1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
1 x | Bandsaw blade of bimetal for MBS 240/E |
1 x | MICRO Miller FF 500 |
1 x | Fluted filter for CW-matic |
1 x | Diamond blade for MBS 240/E |
1 x | Slot cutter 5.0mm |
2 x | Half round cutter 13mm |
1 x | Band knife of hardened spring band steel (without teeth) |
2 x | Metal Cutting Blades |
1 x | HSS drill bits 1.2mm |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Rebating cutter 6.4mm |
1 x | Rounding over cutter 6.4mm |
1 x | Tool holder for rotary tools |
1 x | Corundum sanding discs for LWS |
1 x | Angle cutter 45 ° |
1 x | Four Jaw Chuck |
1 x | Slot cutter 6.5mm |
1 x | Lathe System PD 400 |
1 x | Slot cutter 3.2mm |
1 x | Combi cutter 6.5/2.5mm |
1 x | Three piece thread cutting set |
1 x | HSS boring tool set, 6 pieces |
1 x | Diamond-coated cutting and roughing disc |
1 x | Sanding Drums |
1 x | Corundum fan sander for LWS |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Tungsten carbide drills Ø2mm |
1 x | 10-piece wood router cutter set |
2 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Corundum sanding discs for LWS |
1 x | Corundum grinding disc for LWS |
1 x | Tungsten carbide drills Ø1mm |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
3 x | Centre Turning Attachment |
1 x | High quality corundum grinding bits |
1 x | Sanding fleece for LWS |
1 x | Screwdriver bit set. 49-piece. |
2 x | Collet Set for accurate use on round components |
2 x | High quality corundum grinding bits |
1 x | Diamond Twist Drills |
1 x | Replacement cutting disc for MICRO cutter MIC |
1 x | Nylon Fleece Brushes |
2 x | 14-piece parallel supports set |
1 x | Safety Insulated Phillips Screwdriver 14-632VDE |
1 x | Diamond-coated cutting disc for MIC |
1 x | Radius Cutting Attachment, complete with pointed tool |
1 x | Safety Insulated Phillips Screwdriver 14-633VDE |
1 x | HSS drill bits 1.6mm |
1 x | Multiform grindstone |
3 x | Three-jaw steel drill chuck |
1 x | MICROMOT Mains Adapter NG 2/S |
2 x | Tungsten Carbide Tipped (TCT) |
2 x | Super-Cut |
1 x | TORQUE-SCREWDRIVER 1.5 - 4.0 Nm |
1 x | Fibre-Cut Discs |
1 x | Step clamps made of steel |
2 x | Chuck for TBM 220 |
2 x | Replacement cutting wire for the THERMOCUT 12/E |
1 x | Replacement carving blades for MSG |
1 x | Aluminium Die-Cast |
2 x | Router base OFV |
2 x | Super-fine sanding discs grain 2000 |
1 x | Felt cloth polishing disc (100 x 15mm) |
1 x | Fibre-Cut Discs |
3 x | Replacement belts for BSL 220/E |
1 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | Compact workshop vacuum cleaner CW-matic |
3 x | Dividing attachment TA 230 for PF 250 |
1 x | High quality corundum grinding bits |
1 x | Diamond Cutting Discs |
2 x | Micro Compound Table KT 70 |
1 x | Diamond Cutting Discs |
1 x | Fibre-Cut Discs |
1 x | Diamond Cutting Discs |
2 x | Backing disc for LWS |
1 x | Professional set for finish grinding and polishing |
1 x | MICROMOT Mains Adapter NG 5/E |
1 x | Magnetic base |
1 x | Cutting disc, with reinforcement |
2 x | Universal and oil siphoning pump AP 12 |
1 x | Three jaw chuck for the lathe DB 250 |
1 x | Fibre-Cut Discs |
1 x | High quality corundum grinding bits |
1 x | Diamond Cutting Discs |
1 x | High quality corundum grinding bits |
1 x | Engraving tool GG |
1 x | Fibre-Cut Discs |
1 x | Mill/Drill Unit BFB 2000. |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | High quality corundum grinding bits |
1 x | Replacement glue sticks for HKP 220 |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Broca de alta duração de 2.3mm |
1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | Broca de alta duração de 1.5mm |
1 x | Sanding fleece for LWS |
1 x | End side cutters 45º EUROline-Conductive |
1 x | Flexishaft MICROMOT 110/P |
1 x | Broca de alta duração de 2.4mm |
1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
1 x | Flexible silicon discs |
1 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
1 x | Solid carbide stylus for engraving |
1 x | Flexible silicon discs |
1 x | broca de alta duração de 0,6mm |
1 x | Crosscut 'Super-Cut' blade |
1 x | Polishing felt, medium hard |
1 x | Footswitch FS |
1 x | Pensander PS 13 |
1 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
1 x | Protective device for hand-operated MICROMOT |
1 x | EUROline-Conductive set of pliers |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Lambswool polishing disc |
1 x | Broca de alta duração de 0.4mm |
1 x | Broca de alta duração de 1.3mm |
1 x | Solid carbide stylus for engraving |
2 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | Coarse-toothed (25 TPI per 25mm) |
1 x | Broca de alta duração de 1.4mm |
1 x | Broca de alta duração de 0.3mm |
1 x | Microfibre cloth |
1 x | Spiral blade. 125mm long with plain ends (without pins). |
1 x | HSS cutting blade for OZI |
1 x | Flap Wheels |
2 x | Broca de alta duração de 1.0mm |
1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | Cylinder shaped milling cutters |
1 x | surface planing and thicknessing ADH 250 |
1 x | Broca de alta duração de 3.0mm |
1 x | Wolfram vanadium steel milling bits |
1 x | Broca de alta duração de 1.2mm |
1 x | Diamond blade |
1 x | Side cutters EUROline-Conductive |
1 x | Cone shaped milling cutter |
1 x | Broca de alta duração de 2.6mm |
|
€8,973.94 |