| 3 x | PLCC Puller |
| 1 x | Blade guides separately |
| 1 x | Felt polishers |
| 1 x | Four Jaw Chuck |
| 3 x | MICRO cutter MIC |
| 1 x | Cotton polishers |
| 1 x | DIL24/QSOP24 ZIF 150mil |
| 1 x | DIL40/SOIC20 ZIF MB95-1 |
| 1 x | BGA-Bottom-111 |
| 5 x | Tungsten carbide cutter 3.0mm |
| 1 x | Collet Set for accurate use on round components |
| 3 x | TORQUE-SCREWDRIVER 1.5 - 4.0 Nm |
| 5 x | Flexishaft MICROMOT 110/BF |
| 1 x | BGA-Bottom-105 |
| 1 x | Bandsaw blade of bimetal for MBS 240/E |
| 1 x | DIL32/PLCC84 ZIF HS3334ESCF1H |
| 1 x | Broca de alta duração de 0.3mm |
| 1 x | Broca de alta duração de 1.1mm |
| 1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
| 1 x | Multipurpose Vices Primus100 |
| 1 x | Broca de alta duração de 1.5mm |
| 3 x | Blade for Steel and brass |
| 1 x | DIL40/PLCC44 ZIF PIC-1 |
| 2 x | Universal holder UHZ |
| 2 x | Flexible silicon discs |
| 1 x | Polishing paste |
| 2 x | broca de alta duração de 0,2mm |
| 2 x | Lathe System PD 400 |
| 3 x | Diamond Twist Drills |
| 2 x | Diamond Grinding Bits 1,8mm |
| 2 x | Radius Cutting Attachment, complete with pointed tool |
| 3 x | Three-jaw steel drill chuck |
| 1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
| 3 x | Universal polishing paste |
| 5 x | Special Fused Alumina (Hardness N). |
| 2 x | Ball-shaped diamond coated 3.2mm |
| 2 x | Handy 1515 |
| 2 x | Ball-shaped diamond coated 1.2mm |
| 1 x | MICROMOT extension cord. 300cm. |
| 1 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
| 1 x | DIL24W/SOIC24 ZIF 300mil |
| 1 x | Cotton polishers |
| 1 x | DIL48/SDIP56 ZIF 68HC05Bx |
| 1 x | Ball-shaped diamond coated 2.2mm |
| 1 x | Band knife of hardened spring band steel (without teeth) |
| 1 x | BGA-Bottom-115 |
| 1 x | Broca de alta duração de 2.2mm |
| 1 x | TU 1503V |
| 1 x | Bench drill press TBH |
| 1 x | Broca de alta duração de 1.0mm |
| 3 x | Machine Vice MS 4 |
| 1 x | MICROMOT tool holder |
| 2 x | Centre Turning Attachment |
| 1 x | BGA-Bottom-10 |
| 1 x | Diamond blade for MBS 240/E |
| 1 x | Bottom PSOP44 NOR-1 |
| 1 x | DIL40/TQFP44 ZIF EM652X |
| 1 x | Broca de alta duração de 2.6mm |
| 5 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 1 x | Broca de alta duração de 0.8mm |
| 4 x | Spare cutting wire |
| 2 x | 6-piece screwdriver and cross-recess set |
| 2 x | MICROMOT drill stand MB 200 |
| 2 x | 6-piece screwdriver and cross-recess set |
| 2 x | Broca de alta duração de 2.0mm |
| 3 x | Silicon-Carbide. |
| 4 x | Rounding over cutter 6.4mm |
| 2 x | Hot wire cutter THERMOCUT 12/E |
| 3 x | Engraving tool GG |
| 4 x | TIP SPT-10 |
| 2 x | High quality corundum grinding bits |
| 1 x | Solid carbide saw blade |
| 2 x | Mini side cutters EUROline-Conductive |
| 2 x | End side cutters EUROline-Conductive |
| 2 x | Fibre-Cut Discs |
| 2 x | TIP SPT-6 |
| 2 x | MICROFLAME burner MFB/E |
| 2 x | MICRO-screwdrivers |
| 2 x | Compact workshop vacuum cleaner CW-matic |
| 2 x | Diamond Cutting Discs |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | Sanding Drums |
| 1 x | EUROline-Conductive set of pliers |
| 2 x | Diamond Cutting Discs |
| 7 x | Rebating cutter 6.4mm |
| 3 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 3 x | Dividing attachment TA 230 for PF 250 |
| 4 x | Delta sander OZI/E |
| 1 x | Universal and oil siphoning pump AP 12 |
| 4 x | Flame shaped milling cutters |
| 4 x | Protective device for hand-operated MICROMOT |
| 3 x | High quality corundum grinding bits |
| 2 x | Fibre-Cut Discs |
| 4 x | Inspector mirror |
| 2 x | Long neck angle grinder LHW |
| 6 x | Set of special steel cutters |
| 5 x | Aluminium Die-Cast |
| 5 x | 10-piece wood router cutter set |
| 9 x | Footswitch FS |
| 5 x | Slot cutter 3.2mm |
| 1 x | Side cutters EUROline-Conductive |
| 2 x | Fibre-Cut Discs |
| 4 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 2 x | Super-fine sanding discs grain 2000 |
| 6 x | Combi cutter 6.5/2.5mm |
| 2 x | Mill/Drill Unit BFB 2000. |
| 3 x | Hot wire cutter THERMOCUT 650 |
| 3 x | Wolfram vanadium steel milling bits |
| 5 x | Micro Compound Table KT 70 |
| 4 x | Replacement cutting wire for the THERMOCUT 12/E |
| 2 x | TIP SPT-3 |
| 7 x | Slot cutter 5.0mm |
| 3 x | Angle cutter 45 ° |
| 4 x | Core box bit 3.2mm |
| 1 x | Replacement belts for BSL 220/E |
| 2 x | Hot wire cutter THERMOCUT 230/E |
| 1 x | Coarse-toothed (18 TPI per 25mm) |
| 2 x | Diamond Cutting Discs |
| 1 x | Complete Engraving Kit with trial glass |
| 2 x | Table Sawr TKS 315 E |
| 3 x | Blade holders for DS 460 |
| 5 x | Half round cutter 13mm |
| 2 x | Diamond Cutting Discs |
| 2 x | Vacum SAA 901 |
| 2 x | MICROFLAM gas soldering set MGS |
| 3 x | |
| 6 x | Slot cutter 6.5mm |
| 2 x | Coarse-toothed (25 TPI per 25mm) |
| 3 x | Metal Cutting Blades |
| 1 x | MICRO Heat gun MH 550 |
| 1 x | MICROMOT glue gun HKP 220 |
| 2 x | High quality corundum grinding bits |
| 2 x | SmartProg2 |
| 1 x | Microfibre cloth |
| 2 x | MICROMOT steel collet set |
| 1 x | Super safety and specialty bit set, 75-piece |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | Screwdriver 1.5 |
| 5 x | High quality corundum grinding bits |
| 3 x | Cone shaped milling cutter |
| 4 x | Professional set for finish grinding and polishing |
| 2 x | Three jaw chuck for the lathe DB 250 |
| 4 x | Milling cutter set (2 - 5mm) |
| 4 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 1 x | Corundum sanding discs for LWS |
| 1 x | Steel cups |
| 3 x | Inpection mirror 1-978 |
| 1 x | Table Saw FET |
| 1 x | Fluted filter for CW-matic |
| 1 x | DIL48/QFN48 ZIF-CS |
| 2 x | Milling cutter set (6 - 10mm) |
| 3 x | Tungsten Carbide Tipped (TCT) |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 1 x | Stainless steel cups |
| 1 x | Broca de alta duração de 1.3mm |
| 2 x | Fine dust paper filter for CW-matic |
| 1 x | DIL32/QFP64 ZIF H8-1 |
| 5 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 1 x | DIL28/QFP64 ZIF H8/3644 |
| 1 x | Felt cloth polishing disc (100 x 15mm) |
| 1 x | Steel wheels |
| 5 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 1 x | DIL32/TSOP32 ZIF 11.8mm |
| 1 x | EUROline set of pliers |
| 1 x | Combination pliers 210mm |
| 1 x | DIL28/TSOP28 ZIF 11,8mm Flash |
| 2 x | HSS drill bits 1.2mm |
| 2 x | MICRO woodturning lathe DB 250 |
| 3 x | EUROline top cutter |
| 1 x | Blade for Wood and Plastics |
| 1 x | ESD Brushe |
| 2 x | Corundum grinding disc for LWS |
| 1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
| 1 x | Replacement cutting disc for MICRO cutter MIC |
| 1 x | EUROline side cutter pointed head |
| 2 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
| 1 x | DIL48/TSOP56 ZIF 18.4mm NOR-4 |
| 3 x | EUROline mini side cutter |
| 1 x | DIL48/LQFP64 ZIF M38039/M39049 |
| 1 x | Diamond-coated cutting and roughing disc |
| 2 x | Three piece thread cutting set |
| 1 x | DIL32/TSOP32 ZIF 12.4mm Flash |
| 2 x | Warding files set, 6pcs |
| 2 x | Thicknesser DH 40 |
| 1 x | Precision Vice FMS 75 |
| 1 x | DIL40/QFP64-3 ZIF NEC-1 |
| 1 x | EUROline mini side cutter |
| 1 x | DIL44/QFN44-2 ZIF-CS |
| 1 x | Five piece HSS chisel set |
| 2 x | Sanding fleece for LWS |
| 1 x | DIL40/QFP144 ZIF H8S-1 |
| 1 x | Corundum fan sander for LWS |
| 1 x | HSS drill bits 1.6mm |
| 2 x | Super-Cut |
| 2 x | 14-piece parallel supports set |
| 1 x | DIL40/TSOP40 ZIF 18.4mm Flash-1 |
| 2 x | Microfibre polishing wheel, 15-ply (100mm) |
| 3 x | EUROline side cutter rounded head |
| 1 x | Scroll saw DS 230/E |
| 1 x | Sanding pads for OZI 220/E grit 240 |
| 3 x | Super-fine sanding discs grain 400 |
| 1 x | OPTI BF20 VARIO |
| 3 x | DEGRESER 200ml |
| 3 x | Angle polisher WP/E |
| 2 x | Cutting tools of high quality cobalt HSS steel, ground |
| 3 x | Pensander PS 13 |
| 1 x | High quality corundum grinding bits |
| 1 x | Lambswool polishing disc |
| 4 x | Multiform grindstone |
| 4 x | Cylinder sander WAS/E |
| 2 x | Corundum fan sander for LWS |
| 1 x | Diamond Grinding Bits 1,8mm |
| 4 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
| 3 x | Cutting tools of high quality cobalt HSS steel, ground |
| 3 x | Precision steel vice PM 40 |
| 1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
| 3 x | Belt sander BBS/S |
| 2 x | surface planing and thicknessing ADH 200 |
| 1 x | Bench drill machine TBM 220 |
| 3 x | Tungsten carbide cutter 2.0mm |
| 1 x | MICRO Band Saw MBS 240/E |
| 1 x | Conj 5 pinças ESD |
| 2 x | Step clamps made of steel |
| 4 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
| 2 x | Glass fibre contact cleaner brush |
| 1 x | Super jig saw STS/E |
| 2 x | Tungsten carbide cutter 1.0mm |
| 1 x | Disc Sander TG 250/E |
| 1 x | EUROline round nose pliers |
| 1 x | MICRO shaper MP 400 |
| 1 x | High quality corundum grinding bits |
| 1 x | Brass contact cleaner brush |
| 1 x | Saw blade made of high-alloy special steel |
| 3 x | BeeHive204 |
| 1 x | Super-fine sanding discs grain 000 |
| 1 x | FLUX-OFF 400ml |
| 1 x | Diamond Coated |
| 3 x | Grinding and Polishing Machine SP/E |
| 2 x | Ball shaped milling cutters |
| 1 x | Precision caliper 500mm |
| 4 x | MICROMOT Mains Adapter NG 5/E |
| 2 x | CD-CLEANER 200ml |
| 1 x | Table Saw TKS 2500 SC |
| 4 x | Polishing felt, medium hard |
| 2 x | Magnetic base |
| 1 x | Precision lathe PD 250/E |
| 1 x | Cylindrical cutters |
| 3 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
| 2 x | Chuck for TBM 220 |
| 2 x | Belt sander BS/E |
| 2 x | magnetic base 80kg |
| 2 x | Solid carbide stylus for engraving |
| 3 x | surface planing and thicknessing ADH 250 |
| 2 x | Professional polishing sponge |
| 1 x | HSS drill bits 0.8mm |
| 3 x | Replacement carving blades for MSG |
| 1 x | Bench Circular Saw KS 230 |
| 1 x | CRIMPING PLIERS/WIRE STRIPPER |
| 1 x | Safety Insulated Pozidriv Screwdriver 14-642VDE |
| 1 x | Tungsten carbide drills Ø2mm |
| 2 x | Screwdriver bit set. 49-piece. |
| 3 x | Disc Sander TG 125/E |
| 2 x | Flexishaft MICROMOT 110/P |
| 1 x | Tungsten carbide drills Ø1mm |
| 1 x | Motor-driven carving device MSG |
| 2 x | HSS boring tool set, 6 pieces |
| 3 x | Spiral blade. 125mm long with plain ends (without pins). |
| 2 x | Glass fibre contact cleaner brush |
| 2 x | Surface planer AH 80 |
| 4 x | V-slot cutter 6.5mm |
| 2 x | Safety Insulated Pozidriv Screwdriver 14-641VDE |
| 2 x | STRIPPING TOOL WITH ADJUSTABLE KNIVES |
| 1 x | Jig saw STS 12/E |
| 2 x | Lever Dial Indicator |
| 1 x | EUROline flat nose pliers |
| 1 x | OPTI BF16 Vario |
| 1 x | Solid carbide stylus for engraving |
| 1 x | Wolfram vanadium steel milling bits |
| 4 x | MICROMOT Mains Adapter NG 2/S |
| 3 x | sanding belts for BBS/s Grit 240 |
| 1 x | OPTI BF20L VARIO |
| 2 x | Dial gauge |
| 1 x | TU 2404 |
| 1 x | Insert CCGT060202-AK |
| 1 x | Tungsten carbide cutters set |
| 1 x | Felt polishers |
| 1 x | TUNER 200ml |
| 3 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 1 x | Steel tape measure |
| 1 x | Precision caliper square |
| 1 x | Conjunto de três brocas de ponto |
| 1 x | Gear Chuck |
| 3 x | Polishing machine PM 100 |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | End milling cutter kit HSS 20 pcs |
| 1 x | Tool holder for rotary tools |
| 1 x | Safety Insulated Pozidriv Screwdriver 14-644VDE |
| 4 x | Edge cutter with pin 6.4mm |
| 1 x | Long neck straight drill/grinder LB/E |
| 4 x | sandpaper for PS 13 Grit 240 |
| 2 x | Self-adhesive silicone film for easy sanding disc replacement |
| 1 x | FLUX DISPENSING PEN, LEAD FREE |
| 2 x | sanding belts for BBS/s Grit 150 |
| 1 x | HSS drill bits 1.0mm |
| 1 x | Replacement glue sticks for HKP 220 |
| 1 x | Beeprog2C |
| 1 x | Supercut jig saw blades of special steel |
| 1 x | MICRO Miller FF 500 |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 1 x | Jig saw blades made of HSS |
| 1 x | ESD-handling set |
| 2 x | sandpaper for PS 13 Grot 180 |
| 1 x | MICROMOT 50 |
| 1 x | Pinça SOIC de 8 pinos |
| 1 x | Morse taper MT2 - B16 |
| 1 x | Tungsten carbide drills Ø1,5mm |
| 1 x | ESD-handling ser 9-361 |
| 1 x | Router base OFV |
| 1 x | Crimping plier for BNC |
| 1 x | PRECISION WIRE STRIPPER ESD-PLUS |
| 1 x | MICROMOT 50/E |
| 1 x | Disc cutters |
| 1 x | PLCC Extractor |
| 1 x | 6-piece screwdriver and cross-recess set |
| 1 x | MULTI 200ml |
| 1 x | MICROMOT 230/E |
| 1 x | Fibre-Cut Discs |
| 1 x | Earth wire |
| 2 x | High quality corundum grinding bits |
| 1 x | Independent four jaw chuck for the DB 250 |
| 1 x | CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C |
| 1 x | Steel brushes |
| 1 x | Long neck angle milling/drilling unit LWB 220/E |
| 1 x | MICRO Miller FF 230 |
| 1 x | Telephone pliers bent 165mm |
| 1 x | Screwdriver 1.0 |
| 1 x | IC Test clip 20 pins |
| 1 x | DIL34/SSOP34 ZIF 200 mil |
| 1 x | Broca de alta duração de 3.0mm |
| 1 x | Broca de alta duração de 2.3mm |
| 1 x | DIL40/PLCC52 ZIF AWM-1 |
| 1 x | DIL32/SDIP32 ZIF 400mil |
 |
| €58,024.98 |
