2 x | |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Five piece HSS chisel set |
1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
2 x | surface planing and thicknessing ADH 200 |
1 x | Delta sander OZI/E |
1 x | Footswitch FS |
3 x | surface planing and thicknessing ADH 250 |
1 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
1 x | MICROMOT steel collet set |
1 x | Angle polisher WP/E |
1 x | Sanding fleece for LWS |
2 x | Pensander PS 13 |
1 x | Lathe System PD 400 |
1 x | MICRO Band Saw MBS 240/E |
1 x | Flat nose pliers 160mm |
2 x | Dividing attachment TA 230 for PF 250 |
1 x | Broca de alta duração de 0.5mm |
1 x | FLUX-OFF 400ml |
1 x | Blade for Wood and Plastics |
1 x | Screwdriver bit set. 49-piece. |
1 x | Super safety and specialty bit set, 75-piece |
1 x | End side cutters EUROline-Conductive |
1 x | Flexishaft MICROMOT 110/BF |
2 x | Felt cloth polishing disc (100 x 15mm) |
1 x | Super-fine sanding discs grain 2000 |
1 x | sanding belts for BBS/s Grit 80 |
1 x | Safety Insulated Pozidriv Screwdriver 14-642VDE |
2 x | Chuck for TBM 220 |
1 x | Protective device for hand-operated MICROMOT |
1 x | Safety insulated screwdrivers 14-608 VDE |
1 x | Backing disc for LWS |
1 x | sclcr2525M12 |
1 x | Lambswool polishing disc |
1 x | Round nose pliers 45º EUROline-Conductive |
1 x | MICROMOT 50/E |
1 x | Scroll saw DS 230/E |
1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
1 x | Combination pliers 205mm |
1 x | Mini side cutters EUROline-Conductive |
3 x | Wood Lathe DB450 |
1 x | Earth wire |
1 x | MICROMOT 50/EF |
1 x | Telephon pliers bent 160mm |
1 x | Disc Sander TG 125/E |
1 x | Corundum grinding disc for LWS |
3 x | Insulation Resistance Tester MG125 |
1 x | Super-fine sanding discs grain 000 |
1 x | MICRO woodturning lathe DB 250 |
1 x | ACCENT SERVICE TOOLS SET |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | 6pcs Double Open End wrench set |
2 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
1 x | Flat nose pliers 45º EUROline-Conductive |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | 6-piece screwdriver and cross-recess set ESD |
1 x | Broca de alta duração de 1.0mm |
1 x | Mill/Drill Unit BFB 2000. |
1 x | Broca de alta duração de 0.8mm |
1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
1 x | Blade guides separately |
1 x | Coarse-toothed (25 TPI per 25mm) |
1 x | Four Jaw Chuck |
1 x | Broca de alta duração de 1.3mm |
1 x | Earth wire with dummy Schunko-plug |
1 x | MICROMOT drill stand MB 200 |
1 x | magnetic base 80kg |
1 x | MICROFLAM gas soldering set MGS |
1 x | Broca de alta duração de 2.1mm |
1 x | Flap Wheels |
1 x | Broca de alta duração de 1.4mm |
1 x | Diamond-coated cutting disc for MIC |
1 x | 14-piece parallel supports set |
1 x | Three jaw chuck for the lathe DB 250 |
1 x | Corundum fan sander for LWS |
1 x | Tool holder for rotary tools |
1 x | Super-fine sanding discs grain 400 |
1 x | Telephon pliers straight 160mm |
1 x | Universal and oil siphoning pump AP 12 |
1 x | Compact workshop vacuum cleaner CW-matic |
1 x | Earth wire |
1 x | PRECISION WIRE STRIPPER ESD-PLUS |
2 x | PLCC Puller |
1 x | Safety insulated screwdrivers 14-602 VDE |
1 x | TU 2404 |
1 x | Band knife of hardened spring band steel (without teeth) |
1 x | Router base OFV |
1 x | MICRO Miller FF 500 |
1 x | Contact bracelet with spiral cord |
1 x | Complete Engraving Kit with trial glass |
1 x | 6-piece screwdriver set ESD |
1 x | Telephon pliers straight 200mm |
1 x | Bandsaw blade of bimetal for MBS 240/E |
3 x | Table Sawr TKS 315 E |
1 x | Three piece thread cutting set |
1 x | BeeHive204 |
1 x | EUROline snipe nose pliers |
1 x | TU 1503V |
1 x | Telephon pliers bent 200mm |
1 x | Engraving tool GG |
1 x | Microfibre cloth |
1 x | Step clamps made of steel |
1 x | FLUX DISPENSING PEN, LEAD FREE |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Replacement belts for BSL 220/E |
1 x | EUROline mini side cutter |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Blade holders for DS 460 |
1 x | Belt sander BBS/S |
1 x | EUROline flat nose pliers |
1 x | Centre Turning Attachment |
1 x | Grinding mop cylinder grit 120 |
1 x | Wire strippers 160mm |
2 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Broca de alta duração de 2.0mm |
1 x | End side cutters 45º EUROline-Conductive |
1 x | Table Saw TKS 2500 SC |
1 x | Universal holder UHZ |
1 x | MICROFLAME burner MFB/E |
1 x | MICRO Heat gun MH 550 |
1 x | Broca de alta duração de 2.3mm |
1 x | EUROline side cutter pointed head |
1 x | Mill/Drill System BFW 40/E |
1 x | Floor cover ESD |
1 x | Safety Insulated Pozidriv Screwdriver 14-641VDE |
1 x | Insert CCGT120404-AK |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | broca de alta duração de 0,2mm |
1 x | Thicknesser DH 40 |
1 x | Precision drill grinder FBS 12/EF |
1 x | SCLCR1010E06 |
1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | Safety Insulated Pozidriv Screwdriver 14-644VDE |
1 x | Broca de alta duração de 0.7mm |
1 x | sanding belts for BBS/s Grit 150 |
1 x | IC tweezers |
1 x | Round nose pliers 160mm |
1 x | Radius Cutting Attachment, complete with pointed tool |
1 x | Safety insulated screwdrivers 14-606 VDE |
1 x | Bench drill machine TBM 220 |
1 x | Grinding mop cylinder grit 120 |
1 x | Handy 1515 |
1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
1 x | Vacum SAA 901 |
1 x | MICROMOT tool holder |
1 x | Mini side cutters EUROline-Conductive |
1 x | Belt sander BS/E |
1 x | Universal polishing paste |
1 x | MICROMOT 230/E |
1 x | Broca de alta duração de 0.3mm |
1 x | Coarse-toothed (18 TPI per 25mm) |
1 x | Wood Lathe DB900 |
1 x | Drill chuck with sliding sleeve for the tailstock |
1 x | Safety insulated screwdrivers 14-604 VDE |
1 x | Fine dust paper filter for CW-matic |
1 x | MICROMOT 50 |
1 x | Gear Chuck |
1 x | broca de alta duração de 0,6mm |
1 x | MICRO cutter MIC |
1 x | Corundum sanding discs for LWS |
1 x | Cylinder sander WAS/E |
1 x | Broca de alta duração de 1.2mm |
1 x | MICRO Miller MF 70 |
1 x | Micro Compound Table KT 70 |
1 x | MICRO-screwdrivers |
1 x | Aluminium Die-Cast |
![](images/pixel_black.gif) |
€25,468.37 |