| 4 x | Steel tape measure |
| 1 x | Hand magnifier with LED light 3X |
| 1 x | Plastic magnifying glass |
| 1 x | magnifier 3.25 x Ø 45mm with additional lens |
| 1 x | Insulation Resistance Tester MG125 |
| 2 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
| 1 x | Milling cutter set (2 - 5mm) |
| 3 x | Footswitch FS |
| 2 x | Core box bit 3.2mm |
| 2 x | Blade for Wood and Plastics |
| 1 x | Ceramic-tipped tweezers and ESD 5-096 |
| 2 x | Half round cutter 13mm |
| 1 x | Blade guides separately |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Screwdriver bit set. 49-piece. |
| 2 x | ESD Tweezers 5-194 |
| 2 x | ESD Tweezers 5-195 |
| 3 x | 10-piece wood router cutter set |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 2 x | ESD Brushe |
| 1 x | Combi cutter 6.5/2.5mm |
| 2 x | Tungsten Carbide Tipped (TCT) |
| 1 x | sandpaper for PS 13 Grit 240 |
| 3 x | Tungsten carbide cutters set |
| 3 x | ESD Tweezers 5-191 |
| 3 x | Independent four jaw chuck for the DB 250 |
| 2 x | Replacement cutting disc for MICRO cutter MIC |
| 2 x | Blade for Steel and brass |
| 3 x | Conj 5 pinças ESD |
| 3 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
| 2 x | EUROline-Conductive set of pliers |
| 2 x | Angle cutter 45 ° |
| 1 x | Fibre-Cut Discs |
| 2 x | Chuck for TBM 220 |
| 2 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
| 3 x | ESD Brushe |
| 2 x | Ceramic-tipped tweezers and ESD 5-095 |
| 3 x | Felt cloth polishing disc (100 x 15mm) |
| 2 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
| 1 x | sandpaper for PS 13 Grit 400 |
| 3 x | Machine Vice MS 4 |
| 2 x | ESD Tweezers 5-193 |
| 3 x | ACCENT SERVICE TOOLS SET |
| 2 x | Step clamps made of steel |
| 5 x | |
| 1 x | Broca de alta duração de 2.4mm |
| 3 x | Diamond Cutting Discs |
| 2 x | 6-piece set of ESD/EGB tweezers |
| 2 x | Diamond Cutting Discs |
| 1 x | sandpaper for PS 13 Grot 180 |
| 4 x | Micro Compound Table KT 70 |
| 5 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 3 x | Three jaw chuck for the lathe DB 250 |
| 2 x | ESD Tweezers 5-192 |
| 2 x | TIP SPT-10 |
| 2 x | Compact workshop vacuum cleaner CW-matic |
| 2 x | Microfibre polishing wheel, 15-ply (100mm) |
| 1 x | Edge cutter with pin 6.4mm |
| 2 x | Precision steel vice PM 40 |
| 2 x | Band knife of hardened spring band steel (without teeth) |
| 1 x | Five piece HSS chisel set |
| 2 x | Polishing Set |
| 1 x | Rounding over cutter 6.4mm |
| 3 x | Diamond Cutting Discs |
| 1 x | Slot cutter 3.2mm |
| 3 x | Diamond-coated cutting disc for MIC |
| 2 x | Rebating cutter 6.4mm |
| 4 x | Universal polishing paste |
| 3 x | Bandsaw blade of bimetal for MBS 240/E |
| 3 x | Grinding mop cylinder grit 80 |
| 1 x | TIP SPT-6 |
| 1 x | Fibre-Cut Discs |
| 1 x | V-slot cutter 6.5mm |
| 1 x | Slot cutter 5.0mm |
| 1 x | Diamond blade for MBS 240/E |
| 1 x | Slot cutter 6.5mm |
| 2 x | Diamond Cutting Discs |
| 2 x | Polishing machine PM 100 |
| 3 x | magnetic base 80kg |
| 1 x | Conjunto de três brocas de ponto |
| 1 x | Flap Wheels |
| 1 x | Flexible silicon discs |
| 3 x | Dial gauge |
| 2 x | Pensander PS 13 |
| 2 x | Precision caliper square |
| 3 x | sanding belts for BBS/s Grit 240 |
| 3 x | Magnetic base |
| 2 x | Digital caliper gauge 300 mm |
| 2 x | Router base OFV |
| 2 x | Professional set for finish grinding and polishing |
| 1 x | Spare cutting wire |
| 2 x | Flap Wheels |
| 1 x | Sanding Drums |
| 2 x | MICROMOT Mains Adapter NG 2/E |
| 1 x | Diamond Twist Drills |
| 1 x | Wheels brushes |
| 1 x | Sanding Discs |
| 1 x | Ball-shaped diamond coated 1.2mm |
| 2 x | Cylinder sander WAS/E |
| 2 x | Lever Dial Indicator |
| 1 x | HSS drill bits 0.8mm |
| 1 x | Felt polishers |
| 2 x | Jig saw blades made of HSS |
| 1 x | TIP SPT-3 |
| 1 x | HSS drill bits 0.5mm |
| 3 x | MICROMOT Mains Adapter NG 2/S |
| 2 x | Diamond Grinding Bits 1,8mm |
| 1 x | Felt polishers |
| 2 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 2 x | Precision caliper 500mm |
| 1 x | Felt polishers |
| 3 x | Diamond Coated |
| 1 x | ESD-handling set |
| 1 x | HSS drill bits 1.2mm |
| 2 x | Tungsten carbide drills Ø1,5mm |
| 1 x | Stainless steel brushes |
| 1 x | Stainless steel wheels |
| 2 x | Disc Sander TG 250/E |
| 1 x | Flexible polishing pad set |
| 3 x | Belt sander BBS/S |
| 2 x | ESD-handling ser 9-361 |
| 1 x | Sanding bands 14x13mm |
| 2 x | Floor cover ESD |
| 2 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 2 x | Grinding and Polishing Machine SP/E |
| 1 x | Cotton polishers |
| 1 x | Sanding Drums |
| 1 x | Flexible polishing pad set |
| 1 x | Inspector mirror |
| 2 x | Diamond Grinding Bits 1,8mm |
| 1 x | Sanding Discs |
| 1 x | Supercut jig saw blades of special steel |
| 1 x | Tungsten carbide drills Ø1mm |
| 3 x | Corundum fan sander for LWS |
| 1 x | Diamond Grinding Bits 5mm |
| 1 x | Steel brushes |
| 1 x | Brass brushes |
| 1 x | Disc Sander TG 125/E |
| 1 x | Sanding Drums |
| 1 x | Nylon Fleece Brushes |
| 1 x | Special Fused Alumina (Hardness N). |
| 2 x | Long neck angle grinder LHW |
| 3 x | Earthing module |
| 1 x | HSS twist drill set with centring pin |
| 1 x | HSS drill bits 1.6mm |
| 2 x | Diamond Grinding Bits 1mm |
| 2 x | Tungsten carbide drills Ø2mm |
| 3 x | PRECISION WIRE STRIPPER ESD-PLUS |
| 1 x | Replacement carving blades for MSG |
| 2 x | sanding belts for BBS/s Grit 80 |
| 1 x | Cutting disc, with reinforcement |
| 1 x | Coarse-toothed (18 TPI per 25mm) |
| 1 x | Flexishaft MICROMOT 110/P |
| 1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
| 1 x | Super-Cut |
| 2 x | Earth wire |
| 3 x | Tool holder for rotary tools |
| 2 x | 14-piece parallel supports set |
| 3 x | Backing disc for LWS |
| 1 x | Jig saw STS 12/E |
| 2 x | Mini side cutters EUROline-Conductive |
| 2 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 3 x | Replacement belts for BSL 220/E |
| 1 x | 6-piece screwdriver set ESD |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Aluminium Die-Cast |
| 1 x | Corundum grinding disc for LWS |
| 1 x | Earth wire |
| 1 x | MICROMOT glue gun HKP 220 |
| 1 x | Tungsten tipped saw blade |
| 2 x | Grinding mop cylinder grit 240 |
| 2 x | Surface planer AH 80 |
| 1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 2 x | Tungstein carbide rasp - and cutting disc |
| 3 x | 2-speed scroll saw DSH |
| 1 x | HSS boring tool set, 6 pieces |
| 2 x | Corundum sanding discs for LWS |
| 1 x | Multiform grindstone |
| 4 x | Centre Turning Attachment |
| 2 x | MICRO cutter MIC |
| 1 x | HSS immersion saw blades for OZI |
| 1 x | Mill/Drill Unit BFB 2000. |
| 2 x | Engraving tool GG |
| 1 x | End side cutters EUROline-Conductive |
| 1 x | HSS cutting blade for OZI |
| 1 x | Table Saw FET |
| 1 x | Sanding pads for OZI 220/E grit 240 |
| 3 x | Grinding mop cylinder grit 120 |
| 1 x | Bench drill press TBH |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | Belt sander BS/E |
| 2 x | Corundum fan sander for LWS |
| 1 x | 6-piece wrench key set ESD |
| 1 x | Crosscut 'Super-Cut' blade |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | MICROMOT steel collet set |
| 1 x | Replacement belts for BSL 220/E |
| 2 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 1 x | MICRO-screwdrivers |
| 1 x | Scroll saw DS 230/E |
| 1 x | MICROMOT Mains Adapter NG 5/E |
| 1 x | Side cutters EUROline-Conductive |
| 2 x | Sanding fleece for LWS |
| 2 x | MICRO shaper MP 400 |
| 1 x | Four Jaw Chuck |
| 1 x | MICRO woodturning lathe DB 250 |
| 1 x | Complete Engraving Kit with trial glass |
| 1 x | Tungsten carbide cutter 2.0mm |
| 1 x | Flexishaft MICROMOT 110/BF |
| 2 x | Saw blade made of high-alloy special steel |
| 2 x | MICRO Band Saw MBS 240/E |
| 2 x | Super jig saw STS/E |
| 1 x | End side cutters 45º EUROline-Conductive |
| 1 x | Thicknesser DH 40 |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 1 x | Earth wire with dummy Schunko-plug |
| 1 x | Coarse-toothed (10 TPI per 25mm) |
| 2 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
| 2 x | sanding belts for BBS/s Grit 150 |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 1 x | MICROMOT extension cord. 300cm. |
| 2 x | Corundum bound cutting disc for LWS |
| 1 x | Gear Chuck |
| 2 x | Fluted filter for CW-matic |
| 1 x | Three piece thread cutting set |
| 1 x | Delta sander OZI/E |
| 1 x | Lathe System PD 400 |
| 3 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 1 x | Corundum grinding disc for LWS |
| 1 x | Ball-shaped diamond coated 2.2mm |
| 1 x | Tungsten carbide cutter 1.0mm |
| 1 x | Motor-driven carving device MSG |
| 1 x | Bench drill machine TBM 220 |
| 1 x | Dividing attachment TA 230 for PF 250 |
| 1 x | Diamond blade |
| 1 x | Universal and oil siphoning pump AP 12 |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 1 x | Collet Set for accurate use on round components |
| 2 x | Corundum sanding discs for LWS |
| 1 x | 6-piece socket wrenches ESD |
| 1 x | Replacement cutting wire for the THERMOCUT 12/E |
| 2 x | Three-jaw steel drill chuck |
| 1 x | MICROFLAME burner MFB/E |
| 1 x | Sanding fleece for LWS |
| 1 x | Bench Circular Saw KS 230 |
| 1 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
| 1 x | Replacement belts for BSL 220/E |
| 2 x | Radius Cutting Attachment, complete with pointed tool |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Tungsten carbide cutter 3.0mm |
| 2 x | Solid carbide saw blade |
| 1 x | MICROFLAM gas soldering set MGS |
| 1 x | Grinding mop cylinder grit 120 |
| 1 x | Replacement glue sticks for HKP 220 |
| 1 x | Ball-shaped diamond coated 3.2mm |
| 3 x | Lambswool polishing disc |
| 1 x | Wrench Keys 0.7 |
| 1 x | Mill/Drill System BFW 40/E |
| 2 x | Professional polishing sponge |
| 1 x | Cotton polishers |
 |
| €19,575.82 |
