| 1 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 1 x | Corundum fan sander for LWS |
| 1 x | Long neck angle milling/drilling unit LWB 220/E |
| 1 x | Precision drill grinder FBS 12/EF |
| 1 x | Universal and oil siphoning pump AP 12 |
| 1 x | Hot wire cutter THERMOCUT 650 |
| 1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 2 x | MICRO Miller MF 70 |
| 1 x | Sanding fleece for LWS |
| 1 x | Lathe System PD 400 |
| 1 x | Super safety and specialty bit set, 75-piece |
| 1 x | Disc Sander TG 250/E |
| 1 x | Hot wire cutter THERMOCUT 12/E |
| 1 x | Coarse-toothed (18 TPI per 25mm) |
| 1 x | MICROMOT 50/EF |
| 2 x | Tungsten Carbide Tipped (TCT) |
| 1 x | Felt cloth polishing disc (100 x 15mm) |
| 1 x | Backing disc for LWS |
| 1 x | Corundum grinding disc for LWS |
| 1 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 2 x | Microfibre polishing wheel, 15-ply (100mm) |
| 1 x | Replacement belts for BSL 220/E |
| 1 x | Professional Drill/Grinder IBS/E |
| 1 x | Disc Sander TG 125/E |
| 1 x | Dividing attachment TA 230 for PF 250 |
| 1 x | MICROMOT 50/E |
| 1 x | HSS boring tool set, 6 pieces |
| 1 x | Bench drill machine TBM 220 |
| 1 x | Engraving tool GG |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Tungstein carbide rasp - and cutting disc |
| 1 x | Bench drill press TBH |
| 1 x | Compact workshop vacuum cleaner CW-matic |
| 1 x | Diamond blade |
| 1 x | Precision lathe PD 250/E |
| 2 x | MICRO Miller FF 500 |
| 1 x | Blade holders for DS 460 |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 1 x | Saw blade made of high-alloy special steel |
| 1 x | MICROMOT Mains Adapter NG 2/S |
| 1 x | Precision Drill/Grinder FBS 240/E |
| 1 x | Coarse-toothed (25 TPI per 25mm) |
| 1 x | Mill/Drill System BFW 40/E |
| 1 x | Corundum bound cutting disc for LWS |
| 1 x | MICROMOT 50 |
| 1 x | Three-jaw steel drill chuck |
| 1 x | Three piece thread cutting set |
| 1 x | Coarse-toothed (10 TPI per 25mm) |
| 1 x | Diamond-coated cutting disc for MIC |
| 1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
| 1 x | Step clamps made of steel |
| 1 x | MICROMOT Mains Adapter NG 2/E |
| 1 x | 10-piece wood router cutter set |
| 1 x | Blade guides separately |
| 1 x | Five piece HSS chisel set |
| 1 x | Slot cutter 6.5mm |
| 1 x | Four Jaw Chuck |
| 1 x | Jig saw STS 12/E |
| 1 x | Bandsaw blade of bimetal for MBS 240/E |
| 1 x | HSS immersion saw blades for OZI |
| 1 x | Footswitch FS |
| 1 x | 2-speed scroll saw DSH |
| 2 x | Inpection mirror 1-978 |
| 2 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
| 2 x | Glass fibre contact cleaner brush |
| 1 x | Table Saw FET |
| 1 x | Half round cutter 13mm |
| 1 x | sanding belts for BBS/s Grit 80 |
| 1 x | Diamond blade for MBS 240/E |
| 1 x | Centre Turning Attachment |
| 1 x | Rebating cutter 6.4mm |
| 1 x | Rounding over cutter 6.4mm |
| 1 x | Super jig saw STS/E |
| 1 x | Fine dust paper filter for CW-matic |
| 1 x | MICRO cutter MIC |
| 1 x | Sanding pads for OZI 220/E grit 240 |
| 1 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
| 1 x | Cut off/mitre saw KGS 80 |
| 1 x | Surface planer AH 80 |
| 1 x | Radius Cutting Attachment, complete with pointed tool |
| 1 x | Blade for Wood and Plastics |
| 1 x | Core box bit 3.2mm |
| 1 x | Angle cutter 45 ° |
| 1 x | Spare cutting wire |
| 1 x | Fluted filter for CW-matic |
| 1 x | Slot cutter 5.0mm |
| 1 x | Drill chuck with sliding sleeve for the tailstock |
| 1 x | Sanding pads for OZI 220/E grit 150 |
| 1 x | Collet Set for accurate use on round components |
| 2 x | Cutting disc, with reinforcement |
| 1 x | Three jaw chuck for the lathe DB 250 |
| 1 x | HSS cutting blade for OZI |
| 1 x | HSS immersion saw blades for OZI |
| 2 x | Precision caliper square |
| 1 x | Telephon pliers straight 200mm |
| 2 x | IC Test clip 20 pins |
| 1 x | PROLUB 200ml |
| 2 x | Insulation Resistance Tester MG500 |
| 1 x | Precision magnetic gauge stand |
| 1 x | SPRAYFLON 200ml |
| 1 x | Combination pliers 160mm |
| 1 x | TORQUE-SCREWDRIVER 1.5 - 4.0 Nm |
| 1 x | DEGRESER 200ml |
| 1 x | POLISHER 200ml |
| 2 x | Handy 1515 |
| 1 x | Digital caliper gauge 300 mm |
| 1 x | VIDEOCLEAN 200ml |
| 1 x | ANTISTATIC 200ml |
| 1 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
| 1 x | FLUX-OFF 400ml |
| 2 x | CRIMPING PLIERS/WIRE STRIPPER |
| 2 x | Steel tape measure |
| 1 x | Combination pliers 185mm |
| 1 x | FREEZER-BR 200ml |
| 1 x | Round nose pliers 160mm |
| 2 x | Pinça SOIC de 8 pinos |
| 2 x | Magnetic base |
| 1 x | Combination pliers 205mm |
| 1 x | Insulation Resistance Tester MG125 |
| 1 x | TOP-PIN 200ml |
| 1 x | Dial gauge |
| 1 x | PROTECTION 200ml |
| 3 x | CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C |
| 1 x | SCREEN 200ml |
| 1 x | SILICONE 200ml |
| 2 x | magnetic base 80kg |
| 2 x | ROTARY COAXIAL CABLE STRIPPER 3-STEPS |
| 2 x | Warding files set, 6pcs |
| 1 x | MICROFLAM gas soldering set MGS |
| 1 x | Broca de alta duração de 2.4mm |
| 1 x | Wood Lathe DB900 |
| 1 x | surface planing and thicknessing ADH 250 |
| 2 x | STRIPPING TOOL WITH ADJUSTABLE KNIVES |
| 1 x | Broca de alta duração de 0.7mm |
| 1 x | Broca de ponto 6.30 x 2.50 |
| 1 x | Broca de ponto 5.00 x 2.00 |
| 1 x | Router base OFV |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | Contact bracelet with spiral cord |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 1 x | Broca de alta duração de 1.0mm |
| 1 x | ACCENT SERVICE TOOLS SET |
| 1 x | Precision caliper 500mm |
| 1 x | Broca de alta duração de 1.3mm |
| 1 x | Broca de alta duração de 0.4mm |
| 1 x | Broca de alta duração de 2.3mm |
| 1 x | Lathe tools 10mm pastilhados |
| 1 x | Broca de alta duração de 0.3mm |
| 1 x | Broca de ponto 3.15 x 1.00 |
| 1 x | surface planing and thicknessing ADH 200 |
| 1 x | Flat nose pliers 45º EUROline-Conductive |
| 1 x | Inspector mirror |
| 1 x | Snipe nose pliers 45º EUROline-Conductive |
| 1 x | EUROline-Conductive set of pliers |
| 1 x | Broca de alta duração de 1.4mm |
| 1 x | End side cutters EUROline-Conductive |
| 1 x | Earthing module |
| 1 x | Broca de alta duração de 2.5mm |
| 1 x | Hand magnifier with LED light 3X |
| 1 x | 6pcs Double Open End wrench set |
| 1 x | Earth wire |
| 1 x | Chuck for TBM 220 |
| 1 x | Crimping plier for BNC |
| 1 x | Earth wire with dummy Schunko-plug |
| 1 x | Wood Lathe DB450 |
| 1 x | broca de alta duração de 0,2mm |
| 1 x | Mini side cutters EUROline-Conductive |
| 1 x | sanding belts for BBS/s Grit 150 |
| 1 x | Earth wire |
| 1 x | End side cutters 45º EUROline-Conductive |
| 1 x | Diamond-coated cutting and roughing disc |
| 1 x | Cylinder sander WAS/E |
| 1 x | MICRO Miller FF 230 |
| 1 x | Grinding mop cylinder grit 80 |
| 1 x | Grinding mop cylinder grit 120 |
| 1 x | Corundum fan sander for LWS |
 |
| €18,840.93 |
