| 1 x | Disc Sander TG 250/E |
| 1 x | SMD Tweezers 5-054 |
| 2 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
| 1 x | Disc Sander TG 125/E |
| 3 x | Belt sander BBS/S |
| 1 x | Long neck angle grinder LHW |
| 1 x | SMD Tweezers 5-075 |
| 1 x | BIT-SET |
| 1 x | Angle polisher WP/E |
| 2 x | Cutting tools of high quality cobalt HSS steel, ground |
| 2 x | Diamond-coated cutting disc for MIC |
| 1 x | Combination pliers 185mm |
| 1 x | Round nose pliers 185mm |
| 2 x | ESD Tweezers 5-193 |
| 1 x | Fluted filter for CW-matic |
| 3 x | Steel brushes |
| 2 x | Polishing Set |
| 2 x | Ceramic-tipped tweezers and ESD 5-095 |
| 1 x | Ball-shaped diamond coated 3.2mm |
| 1 x | Pensander PS 13 |
| 2 x | Hot wire cutter THERMOCUT 230/E |
| 2 x | ESD Tweezers 5-192 |
| 2 x | Felt polishers |
| 2 x | Corundum fan sander for LWS |
| 2 x | Replacement cutting disc for MICRO cutter MIC |
| 1 x | Hot wire cutter THERMOCUT 12/E |
| 1 x | Diamond Twist Drills |
| 1 x | Wire strippers 160mm |
| 2 x | ESD Brushe |
| 1 x | Wire strippers 165mm |
| 2 x | ESD Tweezers 5-195 |
| 2 x | ESD Tweezers 5-191 |
| 1 x | Self-adhesive silicone film for easy sanding disc replacement |
| 1 x | Special Fused Alumina (Hardness N). |
| 3 x | Diamond Grinding Bits 1,8mm |
| 4 x | Wheels brushes |
| 2 x | 6-piece set of ESD/EGB tweezers |
| 2 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Steel wheels |
| 1 x | Fibre-Cut Discs |
| 1 x | TIP SPT-9 |
| 1 x | TIP SPT-2 |
| 1 x | Fibre-Cut Discs |
| 2 x | Hot wire cutter THERMOCUT 650 |
| 1 x | Tungstein carbide rasp - and cutting disc |
| 1 x | Silicon-Carbide. |
| 3 x | Diamond Grinding Bits 1mm |
| 2 x | Ceramic-tipped tweezers and ESD 5-096 |
| 1 x | PLCC Puller |
| 2 x | Ball-shaped diamond coated 1.2mm |
| 4 x | Brass brushes |
| 1 x | Tool holder type H for SWH 1-A |
| 2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 2 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
| 2 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 2 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Cross-recess Screwdrivers Pozidriv 2 |
| 1 x | Stainless steel cups |
| 2 x | Sanding fleece for LWS |
| 2 x | Fine dust paper filter for CW-matic |
| 1 x | Side cutters 160mm |
| 1 x | Side cutters 170mm |
| 3 x | Sanding fleece for LWS |
| 1 x | Telephone pliers bent 165mm |
| 2 x | Stainless steel wheels |
| 1 x | Telephone pliers bent 205mm |
| 1 x | Diamond Cutting Discs |
| 2 x | Diamond Cutting Discs |
| 1 x | ESD-handling ser 9-361 |
| 1 x | Felt polishers |
| 2 x | Corundum sanding discs for LWS |
| 1 x | Telephone pliers stright 165mm |
| 3 x | ESD Tweezers 5-194 |
| 1 x | sandpaper for PS 13 Grot 180 |
| 1 x | TIP SPT-3 |
| 1 x | Floor cover ESD |
| 2 x | Stainless steel brushes |
| 1 x | Cups brushes |
| 3 x | Diamond Cutting Discs |
| 2 x | Conj 5 pinças ESD |
| 1 x | Fibre-Cut Discs |
| 1 x | Corundum fan sander for LWS |
| 2 x | sandpaper for PS 13 Grit 400 |
| 2 x | Flexible polishing pad set |
| 2 x | Diamond Cutting Discs |
| 2 x | Steel cups |
| 2 x | Fibre-Cut Discs |
| 1 x | Cylinder sander WAS/E |
| 1 x | Precision lathe PD 250/E |
| 1 x | TIP SPT-4 |
| 1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 1 x | Spare cutting wire |
| 1 x | Diamond Grinding Bits 1,8mm |
| 1 x | ESD-handling set |
| 1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
| 1 x | TIP SPT-10 |
| 1 x | Beeprog2C |
| 2 x | Corundum grinding disc for LWS |
| 1 x | Diamond-coated cutting and roughing disc |
| 1 x | Corundum bound cutting disc for LWS |
| 1 x | Combination pliers 170mm |
| 1 x | TUNER 200ml |
| 2 x | Ball-shaped diamond coated 2.2mm |
| 1 x | ESD Brushe |
| 1 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
| 2 x | Diamond Grinding Bits 5mm |
| 1 x | HSS drill bits 1.0mm |
| 1 x | Blade guides separately |
| 1 x | HSS drill bits 1.2mm |
| 3 x | Inpection mirror 1-978 |
| 2 x | Felt polishers |
| 1 x | Core box bit 3.2mm |
| 2 x | Tungsten carbide cutters set |
| 2 x | Centre Turning Attachment |
| 1 x | Screwdriver 5.5 |
| 2 x | Earth wire with dummy Schunko-plug |
| 1 x | Polishing paste |
| 1 x | Cotton polishers |
| 2 x | Belt sander BS/E |
| 1 x | sanding belts for BBS/s Grit 80 |
| 1 x | Cut off/mitre saw KGS 80 |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 2 x | Gear Chuck |
| 2 x | High quality corundum grinding bits |
| 1 x | EUROline-Conductive set of pliers |
| 1 x | Mill/Drill Unit BFB 2000. |
| 1 x | Felt cloth polishing disc (100 x 15mm) |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | MICROMOT Mains Adapter NG 2/S |
| 1 x | Jig saw STS 12/E |
| 2 x | HSS immersion saw blades for OZI |
| 1 x | 10-piece wood router cutter set |
| 1 x | Rounding over cutter 6.4mm |
| 3 x | 14-piece parallel supports set |
| 1 x | Diamond Coated |
| 1 x | High quality corundum grinding bits |
| 1 x | Independent four jaw chuck for the DB 250 |
| 1 x | Tungsten carbide drills Ø1,5mm |
| 2 x | Four Jaw Chuck |
| 1 x | Corundum sanding discs for LWS |
| 1 x | Lambswool polishing disc |
| 1 x | Milling cutter set (2 - 5mm) |
| 2 x | Cotton polishers |
| 1 x | Slot cutter 6.5mm |
| 3 x | Felt polishers |
| 1 x | Cotton polishers |
| 1 x | Earthing module |
| 2 x | Bench Circular Saw KS 230 |
| 1 x | Screwdriver 4.0 |
| 1 x | Boring Bar for CCMT 8mm |
| 2 x | Fixed Steady |
| 1 x | Sanding pads for OZI 220/E grit 150 |
| 1 x | Corundum grinding disc for LWS |
| 1 x | HSS drill bits 1.6mm |
| 1 x | MICROMOT extension cord. 300cm. |
| 1 x | Disc cutters |
| 1 x | Bench drill press TBH |
| 1 x | Tungsten tipped saw blade |
| 1 x | HSS drill bits 0.8mm |
| 2 x | Super safety and specialty bit set, 75-piece |
| 1 x | Chuck for TBM 220 |
| 1 x | Micro Compound Table KT 70 |
| 1 x | HSS twist drill set to DIN 338 |
| 1 x | MICRO Band Saw MBS 240/E |
| 1 x | Blade for Steel and brass |
| 2 x | Universal and oil siphoning pump AP 12 |
| 2 x | High quality corundum grinding bits |
| 2 x | High quality corundum grinding bits |
| 1 x | Scroll saw DS 230/E |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 1 x | Diamond cutting blade for OZI |
| 1 x | Earth wire |
| 1 x | sanding belts for BBS/s Grit 240 |
| 3 x | Tungsten Carbide Tipped (TCT) |
| 1 x | Thicknesser DH 40 |
| 1 x | Slot cutter 5.0mm |
| 1 x | Conjunto de três brocas de ponto |
| 1 x | Grinding mop cylinder grit 80 |
| 1 x | Step clamps made of steel |
| 1 x | High quality corundum grinding bits |
| 1 x | HSS immersion saw blades for OZI |
| 2 x | Precision steel vice PM 40 |
| 1 x | Radius Cutting Attachment, complete with pointed tool |
| 1 x | Tungsten carbide cutter 2.0mm |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 2 x | sanding belts for BBS/s Grit 150 |
| 1 x | Flexible silicon discs |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | Sanding Drums |
| 1 x | MICROMOT Mains Adapter NG 2/E |
| 1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 1 x | Edge cutter with pin 6.4mm |
| 1 x | Super-Cut |
| 1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
| 1 x | Coarse-toothed (18 TPI per 25mm) |
| 1 x | Collet Set for accurate use on round components |
| 1 x | Cutting disc, with reinforcement |
| 1 x | Lathe System PD 400 |
| 1 x | MICROMOT Mains Adapter NG 5/E |
| 1 x | Sanding pads for OZI 220/E grit 80 |
| 1 x | Band knife of hardened spring band steel (without teeth) |
| 1 x | Replacement carving blades for MSG |
| 1 x | Microfibre cloth |
| 1 x | Flexible silicon discs |
| 1 x | Machine Vice MS 4 |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 1 x | Crocodile clip |
| 1 x | Wolfram vanadium steel milling bits |
 |
| €13,161.98 |
