| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-3 |
| 2 x | Boring Bar for CCMT |
| 1 x | Telephone pliers bent 165mm |
| 1 x | Sanding pads for OZI 220/E grit 150 |
| 2 x | BGA-Bottom-103 |
| 2 x | Boring Bar for DCMT 10mm |
| 1 x | EUROline flat nose pliers |
| 2 x | BGA-0245/0241 |
| 2 x | Round nose pliers 185mm |
| 1 x | SCLCR1010E06 |
| 1 x | Beeprog2C |
| 3 x | Combination pliers 170mm |
| 1 x | DIL8W/SOIC8 ZIF 200mil |
| 1 x | BGA-Bottom-229 |
| 1 x | BGA-Top-3 ZIF-CS |
| 3 x | Polishing Set |
| 3 x | Spiral blade. 125mm long with plain ends (without pins). |
| 1 x | Wire strippers 160mm |
| 2 x | DIL8/QFN8-1 ZIF-CS |
| 1 x | Special Fused Alumina (Hardness N). |
| 1 x | Parting tool 10mm |
| 1 x | DIL44/QFN44-2 ZIF-CS |
| 2 x | Coarse-toothed (25 TPI per 25mm) |
| 1 x | Side cutters 160mm |
| 1 x | BGA-Bottom-8 |
| 3 x | Flat nose pliers 185mm |
| 1 x | Telephone pliers stright 165mm |
| 1 x | HSS immersion saw blades for OZI |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-6 |
| 2 x | Combination pliers 185mm |
| 2 x | Broca de ponto 3.15 x 1.00 |
| 1 x | DIL48/TSOP48 ZIF 15.4mm |
| 2 x | Coarse-toothed (10 TPI per 25mm) |
| 2 x | Telephone pliers bent 205mm |
| 1 x | DIL8/SOT23-6 ZIF-CS PIC |
| 2 x | Side cutters 170mm |
| 1 x | DIL8W/SOIC8 ZIF 150mil |
| 2 x | Coarse-toothed (18 TPI per 25mm) |
| 1 x | DIL28/QFN28-2 ZIF-CS |
| 1 x | Multiform grindstone |
| 2 x | BGA-Bottom-108 |
| 2 x | BGA-Bottom-218 |
| 2 x | BGA-Bottom-1 |
| 1 x | lathe tools 8mm |
| 1 x | Bottom PSOP44 NOR-3 |
| 5 x | MICROMOT Mains Adapter NG 5/E |
| 1 x | Top PSOP44 ZIF 600mil |
| 3 x | Replacement carving blades for MSG |
| 2 x | Diamond cutting blade for OZI |
| 1 x | BGA-0246/0243 |
| 1 x | BGA-Top-132 ZIF-CS |
| 6 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
| 1 x | BGA-Bottom-88 |
| 3 x | SmartProg2 |
| 2 x | IC tweezers |
| 1 x | BGA-0245/0242 |
| 2 x | Complete Engraving Kit with trial glass |
| 3 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 3 x | FLUX DISPENSING PEN, LEAD FREE |
| 2 x | Glass fibre contact cleaner brush |
| 1 x | Broca de ponto 3.15 x 1.25 |
| 1 x | BGA-Bottom-195 |
| 1 x | BGA-Bottom-196 |
| 3 x | Super-Cut |
| 1 x | DIL28/PLCC84 ZIF HS538ESC01H |
| 1 x | DIL24/TSSOP24 ZIF 170mil |
| 1 x | DIL18W/SOIC18 ZIF 300mil |
| 4 x | Replacement glue sticks for HKP 220 |
| 1 x | BGA-Bottom-199 |
| 1 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
| 1 x | BGA-Bottom-198 |
| 1 x | DIL28/PLCC28 ZIF |
| 1 x | BGA-Bottom-140 |
| 1 x | BGA-Bottom-147 |
| 1 x | sandpaper for PS 13 Grit 400 |
| 3 x | Bottom PSOP44 NOR-2 |
| 2 x | Boring Bar for CCMT 8mm |
| 1 x | BGA-Bottom-149 |
| 1 x | BGA-Bottom-209 |
| 2 x | MICROMOT Mains Adapter NG 2/S |
| 1 x | BGA-Bottom-14 |
| 1 x | BGA-Bottom-146 |
| 1 x | Replacement belts for BSL 220/E |
| 2 x | sandpaper for PS 13 Grot 180 |
| 3 x | Tungsten Carbide Tipped (TCT) |
| 1 x | sandpaper for PS 13 Grit 240 |
| 3 x | Replacement cutting wire for the THERMOCUT 12/E |
| 2 x | sanding belts for BBS/s Grit 240 |
| 1 x | BGA-Bottom-131 |
| 1 x | BGA-Bottom-138 |
| 1 x | BGA-Bottom-211 |
| 1 x | surface planing and thicknessing ADH 250 |
| 1 x | DIL24W/SOIC24 ZIF 300mil |
| 2 x | ROTARY COAXIAL CABLE STRIPPER 3-STEPS |
| 2 x | Professional polishing sponge |
| 1 x | BGA-Bottom-13 |
| 1 x | BGA-Bottom-21 |
| 1 x | Brass contact cleaner brush |
| 1 x | DIL20/PLCC20 ZIF-CS |
| 2 x | DIL14W/SOIC14 ZIF 150mil |
| 1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 2 x | Replacement belts for BSL 220/E |
| 1 x | Broca de ponto 8.00 x 3.15 |
| 1 x | BGA-Bottom-212 |
| 1 x | BGA-Bottom-214 |
| 2 x | MICROMOT 230/E |
| 1 x | BGA-Bottom-20 |
| 1 x | BGA-Bottom-207 |
| 2 x | Diamond Coated |
| 2 x | BGA-Bottom-125 |
| 2 x | Fine dust paper filter for CW-matic |
| 1 x | BGA-Bottom-16 |
| 1 x | BGA-Bottom-18 |
| 1 x | Safety Insulated Pozidriv Screwdriver 14-643VDE |
| 1 x | BGA-Bottom-174 |
| 1 x | DIL28W/SOIC28 ZIF 300mil |
| 1 x | BGA-Bottom-105 |
| 1 x | BGA-Bottom-11 |
| 1 x | DIL40/PLCC44 ZIF W-EPROM / MCS51 |
| 1 x | BGA-Bottom-154 |
| 1 x | BGA-Bottom-111 |
| 1 x | DIL40/PLCC52 ZIF DS87C530 |
| 1 x | Engraving tool GG |
| 1 x | BGA-Bottom-169 |
| 1 x | BGA-Bottom-187 |
| 1 x | DIL40/TSOP40 ZIF-CS 12.4mm |
| 1 x | WCMT050308 |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | BGA-0245/0243 |
| 2 x | BeeProg2 |
| 1 x | BGA-Bottom-165 |
| 1 x | BGA-Bottom-167 |
| 3 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 1 x | BeeHive208S |
| 1 x | DIL28/TSOP28 ZIF 11.8 mm |
| 1 x | BGA-Bottom-10 |
| 1 x | Turning inserts WCMX050308F |
| 2 x | SCMT09T304 |
| 3 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 1 x | DIL44/PSOP44 ZIF 600 mil |
| 1 x | BGA-Bottom-150 |
| 1 x | DIL48/PLCC68 ZIF MCS51-1 |
| 1 x | BGA-Bottom-101 |
| 2 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
| 1 x | Fluted filter for CW-matic |
| 2 x | Replacement belts for BSL 220/E |
| 1 x | MICRO Heat gun MH 550 |
| 1 x | DIL16W/SOIC16 ZIF 300mil |
| 1 x | BGA-Bottom-177 |
| 1 x | BGA-Bottom-173 |
| 1 x | Bottom PSOP44 NOR-1 |
| 1 x | DIL44/PLCC44 ZIF |
| 1 x | Quick-action tool holder kit SWH AA |
| 1 x | Broca de alta duração de 2.3mm |
| 1 x | BGA-Bottom-170 |
| 1 x | BGA-0246/0244 |
| 2 x | Threading inserts 60º |
| 2 x | 14-piece parallel supports set |
| 3 x | Lambswool polishing disc |
| 3 x | Super-fine sanding discs grain 000 |
| 3 x | 10-piece wood router cutter set |
| 2 x | Step clamps made of steel |
| 2 x | Aluminium Die-Cast |
| 3 x | Conjunto de três brocas de ponto |
| 3 x | Replacement cutting disc for MICRO cutter MIC |
| 1 x | DCMT070204 |
| 1 x | Bench drill machine TBM 220 |
| 2 x | Protective device for hand-operated MICROMOT |
| 4 x | Corundum fan sander for LWS |
| 1 x | Flap Wheels |
| 2 x | |
| 3 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Fibre-Cut Discs |
| 1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
| 1 x | Flexible polishing pad set |
| 1 x | High quality corundum grinding bits |
| 2 x | Compact workshop vacuum cleaner CW-matic |
| 1 x | Fibre-Cut Discs |
| 1 x | Polishing felt, medium hard |
| 2 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 3 x | Corundum grinding disc for LWS |
| 2 x | HSS cutting blade for OZI |
| 1 x | Dividing attachment TA 230 for PF 250 |
| 2 x | Diamond Cutting Discs |
| 1 x | 2-speed scroll saw DSH |
| 2 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 3 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 2 x | MICROMOT drill stand MB 200 |
| 1 x | Belt sander BS/E |
| 2 x | SCMT060204 |
| 1 x | Steel brushes |
| 2 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 3 x | BIT-SET |
| 2 x | Felt cloth polishing disc (100 x 15mm) |
| 1 x | Flexible polishing pad set |
| 2 x | High quality corundum grinding bits |
| 2 x | Backing disc for LWS |
| 1 x | Threading inserts 60º |
| 1 x | Collet Set for accurate use on round components |
| 3 x | Micro Compound Table KT 70 |
| 1 x | Threading inserts 60º |
| 1 x | Diamond Cutting Discs |
| 2 x | Corundum grinding disc for LWS |
| 2 x | Rounding over cutter 6.4mm |
| 2 x | Diamond-coated cutting disc for MIC |
| 3 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Five piece HSS chisel set |
| 3 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 2 x | MICROMOT extension cord. 300cm. |
| 2 x | HSS boring tool set, 6 pieces |
| 2 x | Precision lathe PD 250/E |
| 1 x | Angle polisher WP/E |
| 3 x | MICROMOT steel collet set |
| 1 x | Milling cutter set (6 - 10mm) |
| 1 x | MICROMOT tool holder |
| 1 x | Core box bit 3.2mm |
| 2 x | Flexishaft MICROMOT 110/BF |
| 2 x | Turning inserts CCMT09T304 |
| 1 x | High quality corundum grinding bits |
| 1 x | Ball-shaped diamond coated 1.2mm |
| 2 x | Angle cutter 45 ° |
| 3 x | Chuck for TBM 220 |
| 1 x | Centre Turning Attachment |
| 2 x | Footswitch FS |
| 2 x | Mill/Drill Unit BFB 2000. |
| 2 x | Slot cutter 6.5mm |
| 3 x | Corundum sanding discs for LWS |
| 1 x | Broca de ponto 6.30 x 2.50 |
| 2 x | Three-jaw steel drill chuck |
| 2 x | Turning inserts SCMT09T304 |
| 3 x | Corundum bound cutting disc for LWS |
| 2 x | Sanding Discs |
| 2 x | Corundum sanding discs for LWS |
| 2 x | Bench drill press TBH |
| 1 x | Bandsaw blade of bimetal for MBS 240/E |
| 1 x | Flexishaft MICROMOT 110/P |
| 1 x | High quality corundum grinding bits |
| 2 x | Diamond-coated cutting and roughing disc |
| 1 x | High quality corundum grinding bits |
| 1 x | Cutting disc, with reinforcement |
| 1 x | Brass brushes |
| 2 x | Cone shaped milling cutter |
| 1 x | Milling cutter set (2 - 5mm) |
| 1 x | Blade for Steel and brass |
| 2 x | Insert LGTN-3 |
| 2 x | Sanding fleece for LWS |
| 3 x | Corundum fan sander for LWS |
| 1 x | Turning inserts VCMT070204 |
| 2 x | Tungsten carbide cutters set |
| 2 x | V-slot cutter 6.5mm |
| 3 x | Universal polishing paste |
| 3 x | Tungstein carbide rasp - and cutting disc |
| 1 x | Tungsten carbide drills Ø2mm |
| 1 x | Cups brushes |
| 2 x | Microfibre cloth |
| 2 x | Tungsten carbide cutter 3.0mm |
| 2 x | Precision steel vice PM 40 |
| 2 x | Super safety and specialty bit set, 75-piece |
| 1 x | Sanding fleece for LWS |
| 1 x | Tungsten tipped saw blade |
| 1 x | Wheels brushes |
| 1 x | Tungsten carbide drills Ø1mm |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Combi cutter 6.5/2.5mm |
| 2 x | Super-fine sanding discs grain 2000 |
| 2 x | Super-fine sanding discs grain 400 |
| 1 x | Tungsten carbide cutter 2.0mm |
| 2 x | Half round cutter 13mm |
| 2 x | Edge cutter with pin 6.4mm |
| 1 x | Cotton polishers |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Microfibre polishing wheel, 15-ply (100mm) |
| 1 x | DEGRESER 200ml |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | Multipurpose Vices Primus100 |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | Solid carbide stylus for engraving |
| 1 x | BeeHive204 |
| 1 x | Radius Cutting Attachment, complete with pointed tool |
| 1 x | Sanding Drums |
| 1 x | CD-CLEANER 200ml |
| 1 x | TUNER 200ml |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 1 x | broca de alta duração de 0,6mm |
| 1 x | Diamond Grinding Bits 1,8mm |
| 1 x | Sanding Drums |
| 1 x | Sanding bands 14x13mm |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 1 x | Mill/Drill System BFW 40/E |
| 1 x | Flame shaped milling cutters |
| 1 x | MICRO Miller MF 70 |
| 2 x | Mini side cutters EUROline-Conductive |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | Cutting tool 16 mm |
| 1 x | Universal holder UHZ |
| 1 x | Turning inserts CCMT060204 |
| 1 x | Round nose pliers 45º EUROline-Conductive |
| 1 x | Cylindrical cutters |
| 1 x | Ball-shaped diamond coated 3.2mm |
| 2 x | Insert LGTN-2 |
| 1 x | End mill for aluminium 3mm |
| 1 x | Sanding Discs |
| 1 x | End side cutters 45º EUROline-Conductive |
| 1 x | BGA-Bottom-222 |
| 1 x | Lathe tools 10mm pastilhados |
| 1 x | BGA-Top-5 ZIF-CS |
| 1 x | MICROFLAM gas soldering set MGS |
| 1 x | sanding belts for BBS/s Grit 80 |
| 1 x | sclcr2525M12 |
| 1 x | BGA-Bottom-22 |
| 1 x | Wire strippers 165mm |
| 1 x | HSS immersion saw blades for OZI |
| 1 x | Boring Bar for CCMT 16mm |
| 2 x | Supercut jig saw blades of special steel |
| 1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
| 1 x | Morse taper MT2 - B16 |
| 1 x | BGA-Bottom-224 |
| 1 x | SMD Tweezers 5-071 |
| 1 x | Combination pliers 185mm |
| 1 x | Grinding mop cylinder grit 120 |
| 1 x | Steady rest for D250X550 |
| 1 x | Sanding pads for OZI 220/E grit 240 |
| 1 x | Silicon-Carbide. |
| 1 x | Telephone pliers stright 205mm |
| 1 x | DIL8/SOIC8 ZIF 200mil |
| 1 x | TCMT090204 |
| 1 x | DIL48/TSOP56 ZIF 18.4mm Flash-1 |
 |
| €40,748.42 |
