1 x | Supercut jig saw blades of special steel |
3 x | Bandsaw blade of bimetal for MBS 240/E |
1 x | Compact workshop vacuum cleaner CW-matic |
1 x | Micro Compound Table KT 70 |
1 x | Replacement carving blades for MSG |
1 x | EUROline end cutter |
1 x | Super-Cut |
2 x | Three jaw chuck for the lathe DB 250 |
2 x | Diamond Coated |
1 x | MICROMOT extension cord. 300cm. |
2 x | Cylinder sander WAS/E |
1 x | MICROMOT 230/E |
3 x | Footswitch FS |
2 x | Super safety and specialty bit set, 75-piece |
1 x | Disc Sander TG 125/E |
1 x | MICROMOT Mains Adapter NG 2/E |
1 x | EUROline side cutter rounded head |
1 x | EUROline mini side cutter |
1 x | Pensander PS 13 |
1 x | Polishing machine PM 100 |
2 x | Five piece HSS chisel set |
1 x | Band knife of hardened spring band steel (without teeth) |
1 x | Replacement belts for BSL 220/E |
1 x | Professional Drill/Grinder IBS/E |
1 x | MICROMOT 50 |
2 x | Grinding mop cylinder grit 80 |
2 x | Drill chuck with sliding sleeve for the tailstock |
1 x | Polishing Set |
3 x | Independent four jaw chuck for the DB 250 |
1 x | Dividing attachment TA 230 for PF 250 |
2 x | Spare cutting wire |
1 x | Blade guides separately |
2 x | Belt sander BS/E |
1 x | EUROline snipe nose pliers |
1 x | MICROMOT steel collet set |
2 x | Tungsten Carbide Tipped (TCT) |
1 x | Disc Sander TG 250/E |
1 x | Jig saw blades made of HSS |
2 x | Bench drill press TBH |
1 x | Three-jaw steel drill chuck |
2 x | Chuck for TBM 220 |
2 x | Grinding mop cylinder grit 120 |
1 x | sanding belts for BBS/s Grit 150 |
1 x | Precision Drill/Grinder FBS 240/E |
1 x | 6-piece screwdriver and cross-recess set |
2 x | EUROline mini side cutter |
2 x | Mill/Drill Unit BFB 2000. |
1 x | Complete Engraving Kit with trial glass |
1 x | Blade for Steel and brass |
1 x | Cutting disc, with reinforcement |
1 x | MICROMOT 50/E |
1 x | Universal and oil siphoning pump AP 12 |
1 x | Blade for Wood and Plastics |
1 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
1 x | Replacement belts for BSL 220/E |
1 x | Bench drill machine TBM 220 |
1 x | Long neck angle grinder LHW |
1 x | Belt sander BBS/S |
1 x | Diamond blade for MBS 240/E |
1 x | Router base OFV |
2 x | Replacement belts for BSL 220/E |
1 x | MICRO Miller FF 500 |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
1 x | Special Fused Alumina (Hardness N). |
1 x | Grinding mop cylinder grit 240 |
1 x | Sanding Drums |
2 x | Combi cutter 6.5/2.5mm |
1 x | Engraving tool GG |
2 x | Broca de alta duração de 2.7mm |
1 x | Corundum sanding discs for LWS |
3 x | 10-piece wood router cutter set |
1 x | Spiral blade. 125mm long with plain ends (without pins). |
2 x | Tungsten carbide cutter 2.0mm |
2 x | Broca de alta duração de 0.3mm |
2 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Diamond Cutting Discs |
1 x | Edge cutter with pin 6.4mm |
2 x | Corundum bound cutting disc for LWS |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Broca de alta duração de 2.1mm |
3 x | Corundum fan sander for LWS |
1 x | Wolfram vanadium steel milling bits |
2 x | Collet Set for accurate use on round components |
2 x | Broca de alta duração de 2.4mm |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Wood Lathe DB450 |
3 x | broca de alta duração de 0,2mm |
1 x | Cups brushes |
1 x | Diamond Cutting Discs |
1 x | Tungsten carbide drills Ø1mm |
1 x | Fibre-Cut Discs |
2 x | Cotton polishers |
1 x | surface planing and thicknessing ADH 250 |
2 x | Backing disc for LWS |
1 x | Wheels brushes |
1 x | Broca de alta duração de 0.7mm |
1 x | |
1 x | Tungsten carbide cutter 1.0mm |
2 x | Precision steel vice PM 40 |
1 x | Corundum fan sander for LWS |
1 x | Brass brushes |
1 x | Fibre-Cut Discs |
2 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
2 x | Slot cutter 6.5mm |
1 x | Flexible silicon discs |
1 x | Flap Wheels |
1 x | Super-fine sanding discs grain 000 |
1 x | Sanding fleece for LWS |
1 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | Sanding Drums |
1 x | Diamond Grinding Bits 1,8mm |
2 x | Broca de alta duração de 1.3mm |
2 x | Hot wire cutter THERMOCUT 12/E |
2 x | Vacum SAA 901 |
2 x | Broca de ponto 5.00 x 2.00 |
1 x | MICROMOT Mains Adapter NG 2/S |
1 x | Solid carbide stylus for engraving |
1 x | Cone shaped milling cutter |
1 x | Fluted filter for CW-matic |
1 x | Diamond Cutting Discs |
1 x | Gear Chuck |
2 x | Professional set for finish grinding and polishing |
1 x | Half round cutter 13mm |
2 x | Machine Vice MS 4 |
1 x | Wolfram vanadium steel milling bits |
1 x | Broca de alta duração de 2.2mm |
2 x | Tool holder for rotary tools |
1 x | Ball-shaped diamond coated 3.2mm |
1 x | MICROMOT Mains Adapter NG 5/E |
2 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
2 x | Broca de alta duração de 0.9mm |
1 x | Broca de alta duração de 2.0mm |
1 x | Replacement cutting disc for MICRO cutter MIC |
1 x | Slot cutter 3.2mm |
1 x | Sanding Discs |
2 x | Tungsten carbide drills Ø1,5mm |
2 x | Thicknesser DH 40 |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Multiform grindstone |
1 x | Flexible silicon discs |
1 x | Tungsten carbide drills Ø2mm |
1 x | Core box bit 3.2mm |
1 x | Felt polishers |
1 x | surface planing and thicknessing ADH 200 |
1 x | 2-speed scroll saw DSH |
1 x | Fibre-Cut Discs |
2 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
1 x | MICRO woodturning lathe DB 250 |
1 x | Fibre-Cut Discs |
1 x | Broca de alta duração de 1.0mm |
1 x | Tungstein carbide rasp - and cutting disc |
1 x | Broca de alta duração de 3.0mm |
1 x | HSS twist drill set with centring pin |
1 x | Slot cutter 5.0mm |
1 x | Super jig saw STS/E |
1 x | HSS drill bits 1.0mm |
1 x | Cotton polishers |
1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
1 x | Corundum grinding disc for LWS |
1 x | Broca de ponto 6.30 x 2.50 |
1 x | Sanding pads for OZI 220/E grit 240 |
1 x | HSS twist drill set to DIN 338 |
1 x | HSS drill bits 1.6mm |
1 x | Broca de ponto 8.00 x 3.15 |
1 x | MICRO Band Saw MBS 240/E |
1 x | Broca de alta duração de 2.9mm |
1 x | Professional polishing sponge |
1 x | Surface planer AH 80 |
1 x | Broca de alta duração de 0.8mm |
1 x | Scroll saw DS 230/E |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Ball-shaped diamond coated 1.2mm |
1 x | Diamond-coated cutting disc for MIC |
1 x | Bench Circular Saw KS 230 |
|
€12,398.95 |