1 x | MICRO shaper MP 400 |
3 x | Belt sander BS/E |
1 x | Super-fine sanding discs grain 2000 |
2 x | Blade holders for DS 460 |
1 x | Tungsten carbide cutter 2.0mm |
1 x | Spare cutting wire |
2 x | Replacement cutting wire for the THERMOCUT 12/E |
1 x | Tungsten carbide cutter 3.0mm |
2 x | sandpaper for PS 13 Grot 180 |
2 x | Corundum bound cutting disc for LWS |
2 x | Multipurpose Vices Primus100 |
3 x | Three piece thread cutting set |
2 x | Ball-shaped diamond coated 1.2mm |
2 x | Gear Chuck |
1 x | HSS boring tool set, 6 pieces |
2 x | Tungsten carbide cutters set |
2 x | Thicknesser DH 40 |
2 x | Bench Circular Saw KS 230 |
1 x | Solid carbide saw blade |
3 x | Machine Vice MS 4 |
3 x | Collet Set for accurate use on round components |
1 x | Diamond blade for MBS 240/E |
3 x | HSS immersion saw blades for OZI |
1 x | Motor-driven carving device MSG |
1 x | Engraving tool GG |
3 x | MICROMOT Mains Adapter NG 5/E |
1 x | Blade for Wood and Plastics |
2 x | Lathe System PD 400 |
1 x | Flame shaped milling cutters |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
2 x | Cone shaped milling cutter |
1 x | Band knife of hardened spring band steel (without teeth) |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Sanding pads for OZI 220/E grit 240 |
2 x | Self-adhesive white corundum sanding discs for TG 250/E |
1 x | Ball-shaped diamond coated 2.2mm |
1 x | Diamond Grinding Bits 1,8mm |
2 x | Polishing felt, medium hard |
2 x | MICRO Band Saw MBS 240/E |
1 x | Universal holder UHZ |
3 x | Cutting disc, with reinforcement |
1 x | Coarse-toothed (10 TPI per 25mm) |
1 x | Wolfram vanadium steel milling bits |
1 x | Cylinder shaped milling cutters |
2 x | MICRO cutter MIC |
2 x | Belt sander BBS/S |
2 x | Ball shaped milling cutters |
1 x | Four Jaw Chuck |
1 x | sanding belts for BBS/s Grit 240 |
1 x | Silicon-Carbide. |
3 x | Centre Turning Attachment |
2 x | Multiform grindstone |
1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
2 x | MICROMOT Mains Adapter NG 2/S |
3 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
1 x | Jig saw STS 12/E |
1 x | Complete Engraving Kit with trial glass |
2 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
2 x | Blade for Steel and brass |
1 x | Radius Cutting Attachment, complete with pointed tool |
1 x | Super-fine sanding discs grain 400 |
2 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
2 x | Self-adhesive silicone film for easy sanding disc replacement |
1 x | Saw blade made of high-alloy special steel |
2 x | Corundum fan sander for LWS |
3 x | HSS immersion saw blades for OZI |
3 x | 2-speed scroll saw DSH |
2 x | Bandsaw blade of bimetal for MBS 240/E |
3 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
1 x | Glass fibre contact cleaner brush |
1 x | Disc cutters |
1 x | Diamond blade |
1 x | Cylindrical cutters |
1 x | Ball-shaped diamond coated 3.2mm |
2 x | sanding belts for BBS/s Grit 80 |
2 x | Step clamps made of steel |
1 x | Solid carbide stylus for engraving |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
1 x | Fixed Steady |
1 x | MICRO-screwdrivers |
1 x | Super jig saw STS/E |
1 x | Sanding fleece for LWS |
1 x | Corundum fan sander for LWS |
2 x | Multipurpose Vices Primus 75 |
1 x | Tool holder for rotary tools |
2 x | Coarse-toothed (25 TPI per 25mm) |
1 x | Professional set for finish grinding and polishing |
3 x | Compact workshop vacuum cleaner CW-matic |
1 x | Router base OFV |
3 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
2 x | sandpaper for PS 13 Grit 400 |
2 x | Combi cutter 6.5/2.5mm |
1 x | MICRO Heat gun MH 550 |
1 x | Table Saw FET |
2 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
3 x | Diamond-coated cutting and roughing disc |
2 x | Sanding pads for OZI 220/E grit 80 |
1 x | Precision Vice FMS 75 |
1 x | Supercut jig saw blades of special steel |
2 x | sandpaper for PS 13 Grit 240 |
1 x | Corundum sanding discs for LWS |
2 x | Brass brushes |
1 x | Precision lathe PD 250/E |
1 x | Wolfram vanadium steel milling bits |
1 x | MICRO woodturning lathe DB 250 |
1 x | Brass contact cleaner brush |
1 x | Backing disc for LWS |
1 x | Tungsten Carbide Tipped (TCT) |
1 x | Set of special steel cutters |
1 x | Diamond Grinding Bits 1mm |
1 x | MICROFLAME burner MFB/E |
1 x | Polishing Set |
1 x | Diamond cutting blade for OZI |
3 x | Corundum grinding disc for LWS |
1 x | 10-piece wood router cutter set |
2 x | Sanding fleece for LWS |
1 x | Tungsten carbide cutter 1.0mm |
2 x | Grinding and Polishing Machine SP/E |
1 x | DIL40/TQFP44 ZIF AWM-1 |
1 x | DIL48/SSOP56 ZIF Flash-1 |
1 x | Coarse-toothed (18 TPI per 25mm) |
1 x | Disc Sander TG 250/E |
1 x | Long neck angle grinder LHW |
2 x | Sanding pads for OZI 220/E grit 150 |
2 x | Delta sander OZI/E |
1 x | Cotton polishers |
1 x | DIL44/TQFP44-3 ZIF |
2 x | Tungstein carbide rasp - and cutting disc |
1 x | DIL40/TQFP80-1 ZIF AWM-1 |
3 x | Corundum grinding disc for LWS |
1 x | DIL40/TQFP80-1 ZIF PIC-1A |
1 x | DIL40/TQFP64 ZIF AVRmega-2 |
1 x | DIL48/SSOP90 ZIF Flash-1 |
1 x | Felt polishers |
1 x | Fluted filter for CW-matic |
2 x | HSS cutting blade for OZI |
1 x | DIL48/TQFP100-2 ZIF PLD-1 |
1 x | DIL48/TQFP64 ZIF HC908-1 |
1 x | Angle polisher WP/E |
2 x | Polishing machine PM 100 |
1 x | Cotton polishers |
1 x | DIL48/SSOP56 ZIF Flash-3 |
1 x | DIL40/MQFP52 ZIF ADuC812 |
1 x | DIL24/QSOP24 ZIF 150mil |
1 x | High quality corundum grinding bits |
2 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
1 x | Hot wire cutter THERMOCUT 650 |
1 x | Cylinder sander WAS/E |
1 x | Wire strippers 165mm |
1 x | DIL40/TQFP44 ZIF EM652X |
2 x | Disc Sander TG 125/E |
1 x | Milling cutter set (6 - 10mm) |
1 x | DIL44/TQFP44-1 Zif |
1 x | Felt polishers |
1 x | Spiral blade. 125mm long with plain ends (without pins). |
1 x | High quality corundum grinding bits |
1 x | DIL48/TQFP144 ZIF ST10-1 |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | DIL48/TQFP100 ZIF PLD-2 |
1 x | DIL32/MLF32-1 ZIF |
1 x | High quality corundum grinding bits |
1 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
1 x | EPROM/Flash-PLCC32-2-DIL32 socket submodule |
1 x | DIL40/MLF64 ZIF-CS AVR-1 |
1 x | DIL40/TQFP64 ZIF EM652X |
1 x | Footswitch FS |
1 x | Flap Wheels |
1 x | DIL48/SSOP70 ZIF OKI-1 |
1 x | DIL40/TQFP44 ZIF PIC-1 |
1 x | High quality corundum grinding bits |
1 x | Micro Compound Table KT 70 |
1 x | DIL40/TQFP52 ZIF EM652X |
1 x | DIL34/SSOP34 ZIF 200 mil |
1 x | Self-adhesive white corundum sanding discs for TG 125/E |
1 x | Felt polishers |
1 x | DIL34/SSOP34-1 ZIF-CS |
1 x | DIL48/TQFP100 ZIF ST92Fxxx |
1 x | IC Test clip 20 pins |
1 x | Safety insulated screwdrivers 14-603 VDE |
1 x | Safety insulated screwdrivers 14-601 VDE |
2 x | Cut off/mitre saw KGS 80 |
1 x | Lever Dial Indicator |
2 x | sanding belts for BBS/s Grit 150 |
1 x | Digital caliper gauge 300 mm |
1 x | Side cutters 180mm |
1 x | Felt polishers |
1 x | MICROMOT steel collet set |
1 x | Telephon pliers straight 160mm |
1 x | Half round cutter 13mm |
1 x | Felt cloth polishing disc (100 x 15mm) |
1 x | OPTI BF16 Vario |
1 x | Safety insulated screwdrivers 14-606 VDE |
1 x | 4-jaw chuck individually clamping 100mm |
1 x | OPTI BF20L VARIO |
1 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
2 x | TORQUE-SCREWDRIVER 1.5 - 4.0 Nm |
1 x | Three jaw chuck for the lathe DB 250 |
1 x | Super safety and specialty bit set, 75-piece |
1 x | Slot cutter 5.0mm |
1 x | Dividing attachment TA 230 for PF 250 |
1 x | Telephon pliers straight 200mm |
1 x | End milling cutter kit HSS 20 pcs |
1 x | precision machine vices FMS150 |
1 x | Scroll saw DS 230/E |
1 x | Safety Insulated Pozidriv Screwdriver 14-644VDE |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Combination pliers 205mm |
1 x | CM2 - B16 - M10 |
1 x | V-slot cutter 6.5mm |
1 x | Dial gauge |
1 x | Wire strippers 160mm |
1 x | Replacement belts for BSL 220/E |
1 x | Hand magnifier with LED light 3X |
1 x | Precision quick-action drill chuck 0-16mm B16 |
1 x | 4-jaw chuck individually clamping 125mm |
1 x | Rebating cutter 6.4mm |
|
€26,225.96 |