| 1 x | BGA-Bottom-103 |
| 2 x | RT150 - Horizontal-vertical circular dividing table |
| 1 x | sandpaper for PS 13 Grit 240 |
| 3 x | TCMT110204 |
| 1 x | Grinding mop cylinder grit 120 |
| 1 x | Flap Wheels |
| 1 x | Turning inserts WCMX050308F |
| 2 x | Turning inserts SCMT09T304 |
| 2 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
| 1 x | Sanding fleece for LWS |
| 1 x | Nylon Fleece Brushes |
| 1 x | BGA-Bottom-108 |
| 2 x | Edge cutter with pin 6.4mm |
| 1 x | Beeprog2C |
| 2 x | RT200 - Horizontal-vertical circular dividing table |
| 2 x | Angle cutter 45 ° |
| 1 x | Scroll saw DS 230/E |
| 1 x | BGA-Bottom-106 |
| 3 x | Router base OFV |
| 4 x | Lathe System PD 400 |
| 1 x | Cone shaped milling cutter |
| 2 x | Half round cutter 13mm |
| 2 x | Safety Insulated Phillips Screwdriver 14-632VDE |
| 2 x | Rounding over cutter 6.4mm |
| 2 x | Safety Insulated Phillips Screwdriver 14-633VDE |
| 2 x | Felt polishers |
| 1 x | Corundum grinding disc for LWS |
| 3 x | TU 2004V |
| 2 x | BeeProg2 |
| 1 x | Table Saw FET |
| 1 x | SCREEN 200ml |
| 2 x | 3-jaw chuck centrically clamping 160mm |
| 1 x | Set of precision cutters |
| 3 x | Threading inserts 60º |
| 1 x | BGA-0246/0244 |
| 2 x | Revolving center with replacement lathe centers |
| 2 x | Slot cutter 5.0mm |
| 1 x | Cutting tool HM 20 mm |
| 1 x | Solid carbide stylus for engraving |
| 1 x | Ball-shaped diamond coated 1.2mm |
| 1 x | Milling cutter set (6 - 10mm) |
| 3 x | TU 2404 |
| 2 x | Core box bit 3.2mm |
| 1 x | Corundum bound cutting disc for LWS |
| 1 x | Combi cutter 6.5/2.5mm |
| 1 x | Independent four jaw chuck for the DB 250 |
| 1 x | Disc cutters |
| 1 x | Corundum sanding discs for LWS |
| 1 x | Diamond Grinding Bits 1,8mm |
| 1 x | Tungsten carbide cutters set |
| 2 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 3 x | Polishing paste |
| 2 x | Cutter head for copy and surface milling MT3 |
| 1 x | BGA-Bottom-111 |
| 2 x | 6pcs Double Open End wrench set |
| 1 x | Ball-shaped diamond coated 3.2mm |
| 1 x | Tungsten carbide cutter 1.0mm |
| 1 x | BGA-Bottom-102 |
| 1 x | Sanding Drums |
| 1 x | Tungsten carbide cutter 2.0mm |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | Diamond-coated cutting and roughing disc |
| 2 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 1 x | Coarse-toothed (25 TPI per 25mm) |
| 1 x | Tungsten carbide cutter 3.0mm |
| 1 x | Thicknesser DH 40 |
| 1 x | BGA-Bottom-101 |
| 1 x | BGA-Bottom-1 |
| 2 x | Cutter head for copy and surface milling MT2 |
| 1 x | MICRO woodturning lathe DB 250 |
| 2 x | DCMT070204 |
| 1 x | BGA-Bottom-10 |
| 2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 3 x | TU 1503V |
| 1 x | BGA-Bottom-11 |
| 1 x | BGA-0245/0242 |
| 3 x | RT100 - Horizontal-vertical circular dividing table |
| 1 x | Sanding bands 14x13mm |
| 3 x | Threading inserts 60º |
| 1 x | Cutting tool 10 mm |
| 3 x | TCMT090204 |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | BeeHive208S |
| 2 x | MICROMOT Mains Adapter NG 2/S |
| 1 x | Sanding Discs |
| 1 x | Flap Wheels |
| 1 x | BeeHive204 |
| 1 x | Inspector mirror |
| 1 x | Safety Insulated Phillips Screwdriver 14-634VDE |
| 4 x | Warding files set, 6pcs |
| 1 x | Set of special steel cutters |
| 2 x | Stainless steel wheels |
| 1 x | Diamond Cutting Discs |
| 1 x | Diamond Grinding Bits 5mm |
| 2 x | 4-jaw chuck individually clamping 80mm |
| 1 x | Sanding Drums |
| 1 x | Jig saw STS 12/E |
| 2 x | MICRO shaper MP 400 |
| 1 x | Milling cutter set (2 - 5mm) |
| 1 x | Motor-driven carving device MSG |
| 3 x | SCMT060204 |
| 1 x | Cylinder shaped milling cutters |
| 1 x | Ball shaped milling cutters |
| 2 x | Rebating cutter 6.4mm |
| 1 x | Flame shaped milling cutters |
| 1 x | Diamond Twist Drills |
| 3 x | OPTI BF16 Vario |
| 2 x | V-slot cutter 6.5mm |
| 2 x | Slot cutter 3.2mm |
| 2 x | Backing disc for LWS |
| 1 x | Compact workshop vacuum cleaner CW-matic |
| 1 x | 2-speed scroll saw DSH |
| 1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 3 x | Stainless steel brushes |
| 1 x | Super jig saw STS/E |
| 1 x | Corundum fan sander for LWS |
| 2 x | Hand magnifier with LED light 3X |
| 2 x | quantum revolving center CM2 |
| 3 x | SCMT09T304 |
| 1 x | Diamond Cutting Discs |
| 1 x | Cutting tool 8 mm |
| 1 x | Sanding Drums |
| 1 x | BGA-Bottom-105 |
| 1 x | Diamond Cutting Discs |
| 1 x | MICROMOT Mains Adapter NG 2/E |
| 2 x | 10-piece wood router cutter set |
| 1 x | Sanding fleece for LWS |
| 1 x | Inpection mirror 1-978 |
| 3 x | Cutting disc, with reinforcement |
| 2 x | Slot cutter 6.5mm |
| 1 x | BGA-0245/0243 |
| 1 x | BGA-0245/0241 |
| 2 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 1 x | BGA-0246/0243 |
| 3 x | Cups brushes |
| 2 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
| 1 x | Replacement cutting wire for the THERMOCUT 12/E |
| 1 x | Turning inserts VCMT070204 |
| 2 x | DIL48/TSOP56 ZIF 18.4mm NOR-4 |
| 1 x | Coarse-toothed (18 TPI per 25mm) |
| 1 x | MICRO cutter MIC |
| 2 x | MICROMOT Mains Adapter NG 5/E |
| 2 x | Safety Insulated Phillips Screwdriver 14-631VDE |
| 1 x | Sanding Drums |
| 2 x | Turning inserts CCMT09T304 |
| 1 x | Surface planer AH 80 |
| 1 x | Diamond Grinding Bits 1mm |
| 1 x | Corundum sanding discs for LWS |
| 1 x | Three jaw chuck for the lathe DB 250 |
| 1 x | Five piece HSS chisel set |
| 1 x | sandpaper for PS 13 Grot 180 |
| 2 x | Precision quick-action drill chuck 0-16mm B16 |
| 1 x | Ball-shaped diamond coated 2.2mm |
| 1 x | Corundum grinding disc for LWS |
| 3 x | Steel cups |
| 1 x | MICRO Band Saw MBS 240/E |
| 1 x | Blade holders for DS 460 |
| 2 x | Stainless steel cups |
| 1 x | Spiral blade. 125mm long with plain ends (without pins). |
| 1 x | Sanding Discs |
| 1 x | BGA-Bottom-115 |
| 1 x | Coarse-toothed (10 TPI per 25mm) |
| 3 x | Threading inserts 60º |
| 1 x | Tungstein carbide rasp - and cutting disc |
| 1 x | Diamond Cutting Discs |
| 1 x | Cut off/mitre saw KGS 80 |
| 1 x | WCMT050308 |
| 2 x | quantum revolving center CM1 |
| 1 x | Cylindrical cutters |
| 2 x | Precision quick-action drill chuck 0-8mm B16 |
| 1 x | Digital caliper gauge 300 mm |
| 1 x | sandpaper for PS 13 Grit 400 |
| 1 x | Sanding bands 14x13mm |
| 3 x | Dial gauge |
| 1 x | Diamond Grinding Bits 1,8mm |
| 2 x | End milling cutter kit HSS 12 pcs |
| 1 x | Replacement glue sticks for HKP 220 |
| 3 x | Morse taper MT3 - B16 |
| 2 x | Safety insulated screwdrivers 14-606 VDE |
| 1 x | Tungsten carbide drills Ø2mm |
| 4 x | Polishing felt, medium hard |
| 1 x | Cotton polishers |
| 1 x | Flexishaft MICROMOT 110/BF |
| 1 x | Flexible polishing pad set |
| 1 x | Earth wire with dummy Schunko-plug |
| 1 x | Lambswool polishing disc |
| 1 x | HSS twist drill set with centring pin |
| 1 x | Cotton polishers |
| 1 x | Felt polishers |
| 2 x | Hot wire cutter THERMOCUT 230/E |
| 1 x | Self-adhesive silicone film for easy sanding disc replacement |
| 2 x | Precision magnetic gauge stand |
| 2 x | Safety insulated screwdrivers 14-603 VDE |
| 1 x | Mill/Drill Unit BFB 2000. |
| 1 x | HSS cutting blade for OZI |
| 1 x | HSS immersion saw blades for OZI |
| 1 x | Sanding pads for OZI 220/E grit 150 |
| 1 x | Earthing module |
| 1 x | MICROFLAM gas soldering set MGS |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Super-fine sanding discs grain 000 |
| 1 x | Super-fine sanding discs grain 400 |
| 1 x | Tool holder for rotary tools |
| 2 x | Precision quick-action drill chuck 0-13mm B16 |
| 1 x | Micro Compound Table KT 70 |
| 3 x | Morse taper MT2 - B16 |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Chuck for TBM 220 |
| 1 x | Safety insulated screwdrivers 14-604 VDE |
| 1 x | 4-jaw chuck individually clamping 100mm |
| 1 x | HSS drill bits 1.0mm |
| 1 x | 3-jaw chuck centrically clamping 80mm |
| 1 x | Protective device for hand-operated MICROMOT |
| 1 x | Aluminium Die-Cast |
| 1 x | Precision lathe PD 250/E |
| 1 x | Hot wire cutter THERMOCUT 650 |
| 1 x | precision machine vices FMS150 |
| 2 x | Safety insulated screwdrivers 14-601 VDE |
| 1 x | Wheels brushes |
| 1 x | Felt polishers |
| 2 x | Steel wheels |
| 2 x | Precision quick-action drill chuck 0-10mm B16 |
| 1 x | Sanding pads for OZI 220/E grit 240 |
| 1 x | Conjunto de três brocas de ponto |
| 1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
| 1 x | Dividing attachment TA 230 for PF 250 |
| 1 x | Flexible silicon discs |
| 1 x | Footswitch FS |
| 3 x | Precision quick-action drill chuck 0-10mm B16 |
| 1 x | Step clamps made of steel |
| 1 x | Fixed Steady |
| 1 x | Plastic magnifying glass |
| 1 x | Flexible silicon discs |
| 1 x | Microfibre polishing wheel, 15-ply (100mm) |
| 1 x | OPTI BF20L VARIO |
| 1 x | precision machine vices FMS100 |
| 1 x | centrically clamping 100mm |
| 2 x | Hot wire cutter THERMOCUT 12/E |
| 2 x | Safety insulated screwdrivers 14-602 VDE |
| 1 x | Flexible polishing pad set |
| 1 x | Lathe tools 10mm pastilhados |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Collet Set for accurate use on round components |
| 2 x | Safety insulated screwdrivers 14-608 VDE |
| 1 x | Four Jaw Chuck |
| 1 x | Tungsten carbide drills Ø1,5mm |
| 1 x | HSS drill bits 0.5mm |
| 1 x | sanding belts for BBS/s Grit 150 |
| 1 x | MICROMOT extension cord. 300cm. |
| 1 x | MICROMOT drill stand MB 200 |
| 1 x | 4-jaw chuck individually clamping 125mm |
| 1 x | Microfibre cloth |
| 1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 1 x | HSS drill bits 1.6mm |
| 1 x | Radius Cutting Attachment, complete with pointed tool |
| 1 x | OPTI BF20 VARIO |
| 1 x | Flexible silicon discs |
| 1 x | Three-jaw steel drill chuck |
| 1 x | 14-piece parallel supports set |
| 1 x | Glass fibre contact cleaner brush |
| 1 x | Sanding pads for OZI 220/E grit 80 |
| 1 x | Gear Chuck |
| 1 x | Brass brushes |
| 1 x | Cotton polishers |
| 1 x | Felt cloth polishing disc (100 x 15mm) |
| 1 x | Universal polishing paste |
| 1 x | Super-fine sanding discs grain 2000 |
| 1 x | Felt polishers |
| 1 x | centrically clamping 125mm |
 |
| €59,449.37 |
