| 4 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 4 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | FLUX DISPENSING PEN, LEAD FREE |
| 3 x | Wolfram vanadium steel milling bits |
| 2 x | Ball shaped milling cutters |
| 2 x | Cylinder shaped milling cutters |
| 2 x | Solid carbide saw blade |
| 4 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
| 2 x | Saw blade made of high-alloy special steel |
| 2 x | Tungsten carbide cutter 2.0mm |
| 2 x | Tungsten carbide cutter 3.0mm |
| 2 x | Wolfram vanadium steel milling bits |
| 2 x | Cylindrical cutters |
| 5 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 3 x | Set of special steel cutters |
| 5 x | Tungsten Carbide Tipped (TCT) |
| 2 x | Disc cutters |
| 2 x | Flame shaped milling cutters |
| 2 x | Solid carbide stylus for engraving |
| 2 x | Set of precision cutters |
| 10 x | Micro Compound Table KT 70 |
| 2 x | Flexible silicon discs |
| 6 x | HSS twist drill set with centring pin |
| 2 x | Diamond-coated cutting disc for MIC |
| 1 x | MICROMOT 50/E |
| 5 x | Rebating cutter 6.4mm |
| 2 x | Polishing machine PM 100 |
| 3 x | Edge cutter with pin 6.4mm |
| 2 x | Super-fine sanding discs grain 000 |
| 4 x | MICROMOT extension cord. 300cm. |
| 5 x | Footswitch FS |
| 2 x | High quality corundum grinding bits |
| 2 x | Cylinder sander WAS/E |
| 3 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 4 x | Tungsten carbide drills Ø1,5mm |
| 4 x | Dividing attachment TA 230 for PF 250 |
| 4 x | Tungsten carbide drills Ø2mm |
| 4 x | MICROMOT tool holder |
| 2 x | Disc Sander TG 250/E |
| 2 x | Belt sander BS/E |
| 3 x | Half round cutter 13mm |
| 2 x | Angle polisher WP/E |
| 2 x | Replacement glue sticks for HKP 220 |
| 4 x | MICROMOT steel collet set |
| 4 x | Protective device for hand-operated MICROMOT |
| 4 x | Conjunto de três brocas de ponto |
| 1 x | Crosscut 'Super-Cut' blade |
| 1 x | High quality corundum grinding bits |
| 2 x | High quality corundum grinding bits |
| 5 x | Chuck for TBM 220 |
| 2 x | High quality corundum grinding bits |
| 3 x | Lambswool polishing disc |
| 1 x | High quality corundum grinding bits |
| 2 x | Professional polishing sponge |
| 3 x | Core box bit 3.2mm |
| 4 x | Tungsten carbide drills Ø1mm |
| 3 x | Inspector mirror |
| 4 x | Professional set for finish grinding and polishing |
| 6 x | HSS drill bits 1.2mm |
| 2 x | Milling cutter set (2 - 5mm) |
| 2 x | Belt sander BBS/S |
| 2 x | Rounding over cutter 6.4mm |
| 4 x | Flexishaft MICROMOT 110/P |
| 4 x | Backing disc for LWS |
| 2 x | Independent four jaw chuck for the DB 250 |
| 3 x | Inpection mirror 1-978 |
| 4 x | Mill/Drill Unit BFB 2000. |
| 4 x | HSS drill bits 0.5mm |
| 2 x | High quality corundum grinding bits |
| 2 x | Self-adhesive silicone film for easy sanding disc replacement |
| 4 x | Flexishaft MICROMOT 110/BF |
| 1 x | Beeprog2C |
| 4 x | 14-piece parallel supports set |
| 4 x | Aluminium Die-Cast |
| 5 x | HSS drill bits 1.6mm |
| 2 x | High quality corundum grinding bits |
| 2 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 3 x | HSS drill bits 1.0mm |
| 1 x | Diamond blade |
| 2 x | Milling cutter set (6 - 10mm) |
| 1 x | High quality corundum grinding bits |
| 1 x | BeeProg2 |
| 3 x | Long neck angle grinder LHW |
| 1 x | Pensander PS 13 |
| 2 x | Tungsten tipped saw blade |
| 1 x | Three jaw chuck for the lathe DB 250 |
| 1 x | Super safety and specialty bit set, 75-piece |
| 3 x | Super-fine sanding discs grain 2000 |
| 2 x | V-slot cutter 6.5mm |
| 2 x | Slot cutter 6.5mm |
| 1 x | Tungsten carbide cutters set |
| 1 x | Insulation Resistance Tester MG125 |
| 3 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 3 x | Super-fine sanding discs grain 400 |
| 2 x | Delta sander OZI/E |
| 4 x | HSS drill bits 0.8mm |
| 1 x | SmartProg2 |
| 2 x | Drill chuck with sliding sleeve for the tailstock |
| 1 x | Screwdriver bit set. 49-piece. |
| 2 x | Five piece HSS chisel set |
| 3 x | Warding files set, 6pcs |
| 3 x | Combi cutter 6.5/2.5mm |
| 1 x | Cone shaped milling cutter |
| 1 x | IC Test clip 20 pins |
| 2 x | Angle cutter 45 ° |
| 1 x | Blade for Wood and Plastics |
| 4 x | Polishing Set |
| 1 x | Broca de alta duração de 0.3mm |
| 1 x | Hot wire cutter THERMOCUT 12/E |
| 1 x | Diamond Twist Drills |
| 1 x | Broca de alta duração de 2.0mm |
| 1 x | Broca de alta duração de 1.3mm |
| 2 x | Multipurpose Vices Primus 75 |
| 1 x | PLCC Puller |
| 1 x | Broca de alta duração de 0.8mm |
| 1 x | Broca de alta duração de 1.4mm |
| 2 x | Precision steel vice PM 40 |
| 1 x | Broca de alta duração de 1.5mm |
| 1 x | Radius Cutting Attachment, complete with pointed tool |
| 1 x | broca de alta duração de 0,2mm |
| 2 x | Felt cloth polishing disc (100 x 15mm) |
| 1 x | Gear Chuck |
| 4 x | Super-Cut |
| 4 x | Special Fused Alumina (Hardness N). |
| 2 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
| 1 x | Fixed Steady |
| 1 x | ACCENT SERVICE TOOLS SET |
| 1 x | IC tweezers |
| 4 x | Silicon-Carbide. |
| 1 x | 6-piece screwdriver and cross-recess set |
| 1 x | Broca de alta duração de 1.0mm |
| 1 x | Flexible polishing pad set |
| 2 x | Machine Vice MS 4 |
| 1 x | Cotton polishers |
| 1 x | Hot wire cutter THERMOCUT 230/E |
| 1 x | Flexible polishing pad set |
| 1 x | Broca de alta duração de 0.5mm |
| 2 x | Precision Vice FMZ |
| 1 x | Broca de alta duração de 2.3mm |
| 1 x | Broca de alta duração de 2.5mm |
| 1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
| 1 x | Diamond Grinding Bits 1,8mm |
| 1 x | Broca de alta duração de 0.9mm |
| 1 x | 6-piece screwdriver and cross-recess set |
| 1 x | Handy 1515 |
| 1 x | Band knife of hardened spring band steel (without teeth) |
| 2 x | Fine dust paper filter for CW-matic |
| 1 x | Bandsaw blade of bimetal for MBS 240/E |
| 2 x | Universal polishing paste |
| 1 x | Flexible silicon discs |
| 1 x | Felt polishers |
| 1 x | Cotton polishers |
| 1 x | Diamond Grinding Bits 5mm |
| 4 x | Diamond Coated |
| 1 x | Blade guides separately |
| 1 x | Flexible silicon discs |
| 1 x | Multiform grindstone |
| 1 x | Broca de alta duração de 2.1mm |
| 1 x | Microfibre polishing wheel, 15-ply (100mm) |
| 1 x | Broca de alta duração de 1.1mm |
| 1 x | Felt polishers |
| 1 x | Polishing paste |
| 1 x | Diamond Grinding Bits 1,8mm |
| 1 x | Ball-shaped diamond coated 3.2mm |
| 1 x | Broca de alta duração de 2.4mm |
| 1 x | Diamond Cutting Discs |
| 1 x | Felt polishers |
| 1 x | Diamond Cutting Discs |
| 1 x | Diamond Cutting Discs |
| 1 x | Broca de alta duração de 0.4mm |
| 1 x | Tool holder for rotary tools |
| 1 x | Collet Set for accurate use on round components |
| 1 x | 6-piece TORX-screwdriver-set |
| 2 x | Precision Vice FMS 75 |
| 1 x | Diamond blade for MBS 240/E |
| 1 x | Diamond Cutting Discs |
| 1 x | Ball-shaped diamond coated 1.2mm |
| 1 x | Blade for Steel and brass |
| 1 x | Felt polishers |
| 1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
| 1 x | Replacement carving blades for MSG |
| 1 x | 6-piece screwdriver and cross-recess set |
| 1 x | Broca de alta duração de 0.7mm |
| 2 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 1 x | broca de alta duração de 0,6mm |
| 1 x | |
| 1 x | Fluted filter for CW-matic |
| 1 x | Centre Turning Attachment |
| 2 x | Multipurpose Vices Primus100 |
| 1 x | Broca de alta duração de 2.2mm |
| 1 x | MICRO Band Saw MBS 240/E |
| 1 x | Diamond-coated cutting and roughing disc |
| 3 x | HSS twist drill set to DIN 338 |
| 1 x | MICRO shaper MP 400 |
| 1 x | Sanding fleece for LWS |
| 1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 1 x | Corundum fan sander for LWS |
| 1 x | EUROline snipe nose pliers |
| 1 x | EUROline side cutter pointed head |
| 1 x | Corundum grinding disc for LWS |
| 2 x | 10-piece wood router cutter set |
| 1 x | MICRO woodturning lathe DB 250 |
| 2 x | Tungstein carbide rasp - and cutting disc |
| 1 x | Precision lathe PD 250/E |
| 1 x | Stainless steel cups |
| 1 x | HSS boring tool set, 6 pieces |
| 1 x | EUROline set of pliers |
| 1 x | EUROline mini side cutter |
| 1 x | Three piece thread cutting set |
| 1 x | Steel cups |
| 1 x | Stainless steel brushes |
| 1 x | Surface planer AH 80 |
| 1 x | Cut off/mitre saw KGS 80 |
| 1 x | EUROline mini side cutter |
| 1 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
| 1 x | Steel brushes |
| 2 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
| 1 x | Table Saw FET |
| 1 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 1 x | EUROline mini side cutter |
| 2 x | Slot cutter 5.0mm |
| 1 x | Corundum grinding disc for LWS |
| 1 x | EUROline end cutter |
| 1 x | 2-speed scroll saw DSH |
| 1 x | Spare cutting wire |
| 1 x | EUROline flat nose pliers |
| 1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 1 x | Corundum bound cutting disc for LWS |
| 1 x | Cups brushes |
| 1 x | Super jig saw STS/E |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Steel wheels |
| 1 x | Corundum fan sander for LWS |
| 1 x | EUROline side cutter rounded head |
| 1 x | EUROline top cutter |
| 1 x | EUROline mini side cutter |
| 1 x | Stainless steel wheels |
| 1 x | Jig saw STS 12/E |
| 1 x | Thicknesser DH 40 |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Scroll saw DS 230/E |
| 1 x | EUROline round nose pliers |
| 1 x | MICRO cutter MIC |
| 1 x | Corundum sanding discs for LWS |
| 1 x | Motor-driven carving device MSG |
| 2 x | Lathe System PD 400 |
| 1 x | Sanding fleece for LWS |
| 1 x | Slot cutter 3.2mm |
| 1 x | Corundum sanding discs for LWS |
| 2 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 1 x | VIDEOCLEAN 200ml |
| 1 x | Tungsten carbide cutter 1.0mm |
| 1 x | OPTI BF20 VARIO |
| 1 x | Grinding mop cylinder grit 240 |
| 1 x | DEGRESER 200ml |
| 1 x | TUNER 200ml |
| 1 x | Polishing felt, medium hard |
| 1 x | Glass fibre contact cleaner brush |
| 1 x | Safety Insulated Pozidriv Screwdriver 14-643VDE |
 |
| €23,770.64 |
