2 x | V-slot cutter 6.5mm |
2 x | Rounding over cutter 6.4mm |
1 x | TUNER 200ml |
1 x | Fine dust paper filter for CW-matic |
1 x | Spiral blade. 125mm long with plain ends (without pins). |
1 x | Footswitch FS |
1 x | VIDEOCLEAN 200ml |
1 x | Mill/Drill System BFW 40/E |
1 x | ESD Brushe |
1 x | surface planing and thicknessing ADH 200 |
2 x | Disc Sander TG 125/E |
3 x | MICROMOT 50/EF |
2 x | Bench drill press TBH |
1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | Aluminium Die-Cast |
1 x | Bench drill machine TBM 220 |
2 x | MICRO Miller FF 500 |
2 x | Long neck angle grinder LHW |
1 x | Coarse-toothed (25 TPI per 25mm) |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
2 x | Angle polisher WP/E |
3 x | Precision drill grinder FBS 12/EF |
1 x | Gear Chuck |
1 x | Flexishaft MICROMOT 110/P |
1 x | Super-Cut |
3 x | MICRO Miller FF 230 |
2 x | Delta sander OZI/E |
2 x | Belt sander BS/E |
1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | Broca de alta duração de 1.3mm |
1 x | Earth wire |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Disc Sander TG 250/E |
1 x | Fixed Steady |
1 x | Broca de alta duração de 0.5mm |
1 x | Three-jaw steel drill chuck |
1 x | MICROMOT steel collet set |
2 x | Slot cutter 6.5mm |
1 x | Broca de ponto 3.15 x 1.25 |
1 x | FLUX-OFF 400ml |
1 x | Centre Turning Attachment |
1 x | Hot wire cutter THERMOCUT 12/E |
1 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
2 x | Core box bit 3.2mm |
1 x | Glass fibre contact cleaner brush |
1 x | ESD-handling ser 9-361 |
1 x | Broca de ponto 5.00 x 2.00 |
1 x | broca de alta duração de 0,2mm |
1 x | Broca de alta duração de 0.8mm |
1 x | SmartProg2 |
1 x | Collet Set for accurate use on round components |
3 x | Pensander PS 13 |
1 x | MICROMOT 50/E |
1 x | ESD Brushe |
1 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
1 x | Brass contact cleaner brush |
2 x | Grinding and Polishing Machine SP/E |
1 x | FLUX DISPENSING PEN, LEAD FREE |
1 x | Protective device for hand-operated MICROMOT |
1 x | Earthing module |
1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | Edge cutter with pin 6.4mm |
1 x | Broca de alta duração de 0.3mm |
1 x | Earth wire with dummy Schunko-plug |
1 x | Broca de ponto 8.00 x 3.15 |
1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
1 x | Radius Cutting Attachment, complete with pointed tool |
4 x | Belt sander BBS/S |
1 x | Micro Compound Table KT 70 |
1 x | Four Jaw Chuck |
2 x | Cylinder sander WAS/E |
1 x | MICROMOT drill stand MB 200 |
1 x | BeeProg2 |
1 x | Fluted filter for CW-matic |
1 x | Milling cutter set (6 - 10mm) |
1 x | Diamond Coated |
1 x | PRECISION WIRE STRIPPER ESD-PLUS |
1 x | SPRAYOIL 200ml |
1 x | Slot cutter 3.2mm |
1 x | Wheels brushes |
1 x | TIP SPT-6 |
1 x | Slot cutter 5.0mm |
2 x | Three piece thread cutting set |
1 x | ANTISTATIC 200ml |
1 x | High quality corundum grinding bits |
1 x | Hot wire cutter THERMOCUT 650 |
1 x | Universal polishing paste |
1 x | MICROMOT Mains Adapter NG 2/S |
1 x | Stainless steel cups |
1 x | Ball-shaped diamond coated 1.2mm |
1 x | EUROline side cutter pointed head |
1 x | Replacement carving blades for MSG |
1 x | Table Saw TKS 2500 SC |
3 x | CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C |
1 x | EUROline mini side cutter |
2 x | Hot wire cutter THERMOCUT 230/E |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Wolfram vanadium steel milling bits |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
2 x | Lathe System PD 400 |
1 x | TIP SPT-2 |
1 x | Chuck for TBM 220 |
1 x | Cylindrical cutters |
2 x | Diamond Cutting Discs |
1 x | Set of precision cutters |
1 x | High quality corundum grinding bits |
1 x | HSS drill bits 1.6mm |
1 x | Disc cutters |
1 x | High quality corundum grinding bits |
1 x | Diamond Cutting Discs |
1 x | Diamond Twist Drills |
1 x | Flame shaped milling cutters |
1 x | 10-piece wood router cutter set |
1 x | Tungsten Carbide Tipped (TCT) |
1 x | Angle cutter 45 ° |
1 x | Cups brushes |
1 x | TOP-PIN 200ml |
1 x | Tungsten carbide drills Ø2mm |
1 x | MULTI 200ml |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
2 x | Cutting disc, with reinforcement |
1 x | Half round cutter 13mm |
1 x | FREEZER-BR 200ml |
1 x | Supercut jig saw blades of special steel |
2 x | Diamond Cutting Discs |
1 x | EUROline snipe nose pliers |
1 x | Inspector mirror |
1 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | MICROMOT Mains Adapter NG 2/E |
1 x | BIT-SET |
1 x | HSS twist drill set to DIN 338 |
1 x | Tungsten carbide drills Ø1mm |
2 x | Professional polishing sponge |
1 x | TIP SPT-10 |
1 x | Multiform grindstone |
1 x | EUROline round nose pliers |
1 x | Cylinder shaped milling cutters |
1 x | TIP SPT-9 |
1 x | Stainless steel wheels |
1 x | Diamond Grinding Bits 5mm |
1 x | EUROline top cutter |
1 x | Inpection mirror 1-978 |
1 x | Lambswool polishing disc |
1 x | High quality corundum grinding bits |
1 x | Flap Wheels |
1 x | Sanding bands 14x13mm |
1 x | Bench Circular Saw KS 230 |
1 x | Hand magnifier with LED light 3X |
1 x | Flap Wheels |
1 x | Replacement belts for BSL 220/E |
1 x | Corundum sanding discs for LWS |
1 x | Fibre-Cut Discs |
1 x | 2-speed scroll saw DSH |
1 x | MICRO Miller MF 70 |
1 x | Corundum grinding disc for LWS |
1 x | magnifier 3.25 x Ø 45mm with additional lens |
1 x | MICROFLAM gas soldering set MGS |
1 x | MICRO Band Saw MBS 240/E |
2 x | Corundum fan sander for LWS |
1 x | Cutter head for copy and surface milling MT3 |
2 x | sanding belts for BBS/s Grit 150 |
1 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
1 x | Sanding Drums |
1 x | 6-piece wrench key set ESD |
1 x | Diamond Cutting Discs |
1 x | Crimping plier for BNC |
2 x | Tungstein carbide rasp - and cutting disc |
1 x | HSS cutting blade for OZI |
1 x | Super-fine sanding discs grain 400 |
1 x | Fibre-Cut Discs |
1 x | Precision Vice FMZ |
1 x | Fibre-Cut Discs |
2 x | Super-fine sanding discs grain 000 |
1 x | Multipurpose Vices Primus 75 |
1 x | Jig saw STS 12/E |
1 x | Grinding mop cylinder grit 120 |
1 x | MICRO cutter MIC |
1 x | 6-piece socket wrenches ESD |
1 x | Corundum bound cutting disc for LWS |
1 x | MICROMOT 50 |
1 x | Precision Drill/Grinder FBS 240/E |
1 x | Tungsten carbide cutters set |
2 x | Grinding mop cylinder grit 80 |
2 x | Diamond-coated cutting and roughing disc |
1 x | Five piece HSS chisel set |
1 x | Independent four jaw chuck for the DB 250 |
1 x | 6-piece screwdriver and cross-recess set |
1 x | HSS immersion saw blades for OZI |
1 x | 6-piece screwdriver and cross-recess set |
1 x | Sanding fleece for LWS |
1 x | MICRO woodturning lathe DB 250 |
1 x | PLCC Extractor |
1 x | Lathe tools 10mm pastilhados |
1 x | Fibre-Cut Discs |
1 x | Nylon Fleece Brushes |
1 x | 6-piece screwdriver set ESD |
1 x | Sanding Drums |
1 x | Screwdriver bit set. 49-piece. |
1 x | Long neck straight drill/grinder LB/E |
1 x | Precision steel vice PM 40 |
1 x | Professional Drill/Grinder IBS/E |
1 x | Conj 5 pinças ESD |
1 x | Table Saw FET |
1 x | 6-piece screwdriver and cross-recess set ESD |
1 x | Super safety and specialty bit set, 75-piece |
1 x | 6-piece TORX-screwdriver-set |
1 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
1 x | DIL48/TSOP56 ZIF 18.4mm NOR-4 |
2 x | CRIMPING PLIERS/WIRE STRIPPER |
1 x | Corundum sanding discs for LWS |
1 x | Sanding Drums |
1 x | Machine Vice MS 4 |
|
€23,670.36 |