Band Saw Blades

There are no products available in this category.

Manufacturers
2 x Five piece HSS chisel set
2 x Blade for Steel and brass
4 x Precision caliper 500mm
3 x Three-jaw steel drill chuck
3 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
8 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x Mini side cutters EUROline-Conductive
5 x Insulation Resistance Tester MG500
2 x Backing disc for LWS
1 x Jig saw blades made of HSS
1 x Lambswool polishing disc
2 x Round nose pliers 45º EUROline-Conductive
3 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
3 x Magnetic base
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Brass contact cleaner brush
5 x Mini side cutters EUROline-Conductive
2 x End side cutters EUROline-Conductive
3 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
3 x PLCC Extractor
2 x Dial gauge
2 x Flat nose pliers 45º EUROline-Conductive
1 x Professional polishing sponge
2 x Glass fibre contact cleaner brush
2 x Snipe nose pliers 45º EUROline-Conductive
4 x Insulation Resistance Tester MG125
2 x Precision caliper square
2 x Polishing felt, medium hard
1 x Supercut jig saw blades of special steel
1 x Wrench Keys 0.7
1 x Fluted filter for CW-matic
2 x Spiral blade. 125mm long with plain ends (without pins).
1 x Super-fine sanding discs grain 400
3 x Table Sawr TKS 315 E
2 x IC tweezers
8 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Flexible silicon discs
2 x Lever Dial Indicator
1 x Corundum fan sander for LWS
2 x Coarse-toothed (10 TPI per 25mm)
2 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x ESD-handling ser 9-361
1 x Super-fine sanding discs grain 000
1 x Precision magnetic gauge stand
1 x Super-fine sanding discs grain 2000
1 x Lathe tools 8mm pastilhados
1 x Diamond-coated cutting disc for MIC
1 x Professional set for finish grinding and polishing
3 x magnetic base 80kg
2 x Digital caliper gauge 300 mm
1 x Coarse-toothed (25 TPI per 25mm)
2 x Vacum SAA 901
1 x lathe tools 10mm
1 x Wrench Keys 1.5
3 x Glass fibre contact cleaner brush
2 x Blade holders for DS 460
4 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
3 x Belt sander BBS/S
2 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
2 x MICRO Screwdriver MIS 1. Complete with 16 inserts.
2 x MICROMOT Mains Adapter NG 2/S
2 x MICROFLAME burner MFB/E
4 x MICRO Heat gun MH 550
2 x Universal holder UHZ
2 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x Three jaw chuck for the lathe DB 250
2 x STRIPPING TOOL WITH ADJUSTABLE KNIVES
2 x PLCC Puller
3 x MICROFLAM gas soldering set MGS
1 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x Engraving tool GG
2 x MICRO-screwdrivers
2 x Precision lathe PD 250/E
2 x Coarse-toothed (18 TPI per 25mm)
2 x Router base OFV
1 x BIT-SET
1 x EUROline-Conductive set of pliers
2 x Solid carbide saw blade
1 x Grinding and Polishing Machine SP/E
2 x Crimping plier for BNC
2 x Disc Sander TG 125/E
3 x Band knife of hardened spring band steel (without teeth)
3 x Precision steel vice PM 40
2 x Cups brushes
2 x Crosscut 'Super-Cut' blade
1 x HSS twist drill set to DIN 338
2 x CRIMPING PLIERS/WIRE STRIPPER
1 x Diamond Coated
1 x Super-Cut
1 x BeeHive208S
1 x Fibre-Cut Discs
2 x Flap Wheels
2 x Machine Vice MS 4
2 x Diamond blade
1 x Angle polisher WP/E
1 x Corundum grinding disc for LWS
2 x Tungsten Carbide Tipped (TCT)
2 x Delta sander OZI/E
1 x Safety Insulated Phillips Screwdriver 14-631VDE
1 x Flap Wheels
1 x Compact workshop vacuum cleaner CW-matic
1 x HSS drill bits 1.6mm
2 x Cylinder sander WAS/E
2 x Diamond blade for MBS 240/E
2 x Long neck angle grinder LHW
1 x Table Saw TKS 2500 SC
1 x Disc cutters
1 x Grinding mop cylinder grit 80
1 x Conjunto de três brocas de ponto
1 x Diamond Cutting Discs
1 x IC Test clip 20 pins
1 x Flexible silicon discs
1 x Tungsten carbide drills Ø1mm
1 x Stainless steel cups
2 x HSS boring tool set, 6 pieces
2 x Disc Sander TG 250/E
1 x Fibre-Cut Discs
1 x Grinding mop cylinder grit 120
2 x Multipurpose Vices Primus100
1 x Four Jaw Chuck
1 x Precision Vice FMZ
1 x Diamond Grinding Bits 1,8mm
1 x Polishing machine PM 100
2 x Complete Engraving Kit with trial glass
1 x Felt polishers
1 x Mill/Drill System BFW 40/E
3 x Cutting tools of high quality cobalt HSS steel, ground
1 x Corundum sanding discs for LWS
1 x Felt polishers
1 x High quality corundum grinding bits
1 x EUROline flat nose pliers
2 x Multipurpose Vices Primus 75
1 x Felt polishers
1 x Tool holder for rotary tools
1 x PROLUB 200ml
1 x EUROline mini side cutter
1 x Sanding bands 14x13mm
1 x EUROline round nose pliers
3 x Wood Lathe DB900
1 x 6-piece TORX-screwdriver-set ESD
1 x Edge cutter with pin 6.4mm
1 x High quality corundum grinding bits
1 x Wolfram vanadium steel milling bits
1 x Lathe System PD 400
1 x Centre Turning Attachment
2 x EUROline end cutter
1 x Aluminium Die-Cast
1 x Corundum sanding discs for LWS
1 x Blade guides separately
1 x Radius Cutting Attachment, complete with pointed tool
1 x Broca de ponto 3.15 x 1.25
1 x Steel wheels
1 x Sanding bands 14x13mm
1 x Ball-shaped diamond coated 2.2mm
1 x EUROline mini side cutter
1 x sanding belts for BBS/s Grit 80
1 x 2-speed scroll saw DSH
1 x Nylon Fleece Brushes
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x Collet Set for accurate use on round components
1 x Universal and oil siphoning pump AP 12
1 x 6-piece screwdriver and cross-recess set ESD
1 x High quality corundum grinding bits
1 x Tungsten carbide cutter 3.0mm
1 x Tungsten tipped saw blade
1 x 6-piece socket wrenches ESD
1 x Step clamps made of steel
1 x Wood Lathe DB450
1 x Fibre-Cut Discs
€29,877.45
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Languages
Portugues English