1 x | Universal polishing paste |
5 x | MICRO Miller MF 70 |
1 x | Hot wire cutter THERMOCUT 230/E |
1 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
1 x | IT 150 - Indirect dividing attachment |
2 x | MICRO Miller FF 500 |
5 x | Precision Vice FMZ |
1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | Blade guides separately |
2 x | Diamond Grinding Bits 1,8mm |
1 x | ESD Tweezers 5-195 |
3 x | Microfibre cloth |
2 x | Professional set for finish grinding and polishing |
1 x | Steel tape measure |
1 x | FLUX DISPENSING PEN, LEAD FREE |
2 x | MICRO Miller FF 230 |
1 x | MICROMOT Mains Adapter NG 5/E |
1 x | Flexible silicon discs |
1 x | Grinding mop cylinder grit 120 |
1 x | Diamond Grinding Bits 1mm |
1 x | ESD Tweezers 5-193 |
1 x | Ceramic-tipped tweezers and ESD 5-096 |
1 x | V-slot cutter 6.5mm |
2 x | Super-fine sanding discs grain 000 |
4 x | Backing disc for LWS |
1 x | SMD Tweezers 5-058 |
1 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
1 x | Lambswool polishing disc |
4 x | Precision steel vice PM 40 |
3 x | Broca de ponto 3.15 x 1.00 |
1 x | Diamond Grinding Bits 1,8mm |
1 x | Edge cutter with pin 6.4mm |
1 x | Super-fine sanding discs grain 400 |
1 x | Engraving tool GG |
1 x | Diamond blade for MBS 240/E |
2 x | MICROMOT 230/E |
2 x | Cotton polishers |
1 x | Stainless steel cups |
2 x | sanding belts for BBS/s Grit 80 |
1 x | Ceramic tweezers 5-081 |
1 x | Brass brushes |
1 x | sanding belts for BBS/s Grit 150 |
1 x | Multipurpose Vices Primus100 |
2 x | Super-fine sanding discs grain 2000 |
1 x | Ceramic-tipped tweezers and ESD 5-095 |
1 x | Antiallergical Tweezers 5-155-1 |
1 x | 10-piece wood router cutter set |
1 x | Tweezer teflon-coated 5-021-9 |
1 x | Wheels brushes |
1 x | SMD Tweezers 5-053 |
3 x | Felt polishers |
1 x | DIL44/MLF44-1 ZIF-CS |
3 x | Replacement cutting disc for MICRO cutter MIC |
2 x | Safety Insulated Phillips Screwdriver 14-632VDE |
4 x | Machine Vice MS 4 |
2 x | Bench drill machine TBM 220 |
1 x | Long neck straight drill/grinder LB/E |
2 x | Safety Insulated Phillips Screwdriver 14-631VDE |
1 x | Precision Vice FMS 75 |
1 x | Diamond Grinding Bits 5mm |
1 x | Felt polishers |
2 x | Insulation Resistance Tester MG125 |
1 x | Diamond cutting blade for OZI |
1 x | Tungstein carbide rasp - and cutting disc |
2 x | Grinding mop cylinder grit 80 |
1 x | Glass fibre contact cleaner brush |
1 x | Earthing module |
1 x | Special Fused Alumina (Hardness N). |
1 x | Footswitch FS |
4 x | Insulation Resistance Tester MG500 |
1 x | DIL40/TQFP64 ZIF CC-1 |
1 x | DIL48/TQFP144 ZIF ST10-1 |
1 x | Broca de alta duração de 1.0mm |
1 x | Wolfram vanadium steel milling bits |
2 x | Grinding mop cylinder grit 240 |
2 x | Sanding pads for OZI 220/E grit 150 |
2 x | Step clamps made of steel |
1 x | Polishing felt, medium hard |
1 x | Sanding pads for OZI 220/E grit 240 |
1 x | Universal holder UHZ |
1 x | Centre Turning Attachment |
1 x | ANTISTATIC 200ml |
1 x | Long neck angle milling/drilling unit LWB 220/E |
1 x | Earth wire |
4 x | Tungsten carbide cutters set |
2 x | Collet Set for accurate use on round components |
1 x | sanding belts for BBS/s Grit 240 |
1 x | Cylinder shaped milling cutters |
1 x | HSS immersion saw blades for OZI |
2 x | Replacement belts for BSL 220/E |
1 x | Router base OFV |
1 x | Super safety and specialty bit set, 75-piece |
1 x | TORQUE-SCREWDRIVER 1.5 - 4.0 Nm |
2 x | Broca de ponto 3.15 x 1.25 |
1 x | IC tweezers |
1 x | Component tweezers 5-006 |
1 x | Disc cutters |
2 x | MICROMOT 50 |
2 x | Diamond blade |
1 x | Precision drill grinder FBS 12/EF |
2 x | Crocodile clip |
1 x | Component tweezers 5-009 |
1 x | Tungsten carbide cutter 1.0mm |
1 x | Cone shaped milling cutter |
1 x | Safety Insulated Phillips Screwdriver 14-633VDE |
1 x | Solid carbide saw blade |
1 x | Multiform grindstone |
1 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
1 x | HSS immersion saw blades for OZI |
2 x | Replacement belts for BSL 220/E |
1 x | EUROline-Conductive set of pliers |
1 x | Multipurpose Vices Primus 75 |
2 x | Broca de alta duração de 2.9mm |
1 x | Steel cups |
2 x | ACCENT SERVICE TOOLS SET |
1 x | Long neck angle grinder LHW |
2 x | Replacement carving blades for MSG |
1 x | Aluminium Die-Cast |
1 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | Radius Cutting Attachment, complete with pointed tool |
1 x | Titan Tweezers 5-031 |
1 x | Grinding mop cylinder grit 120 |
2 x | PLCC Puller |
1 x | Safety Insulated Pozidriv Screwdriver 14-641VDE |
1 x | Tungsten tipped saw blade |
1 x | PVC-insulated tweezers 5-107-6 |
1 x | Fixed Steady |
2 x | Diamond Twist Drills |
1 x | Four Jaw Chuck |
1 x | Set of special steel cutters |
2 x | Diamond-coated cutting disc for MIC |
1 x | Tool holder for rotary tools |
1 x | Ball-shaped diamond coated 1.2mm |
1 x | Compact workshop vacuum cleaner CW-matic |
2 x | Sanding fleece for LWS |
1 x | Professional Drill/Grinder IBS/E |
1 x | SCREEN 200ml |
1 x | Tungsten carbide cutter 2.0mm |
1 x | Side cutters 160mm |
1 x | Round nose pliers 165mm |
1 x | surface planing and thicknessing ADH 200 |
2 x | MICRO woodturning lathe DB 250 |
1 x | 14-piece parallel supports set |
3 x | 2-speed scroll saw DSH |
1 x | Fibre-Cut Discs |
1 x | Diamond Cutting Discs |
1 x | Flexible polishing pad set |
1 x | Wire strippers 165mm |
1 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Nylon Fleece Brushes |
1 x | Saw blade made of high-alloy special steel |
1 x | Sanding Discs |
1 x | Ball-shaped diamond coated 3.2mm |
1 x | Independent four jaw chuck for the DB 250 |
1 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Dividing attachment TA 230 for PF 250 |
1 x | Telephone pliers straight 205mm |
1 x | Combination pliers 190mm |
1 x | Earth wire with dummy Schunko-plug |
1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
1 x | Fibre-Cut Discs |
1 x | Corundum fan sander for LWS |
1 x | Flap Wheels |
1 x | Fine dust paper filter for CW-matic |
1 x | Telephon pliers bent 160mm |
1 x | Protective device for hand-operated MICROMOT |
1 x | Handy 1515 |
2 x | Telephone pliers bent 205mm |
1 x | Flap Wheels |
1 x | Cotton polishers |
1 x | Sanding Drums |
1 x | MICRO shaper MP 400 |
1 x | Polishing paste |
1 x | Combination pliers 210mm |
1 x | Belt sander BBS/S |
1 x | Steel brushes |
1 x | Flat nose pliers 165mm |
1 x | Cutting disc, with reinforcement |
1 x | Side cutters 160mm |
1 x | Fibre-Cut Discs |
1 x | Thicknesser DH 40 |
1 x | High quality corundum grinding bits |
|
€17,730.08 |