs

   or remove
€6.50
Combi cutter 6.5/2.5mm Combi cutter 6.5/2.5mm

   or remove
€4.06
Side cutters EUROline-Conductive Side cutters EUROline-Conductive

   or remove
€31.24
Half round cutter 13mm Half round cutter 13mm

   or remove
€4.06
Replacement belts for BSL 220/E Replacement belts for BSL 220/E

   or remove
€4.00
Sanding pads for OZI 220/E grit 80 Sanding pads for OZI 220/E grit 80

   or remove
€7.31

Sub-Total: €18,335.97

Checkout

Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
2 x Router base OFV
1 x MICROMOT extension cord. 300cm.
1 x BeeProg2
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
2 x Super safety and specialty bit set, 75-piece
1 x Spare cutting wire
1 x Silicon-Carbide.
1 x Protective device for hand-operated MICROMOT
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x BeeHive204
2 x Belt sander BBS/S
2 x Grinding mop cylinder grit 80
1 x Flexishaft MICROMOT 110/P
2 x Grinding mop cylinder grit 240
1 x BeeHive208S
1 x Ball-shaped diamond coated 1.2mm
1 x Three-jaw steel drill chuck
1 x lathe tools 10mm
1 x Dividing attachment TA 230 for PF 250
2 x MICROMOT glue gun HKP 220
2 x Blade for Steel and brass
1 x Grinding mop cylinder grit 120
1 x Blade for Wood and Plastics
2 x Footswitch FS
1 x Fine dust paper filter for CW-matic
1 x Special Fused Alumina (Hardness N).
1 x Angle cutter 45 °
1 x Cylinder sander WAS/E
1 x Super-fine sanding discs grain 000
1 x Collet chuck ER32 for D250X550
3 x Replacement carving blades for MSG
1 x Polishing Set
2 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x MICRO-screwdrivers
1 x Ball shaped milling cutters
2 x Bandsaw blade of bimetal for MBS 240/E
1 x SmartProg2
1 x Tool holder type H for SWH 1-A
1 x Morse taper MT2 - B16
1 x Blade guides separately
2 x Universal and oil siphoning pump AP 12
1 x Angle polisher WP/E
1 x 3-jaw chuck centrically clamping 125mm
2 x Complete Engraving Kit with trial glass
1 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x Professional set for finish grinding and polishing
1 x Bench drill press TBH
1 x MICROFLAME burner MFB/E
1 x MICROFLAM gas soldering set MGS
1 x Precision quick-action drill chuck 0-10mm B16
1 x Diamond-coated cutting and roughing disc
1 x machine base with shelves for D250X550
1 x Collet Set for accurate use on round components
2 x Screwdriver bit set. 49-piece.
1 x Universal holder UHZ
1 x Bench Circular Saw KS 230
2 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x centrically clamping 125mm
2 x 14-piece parallel supports set
1 x MICROMOT tool holder
2 x Compact workshop vacuum cleaner CW-matic
1 x MICROMOT drill stand MB 200
1 x Mill/Drill Unit BFB 2000.
1 x Lathe tools 10mm pastilhados
2 x Grinding mop cylinder grit 120
1 x Fixed Steady
2 x 10-piece wood router cutter set
2 x Multiform grindstone
1 x Tool holder type D for SWH 1-A
1 x 2-speed scroll saw DSH
2 x MICRO Heat gun MH 550
1 x 
2 x Backing disc for LWS
1 x Quick-action tool holder kit SWH AA
1 x Band knife of hardened spring band steel (without teeth)
2 x Belt sander BS/E
2 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Insulation Resistance Tester MG500
2 x Engraving tool GG
1 x Ball-shaped diamond coated 2.2mm
1 x Tool holder for rotary tools
1 x Follow rest for D250X550
1 x Four Jaw Chuck
1 x Radius Cutting Attachment, complete with pointed tool
1 x Micro Compound Table KT 70
1 x Ball-shaped diamond coated 3.2mm
1 x Lambswool polishing disc
1 x Tungsten Carbide Tipped (TCT)
1 x Multipurpose Vices Primus 75
1 x Round nose pliers 45º EUROline-Conductive
1 x Rebating cutter 6.4mm
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Replacement belts for BSL 220/E
1 x Precision steel vice PM 40
1 x Digital caliper gauge 300 mm
1 x Snipe nose pliers 45º EUROline-Conductive
2 x Sanding pads for OZI 220/E grit 240
1 x sanding belts for BBS/s Grit 150
1 x Steel tape measure
1 x Fibre-Cut Discs
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Crimping plier for BNC
1 x Sanding pads for OZI 220/E grit 150
1 x Disc Sander TG 125/E
1 x MICROMOT Mains Adapter NG 5/E
1 x Corundum sanding discs for LWS
1 x MICROMOT Mains Adapter NG 2/S
1 x Three piece thread cutting set
1 x Cutting tools of high quality cobalt HSS steel, ground
1 x Corundum grinding disc for LWS
1 x Super-fine sanding discs grain 400
1 x Fibre-Cut Discs
1 x Combi cutter 6.5/2.5mm
1 x Side cutters EUROline-Conductive
1 x Half round cutter 13mm
1 x Replacement belts for BSL 220/E
1 x Sanding pads for OZI 220/E grit 80
€18,335.97
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
What's New?
Cylinder sander WAS/E
Cylinder sander WAS/E
€119.92
Languages
Portugues English

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online