| 1 x | Safety Insulated Phillips Screwdriver 14-632VDE |
| 1 x | FLUX DISPENSING PEN, LEAD FREE |
| 1 x | Precision quick-action drill chuck 0-10mm B16 |
| 1 x | Collet chuck ER25 for D250X550 |
| 2 x | Face clamping disc for D250X550 |
| 3 x | PRECISION WIRE STRIPPER ESD-PLUS |
| 1 x | TIP SPT-10 |
| 1 x | Cutting tool 10 mm |
| 1 x | machine base with shelves for D250X550 |
| 2 x | quantum revolving center CM2 |
| 3 x | Combination pliers 190mm |
| 2 x | Tool holder type D for SWH 1-A |
| 1 x | 3-jaw chuck centrically clamping 125mm |
| 3 x | Steady rest for D250X550 |
| 1 x | Tool holder type H for SWH 1-A |
| 1 x | Quick-action tool holder kit SWH AA |
| 1 x | Broca de alta duração de 2.6mm |
| 1 x | Four Jaw Chuck |
| 1 x | DIL8/SSOP8 ZIF 120mil |
| 1 x | Centre Turning Attachment |
| 1 x | Fixed Steady |
| 1 x | BGA-Bottom-157 |
| 2 x | Top PSOP44 ZIF 600mil |
| 1 x | BGA-Bottom-221 |
| 1 x | DIL40/PLCC52 ZIF DS87C530 |
| 1 x | DIL44/SOIC44 ZIF-CS |
| 1 x | BGA-Bottom-204 |
| 3 x | VIDEOCLEAN 200ml |
| 1 x | Coarse-toothed (18 TPI per 25mm) |
| 2 x | Cutting disc, with reinforcement |
| 1 x | Brass brushes |
| 1 x | CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C |
| 1 x | Tungsten carbide cutter 2.0mm |
| 2 x | Safety Insulated Phillips Screwdriver 14-631VDE |
| 2 x | Cylinder sander WAS/E |
| 1 x | MICRO Miller FF 230 |
| 1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 1 x | Disc Sander TG 125/E |
| 1 x | Diamond Grinding Bits 5mm |
| 1 x | BGA-Bottom-9 |
| 1 x | BGA-Bottom-8 |
| 1 x | EUROline flat nose pliers |
| 2 x | BGA-0246/0243 |
| 1 x | BGA-Bottom-209 |
| 2 x | DIL28/PLCC28 ZIF |
| 1 x | BGA-Bottom-5 |
| 1 x | BGA-Bottom-218 |
| 1 x | Diamond Twist Drills |
| 1 x | Hot wire cutter THERMOCUT 650 |
| 1 x | High quality corundum grinding bits |
| 1 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 2 x | PROTECTION 200ml |
| 1 x | Precision Vice FMZ |
| 1 x | BGA-Bottom-202 |
| 1 x | V-slot cutter 6.5mm |
| 1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 2 x | SILICONE 200ml |
| 1 x | Tungsten carbide drills Ø1mm |
| 1 x | Coarse-toothed (10 TPI per 25mm) |
| 1 x | Diamond Grinding Bits 1mm |
| 1 x | Cotton polishers |
| 1 x | Beeprog2C |
| 1 x | Cone shaped milling cutter |
| 2 x | Corundum grinding disc for LWS |
| 1 x | BGA-Top-4 ZIF-CS |
| 2 x | Corundum fan sander for LWS |
| 1 x | Flap Wheels |
| 1 x | Chuck for TBM 220 |
| 2 x | Corundum grinding disc for LWS |
| 1 x | Cut off/mitre saw KGS 80 |
| 1 x | Blade guides separately |
| 2 x | Diamond Cutting Discs |
| 1 x | Tungstein carbide rasp - and cutting disc |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | BGA-Bottom-223 |
| 1 x | Cotton polishers |
| 2 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | BGA-Bottom-214 |
| 3 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | BGA-Bottom-195 |
| 1 x | Diamond Coated |
| 1 x | BGA-Bottom-224 |
| 1 x | Flap Wheels |
| 1 x | Felt polishers |
| 1 x | BGA-Bottom-22 |
| 1 x | Compact workshop vacuum cleaner CW-matic |
| 1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 1 x | Crosscut 'Super-Cut' blade |
| 1 x | Tungsten carbide drills Ø2mm |
| 1 x | Delta sander OZI/E |
| 1 x | BGA-Bottom-196 |
| 2 x | PROLUB 200ml |
| 1 x | BGA-Bottom-207 |
| 1 x | Cylindrical cutters |
| 2 x | Diamond Grinding Bits 1,8mm |
| 1 x | Coarse-toothed (25 TPI per 25mm) |
| 1 x | DIL28/TSOP28 ZIF 11.8 mm |
| 1 x | BGA-Bottom-216 |
| 1 x | BGA-Bottom-88 |
| 1 x | Fibre-Cut Discs |
| 1 x | Warding files set, 6pcs |
| 1 x | DIL40/TSOP40 ZIF-CS 12.4mm |
| 1 x | Corundum sanding discs for LWS |
| 1 x | SPRAYFLON 200ml |
| 1 x | ACCENT SERVICE TOOLS SET |
| 1 x | Diamond blade for MBS 240/E |
| 2 x | DIL16/SOIC16 ZIF 200 mil |
| 1 x | BGA-Bottom-201 |
| 1 x | BGA-Bottom-194 |
| 2 x | BGA-Bottom-102 |
| 1 x | Felt polishers |
| 1 x | BGA-Bottom-105 |
| 1 x | High quality corundum grinding bits |
| 1 x | Tungsten carbide cutter 3.0mm |
| 1 x | BGA-Bottom-222 |
| 3 x | Broca de alta duração de 1.3mm |
| 1 x | DIL48/PLCC68 ZIF MCS196-1 |
| 1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
| 1 x | Complete Engraving Kit with trial glass |
| 1 x | BGA-Bottom-21 |
| 1 x | Diamond cutting blade for OZI |
| 1 x | Combi cutter 6.5/2.5mm |
| 1 x | Cotton polishers |
| 1 x | BGA-Bottom-198 |
| 1 x | Disc Sander TG 250/E |
| 1 x | BGA-Bottom-2 |
| 2 x | Replacement glue sticks for HKP 220 |
| 1 x | Tungsten carbide cutter 1.0mm |
| 1 x | Corundum bound cutting disc for LWS |
| 1 x | Lathe chuck flange for D250X550 |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Three jaw chuck for the lathe DB 250 |
| 1 x | Step clamps made of steel |
| 1 x | Router base OFV |
| 1 x | Professional set for finish grinding and polishing |
| 1 x | Collet chuck ER32 for D250X550 |
| 1 x | Pensander PS 13 |
| 1 x | BGA-Bottom-145 |
| 2 x | BGA-Bottom-101 |
| 4 x | Universal and oil siphoning pump AP 12 |
| 1 x | BGA-Bottom-141 |
| 1 x | BGA-Bottom-13 |
| 1 x | BGA-Bottom-149 |
| 2 x | Screwdriver bit set. 49-piece. |
| 1 x | BGA-Bottom-140 |
| 1 x | Broca de ponto 6.30 x 2.50 |
| 1 x | Insert CCGT060202-AK |
| 2 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
| 1 x | BGA-Bottom-150 |
| 1 x | Parting tool 10mm |
| 2 x | BGA-0245/0243 |
| 3 x | Ceramic-tipped tweezers and ESD 5-095 |
| 4 x | ESD Tweezers 5-194 |
| 2 x | BGA-Bottom-125 |
| 1 x | BGA-Bottom-151 |
| 1 x | Cutter head for copy and surface milling MT2 |
| 1 x | Super safety and specialty bit set, 75-piece |
| 1 x | BGA-Bottom-147 |
| 1 x | BIT-SET |
| 3 x | Conj 5 pinças ESD |
| 1 x | BGA-Bottom-15 |
| 1 x | Dividing attachment TA 230 for PF 250 |
| 1 x | Thicknesser DH 40 |
| 1 x | Diamond-coated cutting and roughing disc |
| 1 x | Microfibre polishing wheel, 15-ply (100mm) |
| 1 x | BGA-0245/0241 |
| 1 x | BGA-Bottom-144 |
| 1 x | BGA-Bottom-131 |
| 2 x | Lathe System PD 400 |
| 2 x | Cutter head for copy and surface milling MT3 |
| 2 x | TU 1503V |
| 1 x | Engraving tool GG |
| 2 x | BGA-Bottom-106 |
| 1 x | ESD Tweezers 5-195 |
| 1 x | Three-jaw steel drill chuck |
| 1 x | Independent four jaw chuck for the DB 250 |
| 3 x | Broca de alta duração de 2.3mm |
| 1 x | Combination pliers 210mm |
| 2 x | Backing disc for LWS |
| 1 x | Hand magnifier with LED light 3X |
| 1 x | BGA-Bottom-127 |
| 2 x | BGA-Bottom-126 |
| 1 x | BGA-Bottom-148 |
| 1 x | Precision Drill/Grinder FBS 240/E |
| 1 x | DIL32/PLCC32 ZIF-CS NOR-1 |
| 1 x | Bench drill machine TBM 220 |
| 1 x | Bandsaw blade of bimetal for MBS 240/E |
| 1 x | DIL40/PLCC52 ZIF AWM-2 |
| 1 x | DIL40/TQFP44 ZIF EM652X |
| 1 x | DIL20W/PLCC20 ZIF |
| 1 x | DIL28/PLCC28 ZIF-CS |
| 1 x | DIL40/SDIP52 ZIF 55x |
| 1 x | DIL40/TQFP52 ZIF EM652X |
| 1 x | DIL40/PLCC28 ZIF AWM-1 |
| 1 x | DIL40/TQFP80-1 ZIF PIC-1A |
| 1 x | DIL40/TQFP64 ZIF CC-1 |
| 1 x | DIL40/PLCC52 ZIF MCS51-2 |
| 1 x | DIL40/TQFP44-1 ZIF MCS51 |
| 1 x | DIL40/PLCC68 ZIF AWM-1 |
| 2 x | Hand Magnifier 2-293 |
| 1 x | 10-piece wood router cutter set |
| 1 x | DIL40/VQFP64 ZIF AWM-1 |
| 1 x | DIL48/SDIP56 ZIF 68HC05Bx |
| 1 x | ANTISTATIC 200ml |
| 1 x | 14-piece parallel supports set |
| 1 x | DIL40/PLCC68 ZIF DS87C550 |
| 1 x | DIL44/TQFP44-3 ZIF |
| 3 x | Broca de alta duração de 0.9mm |
| 1 x | DIL48/TQFP144 ZIF ST10-1 |
| 1 x | DIL8/QFN8-1 ZIF-CS |
| 1 x | DIL40/TQFP80-1 ZIF AWM-1 |
| 1 x | DIL20/PLCC20 ZIF-CS |
| 3 x | Broca de alta duração de 1.4mm |
| 1 x | DIL44/TQFP44-2 ZIF |
| 1 x | DIL32/SDIP64-1 ZIF Toshiba-BM1136 |
| 1 x | DIL44/QFN44-2 ZIF-CS |
| 1 x | DIL42/SDIP42 ZIF 600mil |
| 1 x | DIL40/PLCC44 ZIF AWM-1 |
| 1 x | DIL40/PLCC44 ZIF W-EPROM / MCS51 |
| 1 x | DIL32/PLCC32 ZIF-CS |
| 1 x | DIL28/QFN28-2 ZIF-CS |
| 1 x | BGA-Bottom-118 |
| 1 x | Belt sander BBS/S |
| 1 x | DIL28/PLCC32 ZIF EPROM |
| 1 x | DIL40/TQFP64 ZIF EM652X |
| 1 x | Belt sander BS/E |
| 1 x | DIL18W/SOIC18 ZIF 300mil |
| 1 x | DIL28/TSOP28 ZIF 11,8mm Flash |
| 2 x | Broca de alta duração de 2.0mm |
| 1 x | DIL32/SOIC32 ZIF 445mil |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-5 |
| 1 x | DIL48/SSOP70 ZIF OKI-1 |
| 1 x | Broca de alta duração de 2.5mm |
| 1 x | Bottom PSOP44 NOR-1 |
| 1 x | Dial gauge |
| 1 x | DIL48/TSOP48 ZIF 15.4mm |
| 1 x | DIL48/PQFP80 ZIF M58BW-1 |
| 1 x | DIL48/TSOP48 ZIF 18.4mm |
| 2 x | Broca de alta duração de 0.5mm |
| 1 x | DIL3/SOT23-3 ZIF-CS |
| 1 x | Broca de alta duração de 2.4mm |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-2 |
| 1 x | DIL40/SOIC28 ZIF AWM-1 |
| 1 x | DIL16/SOIC16-1 ZIF 170mil |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-3 |
| 1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
| 1 x | DIL44/MLF44-1 ZIF-CS |
| 1 x | DIL48/SSOP56 ZIF Flash-2 |
| 1 x | broca de alta duração de 0,2mm |
| 1 x | DIL20/SOIC20 ZIF 300 mil |
| 1 x | Turning inserts SCMT09T304 |
| 1 x | DIL40/TSOP40 ZIF 18.4mm |
| 1 x | DIL48/SSOP56 ZIF Flash-1 |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-1 |
| 1 x | DIL48/PLCC52 ZIF-CS 68HC11 |
| 1 x | DIL32/TSOP32 ZIF 12.4mm Flash |
| 1 x | Bottom PSOP44 NOR-2 |
| 1 x | Broca de alta duração de 0.3mm |
| 1 x | Bottom PSOP44 NOR-3 |
| 1 x | DIL34/SSOP34 ZIF 200 mil |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-6 |
| 1 x | DIL28W/SOIC28 ZIF 300mil |
| 1 x | DIL14W/SOIC14 ZIF 150mil |
| 1 x | DIL40/SOIC16 ZIF MB-1 |
| 1 x | Broca de alta duração de 1.2mm |
| 1 x | DIL48/SSOP90 ZIF Flash-1 |
| 1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
| 1 x | DIL48/SSOP48 ZIF 300mil |
| 1 x | TORX-screwdrivers T9 |
| 1 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
| 1 x | DIL32/MLF32-1 ZIF |
| 1 x | Broca de alta duração de 0.8mm |
| 1 x | SCMT060204 |
| 1 x | DIL40/SOIC20 ZIF MB95-1 |
| 2 x | Broca de alta duração de 0.7mm |
| 1 x | DIL44/PSOP44 ZIF 600 mil |
| 1 x | Broca de alta duração de 2.2mm |
| 1 x | Broca de alta duração de 2.1mm |
| 1 x | Broca de alta duração de 1.1mm |
| 1 x | DIL40/MLF64 ZIF-CS AVR-1 |
| 1 x | EUROline end cutter |
| 1 x | EUROline mini side cutter |
| 1 x | DIL40/QFP64-3 ZIF NEC-1 |
| 1 x | DIL48/QFP100 ZIF PLD-4 |
| 1 x | DIL32/QFP64 ZIF H8-1 |
 |
| €37,785.40 |
