| 4 x | Jig saw STS 12/E |
| 4 x | Corundum grinding disc for LWS |
| 4 x | Precision steel vice PM 40 |
| 3 x | |
| 2 x | Fibre-Cut Discs |
| 2 x | High quality corundum grinding bits |
| 1 x | Broca de alta duração de 1.3mm |
| 4 x | Dividing attachment TA 230 for PF 250 |
| 2 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 4 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
| 4 x | Protective device for hand-operated MICROMOT |
| 1 x | MICRO shaper MP 400 |
| 4 x | Table Saw FET |
| 1 x | Set of special steel cutters |
| 3 x | Spare cutting wire |
| 3 x | Polishing machine PM 100 |
| 3 x | Polishing Set |
| 4 x | MICROMOT extension cord. 300cm. |
| 3 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 4 x | Centre Turning Attachment |
| 3 x | Router base OFV |
| 1 x | Broca de alta duração de 0.8mm |
| 2 x | Cotton polishers |
| 3 x | Felt polishers |
| 2 x | Silicon-Carbide. |
| 3 x | Self-adhesive silicone film for easy sanding disc replacement |
| 4 x | Flexishaft MICROMOT 110/BF |
| 2 x | Special Fused Alumina (Hardness N). |
| 5 x | Flexishaft MICROMOT 110/P |
| 1 x | Broca de alta duração de 1.4mm |
| 1 x | Super jig saw STS/E |
| 2 x | 2-speed scroll saw DSH |
| 1 x | Broca de alta duração de 1.1mm |
| 1 x | Bench Circular Saw KS 230 |
| 2 x | CRIMPING PLIERS/WIRE STRIPPER |
| 3 x | MICRO cutter MIC |
| 2 x | Compact workshop vacuum cleaner CW-matic |
| 5 x | Fixed Steady |
| 3 x | Fibre-Cut Discs |
| 3 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 3 x | Self-adhesive silicone carbide sanding discs for TSG 250/E |
| 2 x | Disc Sander TG 250/E |
| 2 x | Felt cloth polishing disc (100 x 15mm) |
| 3 x | Three jaw chuck for the lathe DB 250 |
| 3 x | Felt polishers |
| 2 x | High quality corundum grinding bits |
| 2 x | Flexible silicon discs |
| 2 x | Wheels brushes |
| 1 x | Milling cutter set (6 - 10mm) |
| 2 x | Polishing felt, medium hard |
| 2 x | Microfibre cloth |
| 2 x | Diamond Grinding Bits 1,8mm |
| 4 x | Fluted filter for CW-matic |
| 2 x | MICROFLAME burner MFB/E |
| 2 x | MICRO Miller FF 500 |
| 2 x | Hot wire cutter THERMOCUT 650 |
| 2 x | Coarse-toothed (10 TPI per 25mm) |
| 2 x | Cotton polishers |
| 2 x | Sanding fleece for LWS |
| 5 x | Replacement carving blades for MSG |
| 4 x | Four Jaw Chuck |
| 1 x | BGA-0245/0241 |
| 2 x | Flexible silicon discs |
| 1 x | Conjunto de três brocas de ponto |
| 1 x | Nylon Fleece Brushes |
| 2 x | Rebating cutter 6.4mm |
| 2 x | Spiral blade. 125mm long with plain ends (without pins). |
| 1 x | Universal polishing paste |
| 5 x | Backing disc for LWS |
| 1 x | Cone shaped milling cutter |
| 3 x | Cut off/mitre saw KGS 80 |
| 3 x | Ball-shaped diamond coated 3.2mm |
| 4 x | Gear Chuck |
| 2 x | Multipurpose Vices Primus100 |
| 5 x | Super-fine sanding discs grain 400 |
| 2 x | Self-adhesive white corundum sanding discs for TG 250/E |
| 3 x | MICRO Miller MF 70 |
| 3 x | Edge cutter with pin 6.4mm |
| 4 x | Coarse-toothed blades (No. 5: 36 teeth per 25mm) |
| 4 x | 14-piece parallel supports set |
| 1 x | Sanding Drums |
| 1 x | BGA-Bottom-118 |
| 1 x | BGA-Bottom-11 |
| 4 x | Bench drill press TBH |
| 5 x | Angle cutter 45 ° |
| 6 x | MICRO Miller FF 230 |
| 4 x | Aluminium Die-Cast |
| 2 x | Hot wire cutter THERMOCUT 12/E |
| 1 x | BGA-Bottom-115 |
| 1 x | Sanding Drums |
| 2 x | Sanding pads for OZI 220/E grit 80 |
| 3 x | Sanding bands 14x13mm |
| 3 x | Flexible polishing pad set |
| 1 x | Thicknesser DH 40 |
| 1 x | BGA-Bottom-111 |
| 2 x | Screwdriver bit set. 49-piece. |
| 3 x | Rounding over cutter 6.4mm |
| 2 x | BeeHive204 |
| 1 x | Diamond Grinding Bits 5mm |
| 2 x | High quality corundum grinding bits |
| 3 x | Diamond Grinding Bits 1,8mm |
| 1 x | sanding belts for BBS/s Grit 80 |
| 4 x | HSS boring tool set, 6 pieces |
| 3 x | Complete Engraving Kit with trial glass |
| 1 x | Sanding Drums |
| 3 x | Chuck for TBM 220 |
| 3 x | Flap Wheels |
| 2 x | Saw blade made of high-alloy special steel |
| 4 x | Independent four jaw chuck for the DB 250 |
| 1 x | Crimping plier for BNC |
| 1 x | Cylindrical cutters |
| 4 x | Cutting disc, with reinforcement |
| 3 x | Grinding mop cylinder grit 120 |
| 1 x | HSS drill bits 1.2mm |
| 2 x | Half round cutter 13mm |
| 4 x | Corundum bound cutting disc for LWS |
| 4 x | Tungsten tipped saw blade |
| 5 x | Diamond blade for MBS 240/E |
| 1 x | Grinding and Polishing Machine SP/E |
| 3 x | sandpaper for PS 13 Grot 180 |
| 1 x | Felt polishers |
| 1 x | HSS drill bits 0.8mm |
| 2 x | Jig saw blades made of HSS |
| 1 x | MICROFLAM gas soldering set MGS |
| 4 x | Corundum sanding discs for LWS |
| 2 x | MICRO Band Saw MBS 240/E |
| 2 x | Slot cutter 5.0mm |
| 2 x | Flexible silicon discs |
| 2 x | Corundum grinding disc for LWS |
| 1 x | ROTARY COAXIAL CABLE STRIPPER 3-STEPS |
| 1 x | Set of precision cutters |
| 2 x | Surface planer AH 80 |
| 4 x | Five piece HSS chisel set |
| 1 x | Supercut jig saw blades of special steel |
| 1 x | Sanding Discs |
| 5 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
| 2 x | Cotton polishers |
| 4 x | Collet Set for accurate use on round components |
| 2 x | Angle polisher WP/E |
| 1 x | Grinding mop cylinder grit 240 |
| 2 x | sandpaper for PS 13 Grit 240 |
| 3 x | Fine dust paper filter for CW-matic |
| 2 x | Self-adhesive white corundum sanding discs for TG 125/E |
| 3 x | Corundum fan sander for LWS |
| 1 x | Stainless steel cups |
| 2 x | HSS drill bits 0.5mm |
| 4 x | Super-fine sanding discs grain 000 |
| 2 x | Polishing paste |
| 3 x | Extra narrow bandsaw blade (3.5mm) for tight radii |
| 1 x | Cylinder sander WAS/E |
| 2 x | MICRO-screwdrivers |
| 2 x | Long neck straight drill/grinder LB/E |
| 1 x | Cups brushes |
| 2 x | Ball-shaped diamond coated 2.2mm |
| 2 x | Band knife of hardened spring band steel (without teeth) |
| 1 x | HSS drill bits 1.0mm |
| 2 x | sandpaper for PS 13 Grit 400 |
| 1 x | Ball-shaped diamond coated 1.2mm |
| 1 x | Stainless steel brushes |
| 2 x | Bench drill machine TBM 220 |
| 3 x | Flexible polishing pad set |
| 2 x | Diamond Twist Drills |
| 3 x | Coarse-toothed blades (No. 5: 17 teeth per 25mm) |
| 4 x | Blade holders for DS 460 |
| 2 x | Diamond Grinding Bits 1mm |
| 3 x | Crosscut 'Super-Cut' blade |
| 4 x | Coarse-toothed blades (No. 3: 41 teeth per 25mm) |
| 4 x | Diamond blade |
| 4 x | Diamond cutting blade for OZI |
| 3 x | Professional Drill/Grinder IBS/E |
| 2 x | Tungstein carbide rasp - and cutting disc |
| 3 x | sanding belts for BBS/s Grit 150 |
| 1 x | Long neck angle milling/drilling unit LWB 220/E |
| 5 x | Replacement cutting disc for MICRO cutter MIC |
| 1 x | Grinding mop cylinder grit 120 |
| 3 x | Beeprog2C |
| 1 x | Diamond-coated cutting disc for MIC |
| 3 x | Rasp plate with metal burrs made from wolfram carbide for LWS |
| 1 x | Diamond Coated |
| 1 x | MICROMOT 50 |
| 5 x | Replacement belts for BSL 220/E |
| 4 x | HSS immersion saw blades for OZI |
| 3 x | Replacement belts for BSL 220/E |
| 1 x | Precision Drill/Grinder FBS 240/E |
| 2 x | SmartProg2 |
| 1 x | sanding belts for BBS/s Grit 240 |
| 1 x | HSS drill bits 1.6mm |
| 2 x | Microfibre polishing wheel, 15-ply (100mm) |
| 3 x | Corundum sanding discs for LWS |
| 2 x | MICROMOT Mains Adapter NG 2/S |
| 1 x | Blade guides separately |
| 1 x | Lathe System PD 400 |
| 1 x | Tungsten carbide cutter 3.0mm |
| 2 x | Super-Cut |
| 1 x | TIP SPT-4 |
| 1 x | High quality corundum grinding bits |
| 1 x | TIP SPT-10 |
| 2 x | Universal holder UHZ |
| 1 x | Engraving tool GG |
| 1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
| 1 x | Sanding fleece for LWS |
| 1 x | Solid carbide stylus for engraving |
| 2 x | Super safety and specialty bit set, 75-piece |
| 4 x | Lambswool polishing disc |
| 1 x | High quality corundum grinding bits |
| 1 x | BGA-Bottom-101 |
| 1 x | Diamond-coated cutting and roughing disc |
| 2 x | Mill/Drill System BFW 40/E |
| 1 x | Super-fine sanding discs grain 2000 |
| 1 x | BGA-Bottom-102 |
| 1 x | BGA-Bottom-106 |
| 2 x | MICROMOT steel collet set |
| 2 x | Drill chuck with sliding sleeve for the tailstock |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 4 x | Mill/Drill Unit BFB 2000. |
| 2 x | Multipurpose Vices Primus 75 |
| 1 x | BGA-Bottom-10 |
| 1 x | BGA-Bottom-108 |
| 1 x | Precision Vice FMS 75 |
| 1 x | BeeHive208S |
| 1 x | Fibre-Cut Discs |
| 1 x | Diamond Cutting Discs |
| 2 x | Combi cutter 6.5/2.5mm |
| 1 x | Diamond Cutting Discs |
| 1 x | Fibre-Cut Discs |
| 1 x | Core box bit 3.2mm |
| 1 x | Diamond Cutting Discs |
| 3 x | Professional polishing sponge |
| 1 x | BGA-Bottom-125 |
| 1 x | BGA-Bottom-1 |
| 2 x | Step clamps made of steel |
| 1 x | High quality corundum grinding bits |
| 1 x | Milling cutter set (2 - 5mm) |
| 1 x | MICROMOT tool holder |
| 1 x | Corundum fan sander for LWS |
| 2 x | Coarse-toothed (18 TPI per 25mm) |
| 1 x | 10-piece wood router cutter set |
| 1 x | Brass brushes |
| 1 x | Cutting tools of high quality cobalt HSS steel, ground |
| 2 x | Tungsten carbide cutters set |
| 1 x | BGA-0245/0242 |
| 1 x | HSS immersion saw blades for OZI |
| 1 x | Wolfram vanadium steel milling bits |
| 2 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
| 2 x | Tungsten Carbide Tipped (TCT) |
| 1 x | BGA-0245/0243 |
| 1 x | BGA-0246/0243 |
| 1 x | V-slot cutter 6.5mm |
| 1 x | Slot cutter 6.5mm |
| 1 x | Sanding bands 14x13mm |
| 1 x | MICRO Heat gun MH 550 |
| 1 x | Coarse-toothed blades (No. 1: 50 teeth per 25mm) |
| 1 x | Sanding pads for OZI 220/E grit 240 |
| 1 x | Tool holder for rotary tools |
| 1 x | HSS twist drill set with centring pin |
| 1 x | Footswitch FS |
| 1 x | MICROMOT drill stand MB 200 |
| 1 x | Pensander PS 13 |
| 1 x | BGA-0246/0244 |
| 1 x | Three-jaw steel drill chuck |
| 1 x | Blade for Wood and Plastics |
 |
| €50,903.13 |
