| 2 x | Ball shaped milling cutters |
| 2 x | Tungsten carbide cutter 2.0mm |
| 1 x | Corundum bound cutting disc for LWS |
| 2 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 1 x | Cotton polishers |
| 1 x | Step clamps made of steel |
| 3 x | Core box bit 3.2mm |
| 2 x | Set of precision cutters |
| 2 x | Sanding fleece for LWS |
| 1 x | Rebating cutter 6.4mm |
| 2 x | Corundum grinding disc for LWS |
| 2 x | Diamond Cutting Discs |
| 2 x | Radius Cutting Attachment, complete with pointed tool |
| 2 x | Diamond Grinding Bits 1,8mm |
| 2 x | Grinding mop cylinder grit 80 |
| 3 x | HSS boring tool set, 6 pieces |
| 1 x | Ball-shaped diamond coated 2.2mm |
| 2 x | Diamond Grinding Bits 1mm |
| 2 x | Corundum fan sander for LWS |
| 3 x | Disc cutters |
| 5 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Jig saw STS 12/E |
| 1 x | Replacement carving blades for MSG |
| 4 x | Super-fine sanding discs grain 000 |
| 2 x | Diamond-coated cutting and roughing disc |
| 1 x | Disc Sander TG 250/E |
| 2 x | Flexible silicon discs |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Grinding mop cylinder grit 240 |
| 1 x | MICRO Heat gun MH 550 |
| 1 x | Dividing attachment TA 230 for PF 250 |
| 2 x | Polishing felt, medium hard |
| 5 x | Lathe System PD 400 |
| 1 x | Multipurpose Vices Primus 75 |
| 2 x | Solid carbide stylus for engraving |
| 2 x | Microfibre cloth |
| 1 x | HSS immersion saw blades for OZI |
| 3 x | Replacement cutting disc for MICRO cutter MIC |
| 2 x | Grinding mop cylinder grit 120 |
| 1 x | Diamond Coated |
| 1 x | MICRO Miller MF 70 |
| 1 x | Multipurpose Vices Primus100 |
| 1 x | Fixed Steady |
| 1 x | Sanding Discs |
| 2 x | 14-piece parallel supports set |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 1 x | Flexishaft MICROMOT 110/P |
| 1 x | Diamond-coated cutting disc for MIC |
| 1 x | Super safety and specialty bit set, 75-piece |
| 4 x | Lambswool polishing disc |
| 5 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Fine dust paper filter for CW-matic |
| 3 x | Professional set for finish grinding and polishing |
| 1 x | Slot cutter 6.5mm |
| 1 x | Slot cutter 3.2mm |
| 1 x | Cylinder sander WAS/E |
| 4 x | Three piece thread cutting set |
| 1 x | Sanding fleece for LWS |
| 3 x | Precision lathe PD 250/E |
| 1 x | Slot cutter 5.0mm |
| 2 x | Flexible silicon discs |
| 2 x | Flame shaped milling cutters |
| 3 x | Cylindrical cutters |
| 1 x | Mill/Drill Unit BFB 2000. |
| 1 x | Insulation Resistance Tester MG500 |
| 1 x | MICRO Band Saw MBS 240/E |
| 1 x | Bench drill press TBH |
| 1 x | Angle cutter 45 ° |
| 1 x | HSS twist drill set with centring pin |
| 3 x | Professional polishing sponge |
| 1 x | EUROline-Conductive set of pliers |
| 2 x | Corundum sanding discs for LWS |
| 1 x | Cups brushes |
| 1 x | Micro Compound Table KT 70 |
| 2 x | Corundum fan sander for LWS |
| 1 x | Metal Cutting Blades |
| 1 x | Cutting disc, with reinforcement |
| 1 x | Screwdriver bit set. 49-piece. |
| 1 x | Gear Chuck |
| 2 x | Tungsten carbide cutter 1.0mm |
| 1 x | V-slot cutter 6.5mm |
| 3 x | Super-fine sanding discs grain 400 |
| 1 x | Sanding bands 14x13mm |
| 1 x | Ball-shaped diamond coated 3.2mm |
| 2 x | Diamond Grinding Bits 1,8mm |
| 2 x | Half round cutter 13mm |
| 1 x | Four Jaw Chuck |
| 1 x | sanding belts for BBS/s Grit 240 |
| 1 x | Tungsten Carbide Tipped (TCT) |
| 1 x | End side cutters 45º EUROline-Conductive |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | sanding belts for BBS/s Grit 80 |
| 1 x | MICRO Miller FF 500 |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 2 x | Diamond Cutting Discs |
| 2 x | Corundum grinding disc for LWS |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | Footswitch FS |
| 1 x | Diamond blade for MBS 240/E |
| 1 x | sanding belts for BBS/s Grit 150 |
| 1 x | Long neck straight drill/grinder LB/E |
| 2 x | Set of special steel cutters |
| 1 x | Flat nose pliers 45º EUROline-Conductive |
| 1 x | Tungsten carbide cutters set |
| 1 x | Diamond Twist Drills |
| 2 x | Diamond cutting blade for OZI |
| 1 x | Independent four jaw chuck for the DB 250 |
| 1 x | Centre Turning Attachment |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | End side cutters EUROline-Conductive |
| 1 x | Router base OFV |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 2 x | Flexible silicon discs |
| 1 x | Collet Set for accurate use on round components |
| 1 x | Grinding and Polishing Machine SP/E |
| 2 x | Diamond Grinding Bits 5mm |
| 2 x | Corundum sanding discs for LWS |
| 1 x | MICRO shaper MP 400 |
| 1 x | Flexible polishing pad set |
| 1 x | Cylinder shaped milling cutters |
| 1 x | Cotton polishers |
| 2 x | Wolfram vanadium steel milling bits |
| 2 x | MICRO Miller FF 230 |
| 1 x | Aluminium Die-Cast |
| 2 x | Tungstein carbide rasp - and cutting disc |
| 1 x | Super-Cut |
| 1 x | TU 2004V |
| 2 x | Flap Wheels |
| 1 x | Machine Vice MS 4 |
| 1 x | High quality corundum grinding bits |
| 1 x | Diamond blade |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | Insulation Resistance Tester MG125 |
| 1 x | Conjunto de três brocas de ponto |
| 1 x | Super-fine sanding discs grain 2000 |
| 2 x | Backing disc for LWS |
| 1 x | Jig saw blades made of HSS |
| 1 x | Combi cutter 6.5/2.5mm |
| 1 x | Disc Sander TG 125/E |
| 1 x | MICRO cutter MIC |
| 1 x | Mill/Drill System BFW 40/E |
| 1 x | Edge cutter with pin 6.4mm |
| 1 x | 10-piece wood router cutter set |
| 1 x | Diamond Cutting Discs |
| 1 x | Protective device for hand-operated MICROMOT |
| 1 x | Long neck angle grinder LHW |
| 1 x | Inpection mirror 1-978 |
| 1 x | Rounding over cutter 6.4mm |
| 1 x | Mini side cutters EUROline-Conductive |
 |
| €24,446.44 |
