1 x | Steady rest for D250X550 |
3 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
1 x | Digital caliper gauge 300 mm |
2 x | Steel tape measure |
1 x | End side cutters 45º EUROline-Conductive |
1 x | Conj 5 pinças ESD |
1 x | Hot wire cutter THERMOCUT 12/E |
2 x | EUROline side cutter pointed head |
1 x | Cut off/mitre saw KGS 80 |
1 x | lathe tools 10mm |
1 x | Lever Dial Indicator |
1 x | Precision quick-action drill chuck 0-13mm B16 |
1 x | Tungsten carbide cutters set |
1 x | broca de alta duração de 0,6mm |
1 x | Side cutters 170mm |
2 x | Handy 1515 |
3 x | ESD-handling ser 9-361 |
1 x | VIDEOCLEAN 200ml |
1 x | MICROMOT 50/E |
1 x | ESD Tweezers 5-191 |
1 x | Side cutters 195mm |
1 x | Surface planer AH 80 |
1 x | CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C |
1 x | Professional set for finish grinding and polishing |
2 x | Machine Vice MS 4 |
3 x | EUROline mini side cutter |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | Precision Vice FMZ |
1 x | Centre Turning Attachment |
1 x | Broca de alta duração de 1.2mm |
1 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | Lambswool polishing disc |
1 x | Round nose pliers 185mm |
1 x | Precision steel vice PM 40 |
1 x | Beeprog2C |
2 x | ESD Tweezers 5-192 |
1 x | Safety insulated screwdrivers 14-603 VDE |
1 x | Brass contact cleaner brush |
1 x | Replacement belts for BSL 220/E |
1 x | Safety insulated screwdrivers 14-601 VDE |
1 x | Round nose pliers 160mm |
1 x | Collet chuck ER32 for D250X550 |
1 x | MICRO shaper MP 400 |
1 x | PVC-insulated tweezers 5-107-6 |
2 x | EUROline round nose pliers |
1 x | Broca de alta duração de 0.4mm |
1 x | Flat nose pliers 45º EUROline-Conductive |
1 x | ESD Brushe |
1 x | STRIPPING TOOL WITH ADJUSTABLE KNIVES |
1 x | Earth wire |
1 x | Replacement belts for BSL 220/E |
2 x | Super-fine sanding discs grain 400 |
1 x | Corundum grinding disc for LWS |
2 x | Side cutters EUROline-Conductive |
1 x | Lathe tools 10mm pastilhados |
1 x | Multipurpose Vices Primus 75 |
1 x | Quick-action tool holder kit SWH AA |
1 x | DEGRESER 200ml |
1 x | Super-fine sanding discs grain 000 |
1 x | Blade for Steel and brass |
3 x | Mini side cutters EUROline-Conductive |
2 x | Broca de ponto 3.15 x 1.25 |
2 x | Safety Insulated Phillips Screwdriver 14-634VDE |
1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
1 x | PRECISION WIRE STRIPPER ESD-PLUS |
1 x | Broca de alta duração de 1.4mm |
1 x | magnifier 3.25 x Ø 45mm with additional lens |
1 x | Table Saw TKS 2500 SC |
1 x | Three piece thread cutting set |
1 x | Precision Vice FMS 75 |
3 x | End side cutters EUROline-Conductive |
1 x | Replacement belts for BSL 220/E |
2 x | Corundum fan sander for LWS |
2 x | Safety Insulated Pozidriv Screwdriver 14-642VDE |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | Microfibre cloth |
1 x | Super-Cut |
2 x | broca de alta duração de 0,2mm |
1 x | Broca de alta duração de 2.4mm |
1 x | Corundum grinding disc for LWS |
1 x | 14-piece parallel supports set |
1 x | Cylinder sander WAS/E |
1 x | MICROMOT steel collet set |
1 x | FLUX-OFF 400ml |
1 x | Broca de alta duração de 0.7mm |
1 x | Ceramic-tipped tweezers and ESD 5-095 |
1 x | Ceramic-tipped tweezers and ESD 5-096 |
2 x | Magnetic base |
2 x | Round nose pliers 45º EUROline-Conductive |
1 x | Grinding mop cylinder grit 240 |
1 x | Dividing attachment TA 230 for PF 250 |
1 x | Corundum sanding discs for LWS |
1 x | EUROline top cutter |
1 x | Grinding mop cylinder grit 120 |
1 x | Precision quick-action drill chuck 0-8mm B16 |
1 x | TIP SPT-3 |
3 x | Safety Insulated Pozidriv Screwdriver 14-641VDE |
1 x | Professional Drill/Grinder IBS/E |
1 x | Bench Circular Saw KS 230 |
1 x | MICROMOT 50/EF |
2 x | EUROline end cutter |
1 x | TIP SPT-6 |
1 x | Sanding fleece for LWS |
1 x | Broca de alta duração de 0.9mm |
2 x | Hot wire cutter THERMOCUT 650 |
1 x | Chuck for TBM 220 |
1 x | Footswitch FS |
1 x | Radius Cutting Attachment, complete with pointed tool |
1 x | TIP SPT-2 |
2 x | Micro Compound Table KT 70 |
1 x | Super jig saw STS/E |
2 x | Safety insulated screwdrivers 14-608 VDE |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Diamond blade for MBS 240/E |
1 x | Precision caliper square |
1 x | 4-jaw chuck individually clamping 125mm |
1 x | Contact bracelet with spiral cord |
1 x | MICROMOT 230/E |
1 x | Broca de alta duração de 0.5mm |
1 x | 6-piece set of ESD/EGB tweezers |
2 x | EUROline mini side cutter |
1 x | Corundum bound cutting disc for LWS |
2 x | Mini side cutters EUROline-Conductive |
3 x | EUROline mini side cutter |
1 x | Safety Insulated Pozidriv Screwdriver 14-644VDE |
1 x | PLCC Extractor |
1 x | PLCC Puller |
1 x | machine base with shelves for D250X550 |
2 x | ESD Tweezers 5-194 |
1 x | HSS boring tool set, 6 pieces |
1 x | Polishing Set |
1 x | Lathe chuck flange for D250X550 |
1 x | Corundum sanding discs for LWS |
1 x | Floor cover ESD |
1 x | MICROMOT drill stand MB 200 |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Backing disc for LWS |
1 x | Side cutters 160mm |
1 x | TORQUE-SCREWDRIVER 1.5 - 4.0 Nm |
1 x | Table Sawr TKS 315 E |
1 x | Insulation Resistance Tester MG125 |
1 x | Side cutters 160mm |
1 x | MICROMOT 50 |
1 x | Diamond-coated cutting and roughing disc |
1 x | Bench drill press TBH |
1 x | Motor-driven carving device MSG |
1 x | 3-jaw chuck centrically clamping 125mm |
1 x | Broca de alta duração de 2.5mm |
1 x | Broca de alta duração de 2.1mm |
1 x | Collet chuck ER25 for D250X550 |
1 x | MICRO cutter MIC |
2 x | EUROline mini side cutter |
1 x | Broca de alta duração de 2.3mm |
1 x | TIP SPT-10 |
1 x | Broca de alta duração de 2.0mm |
1 x | Grinding mop cylinder grit 80 |
1 x | Face clamping disc for D250X550 |
1 x | Earthing module |
1 x | surface planing and thicknessing ADH 200 |
2 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
2 x | EUROline flat nose pliers |
1 x | |
1 x | Broca de ponto 5.00 x 2.00 |
1 x | MICRO woodturning lathe DB 250 |
2 x | Safety Insulated Phillips Screwdriver 14-633VDE |
2 x | ROTARY COAXIAL CABLE STRIPPER 3-STEPS |
1 x | TIP SPT-9 |
1 x | Pinça SOIC de 8 pinos |
1 x | Precision lathe PD 250/E |
1 x | Replacement glue sticks for HKP 220 |
1 x | CRIMPING PLIERS/WIRE STRIPPER |
1 x | Glass fibre contact cleaner brush |
1 x | Blade guides separately |
1 x | Conjunto de três brocas de ponto |
1 x | Table Saw FET |
1 x | Precision quick-action drill chuck 0-10mm B16 |
2 x | Professional polishing sponge |
1 x | Broca de alta duração de 1.3mm |
1 x | Tool holder for rotary tools |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | ESD Tweezers 5-193 |
1 x | Tool holder type D for SWH 1-A |
1 x | Collet Set for accurate use on round components |
1 x | Hot wire cutter THERMOCUT 230/E |
1 x | Bandsaw blade of bimetal for MBS 240/E |
1 x | 2-speed scroll saw DSH |
1 x | ESD-handling set |
1 x | MICRO Band Saw MBS 240/E |
1 x | Dial gauge |
1 x | Morse taper MT2 - B16 |
1 x | Mini side cutters EUROline-Conductive |
1 x | Flexishaft MICROMOT 110/P |
1 x | Universal polishing paste |
1 x | Four Jaw Chuck |
1 x | MICRO Miller FF 230 |
1 x | ESD Brushe |
2 x | Safety Insulated Phillips Screwdriver 14-632VDE |
1 x | TUNER 200ml |
1 x | Side cutters 180mm |
1 x | Tungstein carbide rasp - and cutting disc |
1 x | Three-jaw steel drill chuck |
1 x | Fixed Steady |
1 x | Step clamps made of steel |
1 x | Band knife of hardened spring band steel (without teeth) |
1 x | Broca de alta duração de 0.3mm |
1 x | Tool holder type H for SWH 1-A |
1 x | Multipurpose Vices Primus100 |
1 x | Gear Chuck |
1 x | SmartProg2 |
2 x | EUROline-Conductive set of pliers |
1 x | Warding files set, 6pcs |
1 x | surface planing and thicknessing ADH 250 |
1 x | MICROMOT tool holder |
1 x | CD-CLEANER 200ml |
1 x | Plastic magnifying glass |
1 x | Protective device for hand-operated MICROMOT |
1 x | Precision caliper 500mm |
1 x | Earth wire |
1 x | Precision drill grinder FBS 12/EF |
1 x | Broca de ponto 8.00 x 3.15 |
1 x | Broca de alta duração de 0.8mm |
1 x | Sanding pads for OZI 220/E grit 150 |
1 x | Slot cutter 3.2mm |
1 x | Half round cutter 13mm |
1 x | Slot cutter 6.5mm |
1 x | Wire strippers 160mm |
1 x | Cutter head for copy and surface milling MT3 |
1 x | Combination pliers 160mm |
1 x | Combination pliers 210mm |
1 x | Combination pliers 185mm |
1 x | Cross-recess Screwdrivers 0 |
1 x | 6-piece TORX-screwdriver-set ESD |
1 x | Combination pliers 185mm |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Flat nose pliers 165mm |
1 x | Telephone pliers stright 165mm |
1 x | 6-piece screwdriver and cross-recess set |
1 x | Combination pliers 170mm |
![](images/pixel_black.gif) |
€19,669.29 |