3 x | PLCC Puller |
1 x | Blade guides separately |
1 x | Felt polishers |
1 x | Four Jaw Chuck |
2 x | MICRO cutter MIC |
1 x | Cotton polishers |
1 x | DIL24/QSOP24 ZIF 150mil |
1 x | DIL40/SOIC20 ZIF MB95-1 |
1 x | BGA-Bottom-111 |
2 x | Tungsten carbide cutter 3.0mm |
1 x | Collet Set for accurate use on round components |
2 x | TORQUE-SCREWDRIVER 1.5 - 4.0 Nm |
5 x | Flexishaft MICROMOT 110/BF |
1 x | BGA-Bottom-105 |
1 x | Bandsaw blade of bimetal for MBS 240/E |
1 x | DIL32/PLCC84 ZIF HS3334ESCF1H |
1 x | Broca de alta duração de 0.3mm |
1 x | Broca de alta duração de 1.1mm |
1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
1 x | Multipurpose Vices Primus100 |
1 x | Broca de alta duração de 1.5mm |
2 x | Blade for Steel and brass |
1 x | DIL40/PLCC44 ZIF PIC-1 |
2 x | Universal holder UHZ |
2 x | Flexible silicon discs |
1 x | Polishing paste |
2 x | broca de alta duração de 0,2mm |
1 x | Lathe System PD 400 |
2 x | Diamond Twist Drills |
1 x | Diamond Grinding Bits 1,8mm |
1 x | Radius Cutting Attachment, complete with pointed tool |
3 x | Three-jaw steel drill chuck |
1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
2 x | Universal polishing paste |
4 x | Special Fused Alumina (Hardness N). |
2 x | Ball-shaped diamond coated 3.2mm |
2 x | Handy 1515 |
2 x | Ball-shaped diamond coated 1.2mm |
1 x | MICROMOT extension cord. 300cm. |
1 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
1 x | DIL24W/SOIC24 ZIF 300mil |
1 x | Cotton polishers |
1 x | DIL48/SDIP56 ZIF 68HC05Bx |
1 x | Ball-shaped diamond coated 2.2mm |
1 x | Band knife of hardened spring band steel (without teeth) |
1 x | BGA-Bottom-115 |
1 x | Broca de alta duração de 2.2mm |
1 x | TU 1503V |
1 x | Bench drill press TBH |
1 x | Broca de alta duração de 1.0mm |
3 x | Machine Vice MS 4 |
1 x | MICROMOT tool holder |
1 x | Centre Turning Attachment |
1 x | BGA-Bottom-10 |
1 x | Diamond blade for MBS 240/E |
1 x | Bottom PSOP44 NOR-1 |
1 x | DIL40/TQFP44 ZIF EM652X |
1 x | Broca de alta duração de 2.6mm |
3 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Broca de alta duração de 0.8mm |
3 x | Spare cutting wire |
2 x | 6-piece screwdriver and cross-recess set |
2 x | MICROMOT drill stand MB 200 |
2 x | 6-piece screwdriver and cross-recess set |
1 x | Broca de alta duração de 2.0mm |
2 x | Silicon-Carbide. |
2 x | Rounding over cutter 6.4mm |
2 x | Hot wire cutter THERMOCUT 12/E |
3 x | Engraving tool GG |
4 x | TIP SPT-10 |
2 x | High quality corundum grinding bits |
1 x | Solid carbide saw blade |
2 x | Mini side cutters EUROline-Conductive |
2 x | End side cutters EUROline-Conductive |
2 x | Fibre-Cut Discs |
2 x | TIP SPT-6 |
2 x | MICROFLAME burner MFB/E |
2 x | MICRO-screwdrivers |
2 x | Compact workshop vacuum cleaner CW-matic |
2 x | Diamond Cutting Discs |
1 x | Mini side cutters EUROline-Conductive |
1 x | Sanding Drums |
1 x | EUROline-Conductive set of pliers |
2 x | Diamond Cutting Discs |
3 x | Rebating cutter 6.4mm |
2 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Dividing attachment TA 230 for PF 250 |
1 x | Delta sander OZI/E |
1 x | Universal and oil siphoning pump AP 12 |
1 x | Flame shaped milling cutters |
2 x | Protective device for hand-operated MICROMOT |
1 x | High quality corundum grinding bits |
2 x | Fibre-Cut Discs |
2 x | Inspector mirror |
1 x | Long neck angle grinder LHW |
3 x | Set of special steel cutters |
2 x | Aluminium Die-Cast |
2 x | 10-piece wood router cutter set |
7 x | Footswitch FS |
3 x | Slot cutter 3.2mm |
1 x | Side cutters EUROline-Conductive |
2 x | Fibre-Cut Discs |
3 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Super-fine sanding discs grain 2000 |
4 x | Combi cutter 6.5/2.5mm |
1 x | Mill/Drill Unit BFB 2000. |
2 x | Hot wire cutter THERMOCUT 650 |
3 x | Wolfram vanadium steel milling bits |
2 x | Micro Compound Table KT 70 |
1 x | Replacement cutting wire for the THERMOCUT 12/E |
1 x | TIP SPT-3 |
3 x | Slot cutter 5.0mm |
1 x | Angle cutter 45 ° |
2 x | Core box bit 3.2mm |
1 x | Replacement belts for BSL 220/E |
2 x | Hot wire cutter THERMOCUT 230/E |
1 x | Coarse-toothed (18 TPI per 25mm) |
2 x | Diamond Cutting Discs |
1 x | Complete Engraving Kit with trial glass |
2 x | Table Sawr TKS 315 E |
2 x | Blade holders for DS 460 |
2 x | Half round cutter 13mm |
2 x | Diamond Cutting Discs |
2 x | Vacum SAA 901 |
1 x | MICROFLAM gas soldering set MGS |
1 x | |
2 x | Slot cutter 6.5mm |
1 x | Coarse-toothed (25 TPI per 25mm) |
2 x | Metal Cutting Blades |
1 x | MICRO Heat gun MH 550 |
1 x | MICROMOT glue gun HKP 220 |
1 x | High quality corundum grinding bits |
1 x | SmartProg2 |
1 x | Microfibre cloth |
1 x | MICROMOT steel collet set |
1 x | Super safety and specialty bit set, 75-piece |
1 x | Replacement belts for BSL 220/E |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
1 x | Mini side cutters EUROline-Conductive |
1 x | Screwdriver 1.5 |
1 x | High quality corundum grinding bits |
2 x | Cone shaped milling cutter |
1 x | Professional set for finish grinding and polishing |
2 x | Three jaw chuck for the lathe DB 250 |
3 x | Milling cutter set (2 - 5mm) |
2 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
1 x | Corundum sanding discs for LWS |
1 x | Steel cups |
1 x | Inpection mirror 1-978 |
1 x | Table Saw FET |
1 x | Fluted filter for CW-matic |
1 x | DIL48/QFN48 ZIF-CS |
1 x | Milling cutter set (6 - 10mm) |
1 x | Tungsten Carbide Tipped (TCT) |
1 x | Drill chuck with sliding sleeve for the tailstock |
1 x | Stainless steel cups |
1 x | Broca de alta duração de 1.3mm |
1 x | Fine dust paper filter for CW-matic |
1 x | DIL32/QFP64 ZIF H8-1 |
2 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | DIL28/QFP64 ZIF H8/3644 |
1 x | Felt cloth polishing disc (100 x 15mm) |
1 x | Steel wheels |
2 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
1 x | DIL32/TSOP32 ZIF 11.8mm |
1 x | EUROline set of pliers |
1 x | Combination pliers 210mm |
1 x | DIL28/TSOP28 ZIF 11,8mm Flash |
1 x | HSS drill bits 1.2mm |
1 x | MICRO woodturning lathe DB 250 |
2 x | EUROline top cutter |
1 x | Blade for Wood and Plastics |
1 x | ESD Brushe |
2 x | Corundum grinding disc for LWS |
2 x | EUROline round nose pliers |
1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
1 x | Replacement cutting disc for MICRO cutter MIC |
1 x | EUROline side cutter pointed head |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | DIL32/TSOP32 ZIF 18.4mm Flash |
1 x | DIL48/TSOP56 ZIF 18.4mm NOR-4 |
3 x | EUROline mini side cutter |
1 x | DIL48/LQFP64 ZIF M38039/M39049 |
1 x | Diamond-coated cutting and roughing disc |
1 x | Three piece thread cutting set |
1 x | DIL32/TSOP32 ZIF 12.4mm Flash |
1 x | Warding files set, 6pcs |
1 x | Thicknesser DH 40 |
1 x | Precision Vice FMS 75 |
1 x | DIL40/QFP64-3 ZIF NEC-1 |
1 x | EUROline mini side cutter |
1 x | DIL44/QFN44-2 ZIF-CS |
1 x | Five piece HSS chisel set |
1 x | Sanding fleece for LWS |
1 x | DIL40/QFP144 ZIF H8S-1 |
1 x | Corundum fan sander for LWS |
1 x | HSS drill bits 1.6mm |
1 x | Super-Cut |
1 x | 14-piece parallel supports set |
1 x | DIL40/TSOP40 ZIF 18.4mm Flash-1 |
1 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | EUROline side cutter rounded head |
1 x | Scroll saw DS 230/E |
1 x | Sanding pads for OZI 220/E grit 240 |
1 x | Super-fine sanding discs grain 400 |
1 x | OPTI BF20 VARIO |
1 x | DEGRESER 200ml |
1 x | Angle polisher WP/E |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Pensander PS 13 |
1 x | High quality corundum grinding bits |
1 x | Lambswool polishing disc |
1 x | Multiform grindstone |
1 x | Cylinder sander WAS/E |
|
€19,989.91 |