Top » Catalog » CRAMOLIN » Cart Contents

What's In My Cart?

Product(s)

Bandsaw blade of bimetal for MBS 240/E Bandsaw blade of bimetal for MBS 240/E

   or remove
€23.98
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€8.33
FLUX DISPENSING PEN, LEAD FREE FLUX DISPENSING PEN, LEAD FREE

   or remove
€32.84
Insulation Resistance Tester MG500 Insulation Resistance Tester MG500

   or remove
€590.00
Blade for Wood and Plastics Blade for Wood and Plastics

   or remove
€13.00
Grinding mop cylinder grit 120 Grinding mop cylinder grit 120

   or remove
€8.33
Collet Set for accurate use on round components Collet Set for accurate use on round components

   or remove
€228.80
Grinding mop cylinder grit 240 Grinding mop cylinder grit 240

   or remove
€16.66
Fixed Steady Fixed Steady

   or remove
€55.60
PLCC Puller PLCC Puller

   or remove
€4.51
IC tweezers IC tweezers

   or remove
€5.89
FREEZER-TOP 200ml FREEZER-TOP 200ml

   or remove
€7.30
Diamond blade Diamond blade

   or remove
€27.23
Replacement carving blades for MSG Replacement carving blades for MSG

   or remove
€31.70
Drill chuck with sliding sleeve for the tailstock Drill chuck with sliding sleeve for the tailstock

   or remove
€11.78
Machine Vice MS 4 Machine Vice MS 4

   or remove
€14.22
Tungsten carbide cutters set Tungsten carbide cutters set

   or remove
€21.95
Precision steel vice PM 40 Precision steel vice PM 40

   or remove
€41.86
EUROline-Conductive set of pliers EUROline-Conductive set of pliers

   or remove
€195.10
Saw blade made of high-alloy special steel Saw blade made of high-alloy special steel

   or remove
€8.13
Three jaw chuck for the lathe DB 250 Three jaw chuck for the lathe DB 250

   or remove
€42.27
Crosscut 'Super-Cut' blade Crosscut 'Super-Cut' blade

   or remove
€9.75
Special Fused Alumina (Hardness N). Special Fused Alumina (Hardness N).

   or remove
€3.25
Step clamps made of steel Step clamps made of steel

   or remove
€19.51
Jig saw blades made of HSS Jig saw blades made of HSS

   or remove
€4.00
Independent four jaw chuck for the DB 250 Independent four jaw chuck for the DB 250

   or remove
€52.00
Super-Cut Super-Cut

   or remove
€13.41
Diamond cutting blade for OZI Diamond cutting blade for OZI

   or remove
€50.00
Angle cutter 45 ° Angle cutter 45 °

   or remove
€4.06
Aluminium Die-Cast Aluminium Die-Cast

   or remove
€176.80
HSS immersion saw blades for OZI HSS immersion saw blades for OZI

   or remove
€8.53
Dividing attachment TA 230 for PF 250 Dividing attachment TA 230 for PF 250

   or remove
€391.06
Rounding over cutter 6.4mm Rounding over cutter 6.4mm

   or remove
€4.06
Coarse-toothed blades (No. 3: 41 teeth per 25mm) Coarse-toothed blades (No. 3: 41 teeth per 25mm)

   or remove
€4.45
HSS cutting blade for OZI HSS cutting blade for OZI

   or remove
€17.00
Diamond Coated Diamond Coated

   or remove
€45.93
Coarse-toothed blades (No. 3: 34 teeth per 25mm) Coarse-toothed blades (No. 3: 34 teeth per 25mm)

   or remove
€3.65
Corundum sanding discs for LWS Corundum sanding discs for LWS

   or remove
€3.65
Protective device for hand-operated MICROMOT Protective device for hand-operated MICROMOT

   or remove
€4.87
10-piece wood router cutter set 10-piece wood router cutter set

   or remove
€28.00
Tungstein carbide rasp - and cutting disc Tungstein carbide rasp - and cutting disc

   or remove
€16.50
Half round cutter 13mm Half round cutter 13mm

   or remove
€4.06
Self-adhesive silicone carbide sanding discs for TSG 250/E Self-adhesive silicone carbide sanding discs for TSG 250/E

   or remove
€10.16
Chuck for TBM 220 Chuck for TBM 220

   or remove
€10.95
Blade holders for DS 460 Blade holders for DS 460

   or remove
€14.20
Slot cutter 3.2mm Slot cutter 3.2mm

   or remove
€4.06
Self-adhesive white corundum sanding discs for TG 125/E Self-adhesive white corundum sanding discs for TG 125/E

   or remove
€8.13
Self-adhesive white corundum sanding discs for TG 250/E Self-adhesive white corundum sanding discs for TG 250/E

   or remove
€10.16
Diamond-coated cutting and roughing disc Diamond-coated cutting and roughing disc

   or remove
€22.90
Self-adhesive white corundum sanding discs for TG 250/E Self-adhesive white corundum sanding discs for TG 250/E

   or remove
€10.16
Universal and oil siphoning pump AP 12 Universal and oil siphoning pump AP 12

   or remove
€49.50
Microfibre polishing wheel, 15-ply (100mm) Microfibre polishing wheel, 15-ply (100mm)

   or remove
€11.38
Corundum fan sander for LWS Corundum fan sander for LWS

   or remove
€4.45
MICROMOT drill stand MB 200 MICROMOT drill stand MB 200

   or remove
€71.54
Compact workshop vacuum cleaner CW-matic Compact workshop vacuum cleaner CW-matic

   or remove
€172.75
Coarse-toothed blades (No. 5: 17 teeth per 25mm) Coarse-toothed blades (No. 5: 17 teeth per 25mm)

   or remove
€3.65
Coarse-toothed blades (No. 9: 14 teeth per 25mm) Coarse-toothed blades (No. 9: 14 teeth per 25mm)

   or remove
€3.65
Diamond-coated cutting disc for MIC Diamond-coated cutting disc for MIC

   or remove
€12.19
Three-jaw steel drill chuck Three-jaw steel drill chuck

   or remove
€5.28
Combi cutter 6.5/2.5mm Combi cutter 6.5/2.5mm

   or remove
€4.06
Replacement cutting disc for MICRO cutter MIC Replacement cutting disc for MICRO cutter MIC

   or remove
€7.72


   or remove
€4.87
Slot cutter 6.5mm Slot cutter 6.5mm

   or remove
€4.06
Micro Compound Table KT 70 Micro Compound Table KT 70

   or remove
€77.64
Cutting disc, with reinforcement Cutting disc, with reinforcement

   or remove
€2.44
Footswitch FS Footswitch FS

   or remove
€15.85
Fluted filter for CW-matic Fluted filter for CW-matic

   or remove
€15.04
FREEZER-BR 200ml FREEZER-BR 200ml

   or remove
€4.75
Core box bit 3.2mm Core box bit 3.2mm

   or remove
€4.06
Collet chuck ER32 for D250X550 Collet chuck ER32 for D250X550

   or remove
€94.00
ESD Tweezers 5-192 ESD Tweezers 5-192

   or remove
€11.40
Centre Turning Attachment Centre Turning Attachment

   or remove
€77.20
Sanding pads for OZI 220/E grit 80 Sanding pads for OZI 220/E grit 80

   or remove
€7.31
Self-adhesive silicone film for easy sanding disc replacement Self-adhesive silicone film for easy sanding disc replacement

   or remove
€7.72
Slot cutter 5.0mm Slot cutter 5.0mm

   or remove
€4.06
Self-adhesive white corundum sanding discs for TG 125/E Self-adhesive white corundum sanding discs for TG 125/E

   or remove
€8.13
Coarse-toothed blades (No. 1: 50 teeth per 25mm) Coarse-toothed blades (No. 1: 50 teeth per 25mm)

   or remove
€4.45
Corundum sanding discs for LWS Corundum sanding discs for LWS

   or remove
€3.65
Tungsten Carbide Tipped (TCT) Tungsten Carbide Tipped (TCT)

   or remove
€42.26
MICROMOT extension cord. 300cm. MICROMOT extension cord. 300cm.

   or remove
€6.50
Edge cutter with pin 6.4mm Edge cutter with pin 6.4mm

   or remove
€4.06
Sanding fleece for LWS Sanding fleece for LWS

   or remove
€6.09
Corundum fan sander for LWS Corundum fan sander for LWS

   or remove
€4.45
Mill/Drill Unit BFB 2000. Mill/Drill Unit BFB 2000.

   or remove
€172.76
Treated muslin polishing wheel, stiff (100 x 15mm) Treated muslin polishing wheel, stiff (100 x 15mm)

   or remove
€5.28
PROLUB 200ml PROLUB 200ml

   or remove
€3.27
POLISHER 200ml POLISHER 200ml

   or remove
€3.27
ANTISTATIC 200ml ANTISTATIC 200ml

   or remove
€3.27
SILICONE 200ml SILICONE 200ml

   or remove
€4.86

Sub-Total: €3,293.61

Checkout

Categories
Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files
Manufacturers
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Shopping Cart
1 x Bandsaw blade of bimetal for MBS 240/E
1 x Grinding mop cylinder grit 120
2 x FLUX DISPENSING PEN, LEAD FREE
2 x Insulation Resistance Tester MG500
1 x Blade for Wood and Plastics
1 x Grinding mop cylinder grit 120
1 x Collet Set for accurate use on round components
2 x Grinding mop cylinder grit 240
1 x Fixed Steady
1 x PLCC Puller
1 x IC tweezers
1 x FREEZER-TOP 200ml
1 x Diamond blade
1 x Replacement carving blades for MSG
1 x Drill chuck with sliding sleeve for the tailstock
1 x Machine Vice MS 4
1 x Tungsten carbide cutters set
1 x Precision steel vice PM 40
1 x EUROline-Conductive set of pliers
1 x Saw blade made of high-alloy special steel
1 x Three jaw chuck for the lathe DB 250
1 x Crosscut 'Super-Cut' blade
1 x Special Fused Alumina (Hardness N).
1 x Step clamps made of steel
1 x Jig saw blades made of HSS
2 x Independent four jaw chuck for the DB 250
1 x Super-Cut
1 x Diamond cutting blade for OZI
1 x Angle cutter 45 °
1 x Aluminium Die-Cast
1 x HSS immersion saw blades for OZI
2 x Dividing attachment TA 230 for PF 250
1 x Rounding over cutter 6.4mm
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x HSS cutting blade for OZI
1 x Diamond Coated
1 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Corundum sanding discs for LWS
1 x Protective device for hand-operated MICROMOT
1 x 10-piece wood router cutter set
1 x Tungstein carbide rasp - and cutting disc
1 x Half round cutter 13mm
1 x Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x Chuck for TBM 220
1 x Blade holders for DS 460
1 x Slot cutter 3.2mm
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Diamond-coated cutting and roughing disc
1 x Self-adhesive white corundum sanding discs for TG 250/E
1 x Universal and oil siphoning pump AP 12
1 x Microfibre polishing wheel, 15-ply (100mm)
1 x Corundum fan sander for LWS
1 x MICROMOT drill stand MB 200
1 x Compact workshop vacuum cleaner CW-matic
1 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x Diamond-coated cutting disc for MIC
1 x Three-jaw steel drill chuck
1 x Combi cutter 6.5/2.5mm
1 x Replacement cutting disc for MICRO cutter MIC
1 x 
1 x Slot cutter 6.5mm
1 x Micro Compound Table KT 70
1 x Cutting disc, with reinforcement
1 x Footswitch FS
1 x Fluted filter for CW-matic
1 x FREEZER-BR 200ml
1 x Core box bit 3.2mm
1 x Collet chuck ER32 for D250X550
1 x ESD Tweezers 5-192
1 x Centre Turning Attachment
1 x Sanding pads for OZI 220/E grit 80
1 x Self-adhesive silicone film for easy sanding disc replacement
1 x Slot cutter 5.0mm
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Corundum sanding discs for LWS
2 x Tungsten Carbide Tipped (TCT)
1 x MICROMOT extension cord. 300cm.
1 x Edge cutter with pin 6.4mm
1 x Sanding fleece for LWS
1 x Corundum fan sander for LWS
1 x Mill/Drill Unit BFB 2000.
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x PROLUB 200ml
1 x POLISHER 200ml
1 x ANTISTATIC 200ml
1 x SILICONE 200ml
€3,293.61
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
What's New?
Diamond-coated cutting and roughing disc
Diamond-coated cutting and roughing disc
€22.90
Languages
Portugues English

Copyright © 2024 Oficina-digital.com
De acordo com a Lei nº 144/2015 informamos que em caso de litígio, o foro competente será o Centro de Arbitragem de Conflitos de Consumo de Lisboa.
Livro de Reclamações Online