1 x | Grinding mop cylinder grit 120 |
1 x | High quality corundum grinding bits |
1 x | HSS immersion saw blades for OZI |
2 x | Independent four jaw chuck for the DB 250 |
2 x | Lathe System PD 400 |
1 x | HSS cutting blade for OZI |
2 x | CRIMPING PLIERS/WIRE STRIPPER |
2 x | Radius Cutting Attachment, complete with pointed tool |
1 x | Sanding Drums |
1 x | Ball shaped milling cutters |
2 x | Three-jaw steel drill chuck |
2 x | Replacement belts for BSL 220/E |
1 x | Sanding Discs |
3 x | 10-piece wood router cutter set |
2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | Bandsaw blade of bimetal for MBS 240/E |
2 x | Machine Vice MS 4 |
1 x | High quality corundum grinding bits |
1 x | Felt polishers |
1 x | Precision Vice FMZ |
1 x | Corundum fan sander for LWS |
3 x | Mill/Drill Unit BFB 2000. |
2 x | Four Jaw Chuck |
2 x | Professional set for finish grinding and polishing |
2 x | CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C |
2 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
2 x | Fixed Steady |
2 x | Micro Compound Table KT 70 |
1 x | Diamond Cutting Discs |
2 x | Gear Chuck |
1 x | Belt sander BS/E |
3 x | Collet Set for accurate use on round components |
2 x | Replacement belts for BSL 220/E |
2 x | Tool holder for rotary tools |
1 x | Fine dust paper filter for CW-matic |
3 x | Backing disc for LWS |
1 x | Tungstein carbide rasp - and cutting disc |
1 x | Grinding mop cylinder grit 120 |
1 x | MICROMOT tool holder |
1 x | Belt sander BBS/S |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
2 x | MICROMOT drill stand MB 200 |
3 x | Precision steel vice PM 40 |
1 x | HSS immersion saw blades for OZI |
3 x | Precision lathe PD 250/E |
1 x | Coarse-toothed (25 TPI per 25mm) |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | 2-speed scroll saw DSH |
1 x | Crimping plier for BNC |
1 x | Sanding Drums |
2 x | MICROMOT Mains Adapter NG 5/E |
1 x | Tungsten carbide cutters set |
1 x | High quality corundum grinding bits |
1 x | Super-fine sanding discs grain 000 |
1 x | Drill chuck with sliding sleeve for the tailstock |
1 x | Grinding mop cylinder grit 80 |
1 x | MICRO Miller FF 230 |
1 x | High quality corundum grinding bits |
2 x | Corundum grinding disc for LWS |
3 x | Aluminium Die-Cast |
1 x | V-slot cutter 6.5mm |
1 x | Edge cutter with pin 6.4mm |
1 x | HSS twist drill set to DIN 338 |
1 x | Blade for Steel and brass |
1 x | Corundum fan sander for LWS |
3 x | Dividing attachment TA 230 for PF 250 |
1 x | Coarse-toothed (10 TPI per 25mm) |
1 x | Ball-shaped diamond coated 2.2mm |
1 x | MICROMOT extension cord. 300cm. |
1 x | Compact workshop vacuum cleaner CW-matic |
1 x | Fibre-Cut Discs |
2 x | Flexishaft MICROMOT 110/BF |
1 x | Ball-shaped diamond coated 1.2mm |
1 x | Blade holders for DS 460 |
2 x | Cutting disc, with reinforcement |
2 x | STRIPPING TOOL WITH ADJUSTABLE KNIVES |
1 x | Universal and oil siphoning pump AP 12 |
3 x | Centre Turning Attachment |
1 x | Slot cutter 6.5mm |
1 x | Sanding pads for OZI 220/E grit 150 |
2 x | Flexishaft MICROMOT 110/P |
2 x | Protective device for hand-operated MICROMOT |
2 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | Diamond Cutting Discs |
1 x | Fluted filter for CW-matic |
1 x | Slot cutter 5.0mm |
2 x | Corundum sanding discs for LWS |
1 x | Combi cutter 6.5/2.5mm |
1 x | High quality corundum grinding bits |
1 x | Three piece thread cutting set |
2 x | Angle cutter 45 ° |
1 x | Five piece HSS chisel set |
2 x | Corundum grinding disc for LWS |
1 x | Half round cutter 13mm |
2 x | Multipurpose Vices Primus 75 |
1 x | Wolfram vanadium steel milling bits |
1 x | Flap Wheels |
2 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
1 x | Rounding over cutter 6.4mm |
1 x | Mill/Drill System BFW 40/E |
2 x | ROTARY COAXIAL CABLE STRIPPER 3-STEPS |
1 x | Sanding pads for OZI 220/E grit 240 |
1 x | Felt polishers |
1 x | MICROMOT Mains Adapter NG 2/E |
2 x | Chuck for TBM 220 |
1 x | MICROMOT steel collet set |
1 x | Felt polishers |
1 x | High quality corundum grinding bits |
1 x | Lambswool polishing disc |
3 x | 14-piece parallel supports set |
1 x | Diamond Coated |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
2 x | |
1 x | Diamond-coated cutting and roughing disc |
2 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | Angle polisher WP/E |
2 x | Replacement belts for BSL 220/E |
1 x | BeeHive208S |
1 x | Special Fused Alumina (Hardness N). |
1 x | Replacement cutting wire for the THERMOCUT 12/E |
2 x | Multipurpose Vices Primus100 |
1 x | Router base OFV |
1 x | MICRO shaper MP 400 |
2 x | Diamond Cutting Discs |
1 x | Spiral blade. 125mm long with plain ends (without pins). |
2 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
1 x | Hot wire cutter THERMOCUT 12/E |
1 x | Hot wire cutter THERMOCUT 650 |
1 x | Sanding pads for OZI 220/E grit 80 |
1 x | MICROMOT Mains Adapter NG 2/S |
1 x | Bench drill press TBH |
2 x | Fibre-Cut Discs |
1 x | Bench Circular Saw KS 230 |
1 x | Sanding bands 14x13mm |
1 x | Polishing felt, medium hard |
1 x | Professional polishing sponge |
1 x | Diamond Grinding Bits 1,8mm |
1 x | Thicknesser DH 40 |
1 x | Fibre-Cut Discs |
2 x | Footswitch FS |
1 x | Felt polishers |
1 x | Diamond-coated cutting disc for MIC |
1 x | High quality corundum grinding bits |
1 x | Screwdriver bit set. 49-piece. |
1 x | Bench drill machine TBM 220 |
1 x | Super-fine sanding discs grain 400 |
1 x | Microfibre cloth |
2 x | Super safety and specialty bit set, 75-piece |
1 x | Silicon-Carbide. |
1 x | Steel brushes |
1 x | Core box bit 3.2mm |
1 x | Super-fine sanding discs grain 2000 |
1 x | Band knife of hardened spring band steel (without teeth) |
1 x | Universal holder UHZ |
1 x | Conjunto de três brocas de ponto |
1 x | Engraving tool GG |
1 x | Diamond cutting blade for OZI |
1 x | Polishing Set |
1 x | Step clamps made of steel |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
1 x | Slot cutter 3.2mm |
1 x | BeeHive204 |
1 x | Ball-shaped diamond coated 3.2mm |
1 x | Precision Vice FMS 75 |
1 x | High quality corundum grinding bits |
1 x | Coarse-toothed (18 TPI per 25mm) |
1 x | Corundum sanding discs for LWS |
1 x | Wolfram vanadium steel milling bits |
1 x | Three jaw chuck for the lathe DB 250 |
1 x | Felt cloth polishing disc (100 x 15mm) |
1 x | HSS boring tool set, 6 pieces |
1 x | Grinding mop cylinder grit 240 |
1 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | Brass brushes |
1 x | MICROMOT 50/E |
1 x | Cylindrical cutters |
1 x | SmartProg2 |
1 x | Precision Drill/Grinder FBS 240/E |
1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
1 x | Disc cutters |
1 x | Cylinder shaped milling cutters |
1 x | Diamond Grinding Bits 1,8mm |
1 x | Solid carbide saw blade |
|
€26,813.62 |