| 4 x | Conjunto de três brocas de ponto |
| 2 x | Broca de ponto 3.15 x 1.00 |
| 1 x | Backing disc for LWS |
| 3 x | SCLCR1010E06 |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Router base OFV |
| 1 x | Super-Cut |
| 1 x | Dividing attachment TA 230 for PF 250 |
| 1 x | MICROMOT tool holder |
| 1 x | Diamond-coated cutting and roughing disc |
| 1 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 2 x | TCMT090204 |
| 2 x | Broca de ponto 3.15 x 1.25 |
| 1 x | Polishing felt, medium hard |
| 1 x | MICROMOT 230/E |
| 1 x | Chuck for TBM 220 |
| 1 x | Mill/Drill Unit BFB 2000. |
| 2 x | Broca de ponto 8.00 x 3.15 |
| 1 x | Broca de ponto 6.30 x 2.50 |
| 1 x | Super-fine sanding discs grain 400 |
| 1 x | Micro Compound Table KT 70 |
| 1 x | Diamond-coated cutting disc for MIC |
| 1 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 1 x | Engraving tool GG |
| 2 x | Glass fibre contact cleaner brush |
| 1 x | Three-jaw steel drill chuck |
| 3 x | Tungsten carbide cutters set |
| 1 x | Disc cutters |
| 1 x | Tungsten carbide cutter 3.0mm |
| 1 x | Turning inserts VCMT070204 |
| 1 x | Edge cutter with pin 6.4mm |
| 1 x | Diamond Grinding Bits 1,8mm |
| 1 x | Sanding Drums |
| 1 x | Fibre-Cut Discs |
| 4 x | Insert CCGT060202-AK |
| 2 x | Wood Lathe DB450 |
| 1 x | Diamond Grinding Bits 5mm |
| 1 x | Sanding bands 14x13mm |
| 1 x | centrically clamping 125mm |
| 1 x | Diamond Grinding Bits 1,8mm |
| 1 x | Boring Bar for CCMT 8mm |
| 1 x | Rebating cutter 6.4mm |
| 1 x | HSS drill bits 0.8mm |
| 1 x | Combi cutter 6.5/2.5mm |
| 3 x | Snipe nose pliers 45º EUROline-Conductive |
| 1 x | Solid carbide stylus for engraving |
| 1 x | Tungsten carbide drills Ø1,5mm |
| 1 x | Set of precision cutters |
| 2 x | Hot wire cutter THERMOCUT 230/E |
| 2 x | DCMT070204 |
| 1 x | Cylinder shaped milling cutters |
| 1 x | Band knife of hardened spring band steel (without teeth) |
| 5 x | Warding files set, 6pcs |
| 3 x | HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI |
| 1 x | Three jaw chuck for the lathe DB 250 |
| 4 x | FLUX-OFF 400ml |
| 2 x | Diamond Cutting Discs |
| 1 x | Fibre-Cut Discs |
| 1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
| 1 x | Fibre-Cut Discs |
| 3 x | sclcr2525M12 |
| 1 x | 10-piece wood router cutter set |
| 1 x | Turning inserts CCMT09T304 |
| 1 x | Sanding Drums |
| 1 x | HSS twist drill set with centring pin |
| 1 x | Five piece HSS chisel set |
| 1 x | Ball-shaped diamond coated 2.2mm |
| 1 x | Flat nose pliers 165mm |
| 2 x | End milling cutter kit HSS 12 pcs |
| 1 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
| 1 x | Fibre-Cut Discs |
| 2 x | Diamond Cutting Discs |
| 1 x | Nylon Fleece Brushes |
| 1 x | Sanding Drums |
| 1 x | SCMT060204 |
| 1 x | Diamond Twist Drills |
| 1 x | 3-jaw chuck centrically clamping 80mm |
| 1 x | HSS drill bits 1.0mm |
| 1 x | centrically clamping 100mm |
| 5 x | VIDEOCLEAN 200ml |
| 1 x | TCMT110204 |
| 1 x | 4-jaw chuck individually clamping 125mm |
| 1 x | Core box bit 3.2mm |
| 2 x | Diamond Cutting Discs |
| 1 x | Fibre-Cut Discs |
| 1 x | 4-jaw chuck individually clamping 80mm |
| 1 x | Flame shaped milling cutters |
| 1 x | Sanding Drums |
| 1 x | Glass fibre contact cleaner brush |
| 1 x | Cutting tool 8 mm |
| 1 x | Boring Bar for DCMT 10mm |
| 1 x | Slot cutter 5.0mm |
| 1 x | Tungsten carbide drills Ø2mm |
| 5 x | BeeHive208S |
| 1 x | Diamond blade for MBS 240/E |
| 1 x | 3-jaw chuck centrically clamping 125mm |
| 1 x | Threading inserts 60º |
| 1 x | Sanding Discs |
| 1 x | 3-jaw chuck centrically clamping 100mm |
| 1 x | Slot cutter 3.2mm |
| 1 x | Turning inserts CCMT060204 |
| 1 x | Flap Wheels |
| 1 x | Blade guides separately |
| 1 x | Cylindrical cutters |
| 1 x | Sanding Discs |
| 4 x | End side cutters 45º EUROline-Conductive |
| 1 x | HSS drill bits 1.6mm |
| 1 x | HSS drill bits 0.5mm |
| 1 x | SCMT09T304 |
| 1 x | Cutting tool 16 mm |
| 1 x | Turning inserts SCMT09T304 |
| 1 x | Sanding bands 14x13mm |
| 1 x | Rounding over cutter 6.4mm |
| 3 x | DEGRESER 200ml |
| 1 x | Insert LGTN-2 |
| 1 x | CM2 - B16 - M10 |
| 1 x | HSS drill bits 1.2mm |
| 2 x | Brass contact cleaner brush |
| 1 x | Metal Cutting Blades |
| 1 x | Cutter head for copy and surface milling MT2 |
| 1 x | Cutting tool HM 20 mm |
| 1 x | Digital caliper gauge 300 mm |
| 1 x | Diamond Cutting Discs |
| 1 x | Insert LGTN-3 |
| 3 x | broca de alta duração de 0,2mm |
| 1 x | Cone shaped milling cutter |
| 1 x | 4-jaw chuck individually clamping 100mm |
| 1 x | Turning inserts WCMX050308F |
| 1 x | V-slot cutter 6.5mm |
| 1 x | Wolfram vanadium steel milling bits |
| 2 x | Cutter head for copy and surface milling MT3 |
| 1 x | WCMT050308 |
| 1 x | Cross-recess Screwdrivers Pozidriv 1 |
| 1 x | Solid carbide stylus for engraving |
| 2 x | Round nose pliers 45º EUROline-Conductive |
| 1 x | Independent four jaw chuck for the DB 250 |
| 1 x | Flap Wheels |
| 1 x | Fibre-Cut Discs |
| 1 x | Set of special steel cutters |
| 1 x | Threading inserts 60º |
| 1 x | Diamond Grinding Bits 1mm |
| 1 x | Boring Bar for CCMT |
| 1 x | Ball-shaped diamond coated 1.2mm |
| 1 x | Tungsten carbide drills Ø1mm |
| 1 x | Slot cutter 6.5mm |
| 1 x | Blade for Steel and brass |
| 1 x | Parting tool 10mm |
| 1 x | Half round cutter 13mm |
| 1 x | Cross-recess Screwdrivers Pozidriv 2 |
| 1 x | Cutting tool 10 mm |
| 2 x | CD-CLEANER 200ml |
| 1 x | Ball-shaped diamond coated 3.2mm |
| 1 x | Angle cutter 45 ° |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 1 x | End side cutters EUROline-Conductive |
| 1 x | Wolfram vanadium steel milling bits |
| 1 x | Tungsten carbide cutter 2.0mm |
| 1 x | Blade for Wood and Plastics |
| 1 x | Dial gauge |
| 1 x | Bandsaw blade of bimetal for MBS 240/E |
| 1 x | Threading inserts 60º |
| 1 x | 3-jaw chuck centrically clamping 160mm |
| 1 x | Ball shaped milling cutters |
| 1 x | Tungsten carbide cutter 1.0mm |
| 1 x | End milling cutter kit HSS 20 pcs |
| 2 x | Milling cutter set (2 - 5mm) |
| 1 x | Steel cups |
| 1 x | Vacum SAA 901 |
| 3 x | Cutting tools of high quality cobalt HSS steel, ground |
| 5 x | Precision lathe PD 250/E |
| 1 x | MICRO Miller MF 70 |
| 1 x | Socket Wrenches 3.0 |
| 1 x | TU 2404 |
| 1 x | High quality corundum grinding bits |
| 1 x | Cotton polishers |
| 5 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
| 1 x | ESD-handling set |
| 1 x | Stainless steel cups |
| 1 x | TORX-screwdrivers T7 |
| 1 x | TORX-screwdrivers T6 |
| 1 x | TORX-screwdrivers T9 |
| 1 x | End mill for aluminium 4mm |
| 1 x | Flexible silicon discs |
| 1 x | Cross-recess Screwdrivers 1 |
| 1 x | Flexible silicon discs |
| 1 x | Cotton polishers |
| 1 x | TORX-screwdrivers T10 |
| 1 x | Socket Wrenches 2.0 |
| 1 x | BIT-SET |
| 1 x | EUROline-Conductive set of pliers |
| 2 x | BeeHive204 |
| 1 x | High quality corundum grinding bits |
| 1 x | End mill for aluminium 3mm |
| 1 x | Cross-recess Screwdrivers 000 |
| 1 x | Wrench Keys 0.7 |
| 1 x | Table Sawr TKS 315 E |
| 1 x | High quality corundum grinding bits |
| 1 x | EUROline snipe nose pliers |
| 1 x | TORX-screwdrivers T8 |
| 1 x | Wrench Keys 2.0 |
| 1 x | Brass brushes |
| 3 x | magnetic base 80kg |
| 1 x | TORX-screwdrivers T4 |
| 1 x | Socket Wrenches 5.5 |
| 1 x | TORX-screwdrivers T20 |
| 2 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | High quality corundum grinding bits |
| 1 x | Cups brushes |
| 1 x | Three piece thread cutting set |
| 1 x | TUNER 200ml |
| 1 x | Cross-recess Screwdrivers 2 |
| 1 x | Wrench Keys 0.9 |
| 1 x | Wrench Keys 1.5 |
| 1 x | Cross-recess Screwdrivers 1 |
| 1 x | High quality corundum grinding bits |
| 2 x | HSS boring tool set, 6 pieces |
| 1 x | Socket Wrenches 1.5 |
| 1 x | Wood Lathe DB900 |
| 1 x | Flexible polishing pad set |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | Wrench Keys 1.3 |
| 1 x | Wrench Keys 2.5 |
| 1 x | High quality corundum grinding bits |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | Cross-recess Screwdrivers 0 |
| 1 x | surface planing and thicknessing ADH 250 |
| 1 x | Flexible polishing pad set |
| 1 x | ROTARY COAXIAL CABLE STRIPPER 3-STEPS |
| 1 x | 6-piece screwdriver and cross-recess set |
| 1 x | DCGT 070202F-AL |
| 1 x | Motor-driven carving device MSG |
| 1 x | Insulation Resistance Tester MG500 |
| 1 x | 6-piece TORX-screwdriver-set |
| 1 x | Super jig saw STS/E |
| 2 x | TORQUE-SCREWDRIVER 1.5 - 4.0 Nm |
| 1 x | Handy 1515 |
| 3 x | Lathe System PD 400 |
| 1 x | MICRO Band Saw MBS 240/E |
| 1 x | PLCC Puller |
| 1 x | MICRO shaper MP 400 |
| 1 x | TIP SPT-2 |
| 1 x | EUROline mini side cutter |
| 1 x | TORX-screwdrivers T10 |
| 1 x | Polishing paste |
| 1 x | Table Saw TKS 2500 SC |
| 1 x | Cross-recess Screwdrivers 00 |
| 1 x | Cross-recess Screwdrivers 2 |
| 1 x | End mill for aluminium 6mm |
| 1 x | Cotton polishers |
| 1 x | Hot wire cutter THERMOCUT 650 |
| 1 x | Felt polishers |
| 1 x | Stainless steel brushes |
| 1 x | Felt polishers |
| 1 x | Flexible silicon discs |
| 1 x | Felt polishers |
 |
| €68,759.87 |
