1 x | BGA-Bottom-13 |
1 x | IC Test clip 20 pins |
1 x | BGA-Bottom-139 |
1 x | FLUX DISPENSING PEN, LEAD FREE |
2 x | Diamond Cutting Discs |
2 x | Disc Sander TG 250/E |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Bench drill press TBH |
1 x | BGA-Bottom-199 |
1 x | Metal Cutting Blades |
2 x | Tungsten Carbide Tipped (TCT) |
1 x | Safety insulated screwdrivers 14-601 VDE |
2 x | Safety Insulated Pozidriv Screwdriver 14-642VDE |
1 x | BGA-Bottom-201 |
3 x | Safety Insulated Phillips Screwdriver 14-632VDE |
1 x | DIL28/QFP52 ZIF-CS SX52 |
1 x | BGA-Bottom-196 |
2 x | Warding files set, 6pcs |
1 x | MICROMOT 50 |
1 x | BGA-Bottom-18 |
1 x | Super safety and specialty bit set, 75-piece |
1 x | BGA-Bottom-167 |
1 x | Screwdriver bit set. 49-piece. |
1 x | BGA-Bottom-165 |
2 x | Cutting disc, with reinforcement |
1 x | sandpaper for PS 13 Grot 180 |
2 x | Fibre-Cut Discs |
2 x | Cylinder sander WAS/E |
1 x | BGA-Bottom-208 |
1 x | BGA-Bottom-198 |
1 x | Fine dust paper filter for CW-matic |
1 x | Crosscut 'Super-Cut' blade |
1 x | BGA-Bottom-217 |
2 x | Core box bit 3.2mm |
1 x | Conjunto de três brocas de ponto |
2 x | Combi cutter 6.5/2.5mm |
1 x | Polishing felt, medium hard |
1 x | BGA-Bottom-192 |
1 x | BGA-Bottom-16 |
1 x | Diamond Cutting Discs |
1 x | BGA-Bottom-177 |
2 x | Safety Insulated Phillips Screwdriver 14-634VDE |
3 x | Backing disc for LWS |
1 x | DIL48/QFP100 ZIF PLD-3 |
1 x | Diamond Grinding Bits 1,8mm |
1 x | TIP SPT-9 |
1 x | MICROMOT 50/E |
2 x | Super-fine sanding discs grain 2000 |
1 x | BGA-Bottom-202 |
1 x | Angle polisher WP/E |
2 x | Half round cutter 13mm |
1 x | BGA-Bottom-204 |
1 x | Mill/Drill System BFW 40/E |
1 x | Diamond blade for MBS 240/E |
1 x | BGA-Bottom-215 |
2 x | MICROMOT 50/EF |
1 x | Professional polishing sponge |
1 x | TIP SPT-10 |
1 x | BGA-Bottom-191 |
1 x | Slot cutter 6.5mm |
1 x | Polishing machine PM 100 |
1 x | Cotton polishers |
1 x | Corundum sanding discs for LWS |
2 x | Safety Insulated Pozidriv Screwdriver 14-641VDE |
1 x | Cylinder shaped milling cutters |
2 x | MICROMOT 230/E |
1 x | BGA-Bottom-154 |
2 x | Disc Sander TG 125/E |
2 x | Slot cutter 5.0mm |
1 x | Diamond Coated |
2 x | Angle cutter 45 ° |
1 x | BGA-Bottom-153 |
1 x | Super-fine sanding discs grain 400 |
1 x | Fibre-Cut Discs |
2 x | Diamond-coated cutting disc for MIC |
1 x | Diamond Cutting Discs |
2 x | Super-fine sanding discs grain 000 |
2 x | Safety Insulated Phillips Screwdriver 14-631VDE |
2 x | TIP SPT-6 |
1 x | BGA-Bottom-170 |
1 x | V-slot cutter 6.5mm |
1 x | Diamond cutting blade for OZI |
2 x | Corundum grinding disc for LWS |
1 x | Replacement cutting disc for MICRO cutter MIC |
2 x | Safety Insulated Pozidriv Screwdriver 14-643VDE |
1 x | Long neck angle grinder LHW |
2 x | Corundum bound cutting disc for LWS |
2 x | Lambswool polishing disc |
1 x | TIP SPT-4 |
1 x | BGA-Bottom-157 |
1 x | MICRO Miller FF 230 |
1 x | BGA-Bottom-164 |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
2 x | TIP SPT-3 |
1 x | Belt sander BS/E |
1 x | Corundum fan sander for LWS |
1 x | BGA-Bottom-195 |
1 x | BeeProg2 |
2 x | Precision drill grinder FBS 12/EF |
1 x | Diamond Cutting Discs |
1 x | BGA-Bottom-211 |
2 x | MICRO Miller MF 70 |
2 x | Safety Insulated Phillips Screwdriver 14-633VDE |
1 x | BGA-Bottom-207 |
1 x | Diamond Grinding Bits 5mm |
2 x | Safety Insulated Pozidriv Screwdriver 14-644VDE |
1 x | TIP SPT-2 |
1 x | BGA-Bottom-214 |
2 x | Edge cutter with pin 6.4mm |
1 x | BGA-Bottom-166 |
1 x | BGA-Bottom-19 |
1 x | 10-piece wood router cutter set |
1 x | Diamond-coated cutting and roughing disc |
2 x | Long neck straight drill/grinder LB/E |
2 x | Corundum sanding discs for LWS |
1 x | Diamond blade |
2 x | MICRO Miller FF 500 |
1 x | Cylindrical cutters |
1 x | BGA-Bottom-212 |
1 x | BGA-Bottom-171 |
1 x | Pensander PS 13 |
1 x | Corundum grinding disc for LWS |
1 x | Fibre-Cut Discs |
2 x | Rebating cutter 6.4mm |
1 x | Grinding and Polishing Machine SP/E |
2 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
2 x | MICROMOT Mains Adapter NG 2/S |
1 x | PLCC Puller |
1 x | MICRO shaper MP 400 |
1 x | Centre Turning Attachment |
1 x | 14-piece parallel supports set |
1 x | |
2 x | Footswitch FS |
1 x | Coarse-toothed (18 TPI per 25mm) |
1 x | High quality corundum grinding bits |
2 x | Blade holders for DS 460 |
1 x | Long neck angle milling/drilling unit LWB 220/E |
2 x | Blade for Wood and Plastics |
3 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | High quality corundum grinding bits |
1 x | Polishing Set |
2 x | Spare cutting wire |
1 x | Band knife of hardened spring band steel (without teeth) |
1 x | High quality corundum grinding bits |
1 x | Professional set for finish grinding and polishing |
1 x | Cut off/mitre saw KGS 80 |
1 x | sanding belts for BBS/s Grit 80 |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
2 x | MICRO Band Saw MBS 240/E |
3 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
1 x | Radius Cutting Attachment, complete with pointed tool |
3 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
1 x | Flexishaft MICROMOT 110/P |
1 x | Lathe System PD 400 |
2 x | Table Saw FET |
1 x | Professional Drill/Grinder IBS/E |
1 x | Sanding pads for OZI 220/E grit 240 |
4 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
2 x | High quality corundum grinding bits |
2 x | Coarse-toothed (25 TPI per 25mm) |
1 x | Chuck for TBM 220 |
1 x | Three-jaw steel drill chuck |
1 x | Blade guides separately |
2 x | Grinding mop cylinder grit 80 |
1 x | Hot wire cutter THERMOCUT 230/E |
1 x | Protective device for hand-operated MICROMOT |
1 x | Universal and oil siphoning pump AP 12 |
1 x | Rounding over cutter 6.4mm |
1 x | High quality corundum grinding bits |
1 x | 2-speed scroll saw DSH |
1 x | Grinding mop cylinder grit 120 |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
2 x | PLCC Extractor |
1 x | Silicon-Carbide. |
1 x | Flexishaft MICROMOT 110/BF |
1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
1 x | DIL40/TQFP80-1 ZIF PIC-1A |
1 x | Compact workshop vacuum cleaner CW-matic |
2 x | MICRO woodturning lathe DB 250 |
1 x | Self-adhesive silicone film for easy sanding disc replacement |
1 x | Microfibre cloth |
1 x | Micro Compound Table KT 70 |
1 x | Multiform grindstone |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Replacement belts for BSL 220/E |
4 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
1 x | Hot wire cutter THERMOCUT 650 |
2 x | Brass brushes |
2 x | IC tweezers |
1 x | Cups brushes |
1 x | HSS immersion saw blades for OZI |
1 x | High quality corundum grinding bits |
1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
1 x | Sanding pads for OZI 220/E grit 150 |
1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
1 x | Complete Engraving Kit with trial glass |
2 x | Grinding mop cylinder grit 120 |
2 x | High quality corundum grinding bits |
1 x | Replacement belts for BSL 220/E |
2 x | Steel brushes |
1 x | Felt polishers |
1 x | Motor-driven carving device MSG |
1 x | MICRO cutter MIC |
1 x | Four Jaw Chuck |
1 x | Bench Circular Saw KS 230 |
1 x | Universal polishing paste |
1 x | Bench drill machine TBM 220 |
1 x | Tool holder for rotary tools |
1 x | HSS immersion saw blades for OZI |
1 x | sanding belts for BBS/s Grit 240 |
1 x | Mill/Drill Unit BFB 2000. |
1 x | Replacement glue sticks for HKP 220 |
1 x | Cone shaped milling cutter |
1 x | Sanding fleece for LWS |
1 x | Fixed Steady |
1 x | Scroll saw DS 230/E |
1 x | MICROMOT steel collet set |
1 x | Surface planer AH 80 |
1 x | Special Fused Alumina (Hardness N). |
1 x | Precision lathe PD 250/E |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | sanding belts for BBS/s Grit 150 |
1 x | Thicknesser DH 40 |
1 x | Sanding fleece for LWS |
1 x | Sanding pads for OZI 220/E grit 80 |
1 x | Wheels brushes |
|
€22,437.39 |