Top » Catalog » Soldering Iron and station

Soldering Iron and station

There are no products available in this category.

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

1 x	Grinding mop cylinder grit 240
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Universal and oil siphoning pump AP 12
1 x	Hot wire cutter THERMOCUT 650
1 x	Ball-shaped diamond coated 2.2mm
1 x	Blade guides separately
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Tungstein carbide rasp - and cutting disc
1 x	Micro Compound Table KT 70
1 x	sandpaper for PS 13 Grit 240
2 x	Belt sander BS/E
1 x	Diamond-coated cutting and roughing disc
1 x	Sanding pads for OZI 220/E grit 240
1 x	Crosscut 'Super-Cut' blade
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Cylinder sander WAS/E
1 x	Aluminium Die-Cast
2 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Jig saw blades made of HSS
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Screwdriver bit set. 49-piece.
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Self-adhesive white corundum sanding discs for TG 125/E
2 x	14-piece parallel supports set
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Protective device for hand-operated MICROMOT
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Lathe System PD 400
1 x	Polishing machine PM 100
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Sanding pads for OZI 220/E grit 80
1 x	Bench drill machine TBM 220
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Ball-shaped diamond coated 3.2mm
1 x	Insulation Resistance Tester MG500
1 x	Chuck for TBM 220
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Mill/Drill Unit BFB 2000.
1 x	MICROMOT Mains Adapter NG 2/S

€4,066.83

Quick Find

We Accept

Super-fine sanding discs grain 000

Super-fine sanding discs grain 000
€3.82

Languages