1 x | Fixed Steady |
2 x | Radius Cutting Attachment, complete with pointed tool |
2 x | Gear Chuck |
2 x | Sanding pads for OZI 220/E grit 150 |
1 x | Four Jaw Chuck |
1 x | Tool holder for rotary tools |
2 x | Saw blade made of high-alloy special steel |
2 x | Crosscut 'Super-Cut' blade |
1 x | Cross-recess Screwdrivers 1 |
1 x | Drill chuck with sliding sleeve for the tailstock |
1 x | ACCENT SERVICE TOOLS SET |
1 x | Cross-recess Screwdrivers 2 |
1 x | ESD Tweezers 5-193 |
1 x | Three jaw chuck for the lathe DB 250 |
2 x | Five piece HSS chisel set |
1 x | POLISHER 200ml |
1 x | Tungsten tipped saw blade |
1 x | HSS immersion saw blades for OZI |
1 x | Fine dust paper filter for CW-matic |
1 x | Cross-recess Screwdrivers 00 |
1 x | Independent four jaw chuck for the DB 250 |
2 x | Silicon-Carbide. |
2 x | FLUX DISPENSING PEN, LEAD FREE |
2 x | HSS cutting blade for OZI |
2 x | Tungsten Carbide Tipped (TCT) |
2 x | Diamond blade |
1 x | CRIMPING PLIERS/WIRE STRIPPER |
1 x | ESD Tweezers 5-191 |
1 x | ESD Tweezers 5-192 |
1 x | Cross-recess Screwdrivers 2 |
2 x | Polishing Set |
1 x | ESD Brushe |
1 x | Solid carbide saw blade |
1 x | Cross-recess Screwdrivers 000 |
1 x | Broca de alta duração de 3.0mm |
1 x | HSS immersion saw blades for OZI |
1 x | Router base OFV |
1 x | Aluminium Die-Cast |
4 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
1 x | High quality corundum grinding bits |
2 x | Diamond Coated |
3 x | Replacement belts for BSL 220/E |
4 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
3 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
2 x | Micro Compound Table KT 70 |
3 x | MICROMOT steel collet set |
3 x | Replacement belts for BSL 220/E |
2 x | Footswitch FS |
1 x | Three-jaw steel drill chuck |
1 x | Universal and oil siphoning pump AP 12 |
1 x | HSS boring tool set, 6 pieces |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
1 x | sandpaper for PS 13 Grit 240 |
1 x | Fibre-Cut Discs |
2 x | Spare cutting wire |
1 x | sandpaper for PS 13 Grot 180 |
1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
1 x | Step clamps made of steel |
2 x | MICROMOT tool holder |
1 x | Fibre-Cut Discs |
1 x | MICRO Miller MF 70 |
3 x | MICROMOT drill stand MB 200 |
2 x | Flexishaft MICROMOT 110/BF |
1 x | Screwdriver 0.8 |
5 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | MICROMOT extension cord. 300cm. |
1 x | High quality corundum grinding bits |
1 x | Dividing attachment TA 230 for PF 250 |
1 x | PRECISION WIRE STRIPPER ESD-PLUS |
1 x | Centre Turning Attachment |
1 x | |
1 x | Milling cutter set (2 - 5mm) |
2 x | Replacement belts for BSL 220/E |
1 x | Screwdriver 2.5 |
1 x | Flexible polishing pad set |
2 x | Replacement belts for BSL 220/E |
1 x | Engraving tool GG |
1 x | High quality corundum grinding bits |
1 x | Broca de alta duração de 1.3mm |
1 x | sandpaper for PS 13 Grit 400 |
1 x | Screwdriver 4.0 |
2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | Replacement carving blades for MSG |
1 x | Fibre-Cut Discs |
2 x | Tungstein carbide rasp - and cutting disc |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Coarse-toothed (25 TPI per 25mm) |
1 x | Cylinder shaped milling cutters |
1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
1 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
1 x | Band knife of hardened spring band steel (without teeth) |
2 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
1 x | Grinding mop cylinder grit 120 |
1 x | High quality corundum grinding bits |
1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | Bench drill press TBH |
2 x | Spiral blade. 125mm long with plain ends (without pins). |
1 x | Special Fused Alumina (Hardness N). |
2 x | 10-piece wood router cutter set |
1 x | Collet Set for accurate use on round components |
1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
1 x | Sanding Discs |
1 x | Sanding bands 14x13mm |
1 x | Corundum sanding discs for LWS |
1 x | Grinding mop cylinder grit 240 |
1 x | Cut off/mitre saw KGS 80 |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Super-Cut |
1 x | Brass contact cleaner brush |
1 x | Protective device for hand-operated MICROMOT |
1 x | Diamond Cutting Discs |
1 x | Cutting disc, with reinforcement |
1 x | Fibre-Cut Discs |
2 x | Blade holders for DS 460 |
1 x | Blade for Wood and Plastics |
1 x | Flexible silicon discs |
1 x | IC Test clip 20 pins |
1 x | Corundum bound cutting disc for LWS |
1 x | Flexible silicon discs |
3 x | Replacement cutting disc for MICRO cutter MIC |
1 x | Fibre-Cut Discs |
2 x | Bandsaw blade of bimetal for MBS 240/E |
1 x | Corundum sanding discs for LWS |
1 x | Corundum grinding disc for LWS |
1 x | Broca de alta duração de 2.6mm |
1 x | Super-fine sanding discs grain 000 |
1 x | Broca de alta duração de 0.4mm |
2 x | Coarse-toothed (18 TPI per 25mm) |
1 x | Flap Wheels |
2 x | Blade guides separately |
1 x | Sanding Drums |
1 x | Wolfram vanadium steel milling bits |
1 x | MICROMOT glue gun HKP 220 |
1 x | Coarse-toothed (10 TPI per 25mm) |
1 x | Corundum fan sander for LWS |
1 x | Corundum grinding disc for LWS |
1 x | Slot cutter 5.0mm |
1 x | Half round cutter 13mm |
1 x | Rounding over cutter 6.4mm |
1 x | Diamond blade for MBS 240/E |
1 x | Core box bit 3.2mm |
1 x | Grinding mop cylinder grit 80 |
1 x | Diamond-coated cutting disc for MIC |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Angle cutter 45 ° |
1 x | Combi cutter 6.5/2.5mm |
1 x | Blade for Steel and brass |
1 x | Edge cutter with pin 6.4mm |
1 x | Replacement cutting wire for the THERMOCUT 12/E |
1 x | Slot cutter 3.2mm |
![](images/pixel_black.gif) |
€4,716.91 |