2 x | SCREEN 200ml |
1 x | IC tweezers |
1 x | SPRAYFLON 200ml |
1 x | PROLUB 200ml |
1 x | PROTECTION 200ml |
1 x | TUNER 200ml |
1 x | Inspector mirror |
1 x | Cotton polishers |
2 x | Safety Insulated Phillips Screwdriver 14-631VDE |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
4 x | Broca de alta duração de 2.3mm |
1 x | Flexible silicon discs |
1 x | MICRO shaper MP 400 |
1 x | Compact workshop vacuum cleaner CW-matic |
1 x | Cross-recess Screwdrivers 000 |
1 x | Angle polisher WP/E |
3 x | broca de alta duração de 0,6mm |
1 x | Felt polishers |
3 x | Broca de alta duração de 2.5mm |
1 x | 2-speed scroll saw DSH |
1 x | Cross-recess Screwdrivers 00 |
2 x | Three piece thread cutting set |
2 x | Safety Insulated Phillips Screwdriver 14-634VDE |
1 x | Flexible silicon discs |
1 x | Polishing machine PM 100 |
1 x | MICRO-screwdrivers |
3 x | Broca de alta duração de 0.9mm |
1 x | POLISHER 200ml |
1 x | Cut off/mitre saw KGS 80 |
1 x | Long neck straight drill/grinder LB/E |
2 x | Broca de alta duração de 0.7mm |
3 x | Broca de alta duração de 1.4mm |
1 x | Scroll saw DS 230/E |
2 x | Lathe System PD 400 |
1 x | TIP SPT-9 |
1 x | Jig saw STS 12/E |
1 x | Hot wire cutter THERMOCUT 12/E |
2 x | Broca de alta duração de 0.4mm |
1 x | Flexible polishing pad set |
1 x | Professional Drill/Grinder IBS/E |
1 x | Table Saw FET |
1 x | TIP SPT-2 |
2 x | MICRO Miller FF 500 |
1 x | PRINTER 200ml |
2 x | Broca de alta duração de 2.1mm |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
2 x | ANTISTATIC 200ml |
2 x | Broca de alta duração de 2.2mm |
2 x | Broca de alta duração de 0.8mm |
2 x | Router base OFV |
1 x | 6-piece TORX-screwdriver-set |
1 x | Rebating cutter 6.4mm |
2 x | Insulation Resistance Tester MG125 |
1 x | 6-piece screwdriver and cross-recess set |
1 x | Slot cutter 5.0mm |
1 x | V-slot cutter 6.5mm |
2 x | TIP SPT-10 |
2 x | Broca de alta duração de 1.5mm |
2 x | TIP SPT-6 |
2 x | HSS boring tool set, 6 pieces |
2 x | FREEZER-BR 200ml |
1 x | Surface planer AH 80 |
1 x | Cotton polishers |
2 x | Broca de alta duração de 1.3mm |
1 x | Machine Vice MS 4 |
1 x | Long neck angle grinder LHW |
1 x | Cotton polishers |
2 x | Table Sawr TKS 315 E |
1 x | MICRO Miller MF 70 |
3 x | Precision steel vice PM 40 |
1 x | Disc Sander TG 250/E |
1 x | Broca de alta duração de 3.0mm |
1 x | Edge cutter with pin 6.4mm |
1 x | TIP SPT-4 |
2 x | Bench drill machine TBM 220 |
1 x | Cylinder sander WAS/E |
2 x | Broca de alta duração de 0.5mm |
1 x | Precision Vice FMZ |
3 x | Precision lathe PD 250/E |
2 x | Safety Insulated Phillips Screwdriver 14-633VDE |
2 x | Angle cutter 45 ° |
1 x | 6-piece screwdriver and cross-recess set |
1 x | MICROMOT 230/E |
2 x | Universal holder UHZ |
3 x | Broca de alta duração de 2.4mm |
1 x | Felt polishers |
3 x | broca de alta duração de 0,2mm |
1 x | Grinding and Polishing Machine SP/E |
3 x | Multipurpose Vices Primus100 |
1 x | Cross-recess Screwdrivers 1 |
2 x | Broca de alta duração de 1.0mm |
1 x | MICROFLAM gas soldering set MGS |
2 x | Multipurpose Vices Primus 75 |
1 x | Long neck angle milling/drilling unit LWB 220/E |
1 x | Precision Drill/Grinder FBS 240/E |
2 x | Broca de alta duração de 1.2mm |
1 x | MICRO Band Saw MBS 240/E |
1 x | MICROMOT 50/EF |
1 x | Flexible polishing pad set |
1 x | Combi cutter 6.5/2.5mm |
2 x | Broca de alta duração de 0.3mm |
2 x | Broca de alta duração de 2.0mm |
2 x | Belt sander BBS/S |
1 x | MICRO cutter MIC |
2 x | Bench drill press TBH |
1 x | Core box bit 3.2mm |
1 x | Super jig saw STS/E |
1 x | Hot wire cutter THERMOCUT 650 |
2 x | 10-piece wood router cutter set |
1 x | 6pcs Double Open End wrench set |
1 x | Engraving tool GG |
1 x | Hot wire cutter THERMOCUT 230/E |
1 x | Complete Engraving Kit with trial glass |
1 x | MICRO woodturning lathe DB 250 |
1 x | Slot cutter 3.2mm |
2 x | TIP SPT-3 |
1 x | 6-piece screwdriver and cross-recess set |
1 x | DUSTER-BR 200ml |
1 x | Broca de alta duração de 1.1mm |
2 x | Super-fine sanding discs grain 400 |
1 x | Wood Lathe DB900 |
3 x | sanding belts for BBS/s Grit 240 |
1 x | Universal polishing paste |
4 x | Backing disc for LWS |
1 x | Super safety and specialty bit set, 75-piece |
1 x | BeeHive208S |
1 x | Broca de ponto 6.30 x 2.50 |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
3 x | 14-piece parallel supports set |
1 x | Professional polishing sponge |
1 x | Tungstein carbide rasp - and cutting disc |
1 x | Bandsaw blade of bimetal for MBS 240/E |
2 x | Sanding pads for OZI 220/E grit 80 |
2 x | Professional set for finish grinding and polishing |
2 x | Safety insulated screwdrivers 14-603 VDE |
4 x | Tungsten Carbide Tipped (TCT) |
2 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | Radius Cutting Attachment, complete with pointed tool |
2 x | HSS cutting blade for OZI |
1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
1 x | Diamond cutting blade for OZI |
2 x | Coarse-toothed (10 TPI per 25mm) |
1 x | Three jaw chuck for the lathe DB 250 |
1 x | Safety Insulated Pozidriv Screwdriver 14-643VDE |
1 x | Ball-shaped diamond coated 1.2mm |
2 x | Blade holders for DS 460 |
2 x | Spiral blade. 125mm long with plain ends (without pins). |
1 x | Band knife of hardened spring band steel (without teeth) |
1 x | Centre Turning Attachment |
2 x | Safety insulated screwdrivers 14-606 VDE |
2 x | Dividing attachment TA 230 for PF 250 |
2 x | Mill/Drill Unit BFB 2000. |
1 x | sanding belts for BBS/s Grit 80 |
1 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
2 x | Lambswool polishing disc |
3 x | sanding belts for BBS/s Grit 150 |
1 x | Wolfram vanadium steel milling bits |
1 x | Broca de alta duração de 2.9mm |
1 x | Safety Insulated Phillips Screwdriver 14-632VDE |
2 x | Sanding pads for OZI 220/E grit 150 |
1 x | Broca de ponto 3.15 x 1.00 |
1 x | Protective device for hand-operated MICROMOT |
2 x | Three-jaw steel drill chuck |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Gear Chuck |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
2 x | Coarse-toothed (25 TPI per 25mm) |
2 x | Aluminium Die-Cast |
1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
4 x | MICRO Miller FF 230 |
1 x | Super-fine sanding discs grain 2000 |
1 x | HSS immersion saw blades for OZI |
2 x | Replacement cutting disc for MICRO cutter MIC |
1 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
2 x | Sanding pads for OZI 220/E grit 240 |
1 x | Tungsten carbide drills Ø1,5mm |
2 x | Safety insulated screwdrivers 14-608 VDE |
2 x | Coarse-toothed (18 TPI per 25mm) |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | MICROMOT extension cord. 300cm. |
1 x | Tungsten carbide cutters set |
1 x | HSS immersion saw blades for OZI |
2 x | Safety insulated screwdrivers 14-601 VDE |
1 x | Safety insulated screwdrivers 14-602 VDE |
2 x | Microfibre cloth |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Fixed Steady |
1 x | Tungsten carbide drills Ø1mm |
2 x | Cutting disc, with reinforcement |
2 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | Mill/Drill System BFW 40/E |
1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | Screwdriver bit set. 49-piece. |
1 x | Wood Lathe DB450 |
1 x | Tungsten carbide drills Ø2mm |
1 x | Independent four jaw chuck for the DB 250 |
1 x | Ball-shaped diamond coated 2.2mm |
1 x | Insulation Resistance Tester MG500 |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Tungsten tipped saw blade |
1 x | Ball-shaped diamond coated 3.2mm |
1 x | Safety insulated screwdrivers 14-604 VDE |
1 x | Super-fine sanding discs grain 000 |
1 x | Safety Insulated Pozidriv Screwdriver 14-644VDE |
1 x | Ball shaped milling cutters |
1 x | Belt sander BS/E |
1 x | Diamond-coated cutting disc for MIC |
2 x | Polishing felt, medium hard |
1 x | OPTI BF20L VARIO |
1 x | Broca de ponto 5.00 x 2.00 |
1 x | Five piece HSS chisel set |
1 x | Safety Insulated Pozidriv Screwdriver 14-641VDE |
1 x | Self-adhesive silicone film for easy sanding disc replacement |
1 x | Broca de ponto 8.00 x 3.15 |
1 x | Flexishaft MICROMOT 110/P |
1 x | Collet Set for accurate use on round components |
1 x | Bench Circular Saw KS 230 |
1 x | Micro Compound Table KT 70 |
2 x | Grinding mop cylinder grit 80 |
1 x | Corundum bound cutting disc for LWS |
1 x | End milling cutter kit HSS 20 pcs |
1 x | Step clamps made of steel |
1 x | Super-Cut |
1 x | Hand magnifier with LED light 3X |
1 x | Grinding mop cylinder grit 120 |
1 x | Fluted filter for CW-matic |
1 x | Corundum sanding discs for LWS |
1 x | Replacement cutting wire for the THERMOCUT 12/E |
1 x | Special Fused Alumina (Hardness N). |
1 x | MICROMOT Mains Adapter NG 5/E |
1 x | Diamond Coated |
|
€35,937.06 |