€395.00 + VAT

BGA-0245/0241
[70-0254/0241]

BGA-0245/0241

special converter, assigned for memories in BGA package, for example Am29DL164CBxxWC in FBGA48
top board: BGA-Top-1 ZIF-CS (order no. 70-0241)
bottom board: BGA-Bottom-1 (order no. 70-0245)
ZIF socket accepts many variations of BGA packages, that differ in ball diameter, ball width and package thickness.
The picture at Accepted package(s) section shows the range of all dimensions of BGA packages, which are accepted by this BGA-Top board.
operation life of ZIF socket - 500.000 actuations
order no.: 70-0245/0241

socket: ZIF BGA48 (accept package up to 48 balls), ClamShell type
bottom: 2 rows, 2x 24 pins, square, 0.6x0.6mm, rows spacing 600mil

Converter manual

Insert converter to the programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this converter in programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the programmer.
Open the converter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in converter ZIF socket is show on the picture in control program PG4UW (Device info for selected device).
Visually check position of device in converter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
Be careful, because the incorrect insertion of converter to the programmer ZIF socket or device to the converter ClamShell ZIF socket can damage the programmed device.
To take out the device, open converter ClamShell ZIF socket and remove device from it.
When you finish work with converter, remove it from the programmer ZIF socket.
Do not directly touch the pins of the converter and converter ZIF socket, because dirt may cause errors during programming of device.
For handling with the device we recommended to use a vacuum pick up tool.
The picture show, how to put together the BGA-Top-x ZIF-CS and BGA-Bottom-x boards to have complete BGA converter

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

2 x	MICRO Miller FF 230
1 x	Broca de alta duração de 0.3mm
2 x	Corundum sanding discs for LWS
1 x	Broca de alta duração de 1.2mm
2 x	MICROMOT Mains Adapter NG 2/S
1 x	Engraving tool GG
1 x	TORX-screwdrivers T10
1 x	Broca de alta duração de 1.3mm
1 x	Replacement cutting wire for the THERMOCUT 12/E
2 x	Backing disc for LWS
1 x	High quality corundum grinding bits
1 x	Broca de alta duração de 1.1mm
1 x	Corundum bound cutting disc for LWS
2 x	broca de alta duração de 0,2mm
1 x	Broca de alta duração de 0.4mm
2 x	Pinça SOIC de 8 pinos
1 x	Broca de alta duração de 3.0mm
2 x	Broca de alta duração de 2.6mm
2 x	Broca de alta duração de 1.4mm
1 x	Broca de alta duração de 2.7mm
1 x	Diamond-coated cutting and roughing disc
1 x	Broca de alta duração de 2.0mm
1 x	Corundum grinding disc for LWS
1 x	Blade for Wood and Plastics
1 x	Diamond Grinding Bits 1,8mm
1 x	Core box bit 3.2mm
1 x	Corundum fan sander for LWS
1 x	High quality corundum grinding bits
1 x	Socket Wrenches 5.5
1 x	Dividing attachment TA 230 for PF 250
1 x	Replacement glue sticks for HKP 220
1 x	Corundum fan sander for LWS
1 x	Glass fibre contact cleaner brush
2 x	broca de alta duração de 0,6mm
1 x	6-piece TORX-screwdriver-set
1 x	Socket Wrenches 3.5
2 x	6-piece screwdriver and cross-recess set
1 x	High quality corundum grinding bits
1 x	Cups brushes
1 x	Broca de alta duração de 0.9mm
1 x	Broca de alta duração de 0.8mm
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Wrench Keys 0.9
2 x	BGA-Bottom-10
1 x	BGA-Bottom-165
1 x	BGA-Bottom-108
2 x	Safety Insulated Pozidriv Screwdriver 14-644VDE
2 x	Grinding mop cylinder grit 120
1 x	BGA-Bottom-147
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	BGA-Bottom-18
1 x	sanding belts for BBS/s Grit 80
1 x	DIL16/SOIC16 ZIF 200 mil
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	CRIMPING PLIERS/WIRE STRIPPER
2 x	BGA-Bottom-103
1 x	BGA-Bottom-150
1 x	DIL44/PLCC44 ZIF
2 x	Steel tape measure
3 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	DIL8W/SOIC8 ZIF 200mil
1 x	DIL20W/PLCC20 ZIF
1 x	Screwdriver 0.8
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	Wrench Keys 2.0
1 x	Wrench Keys 1.3
1 x	DIL20/PLCC20 ZIF-CS
1 x	Cross-recess Screwdrivers Pozidriv 1
1 x	Bottom PSOP44 NOR-2
1 x	BGA-Bottom-15
2 x	Replacement belts for BSL 220/E
1 x	sanding belts for BBS/s Grit 150
1 x	Inspector mirror
1 x	BGA-Bottom-145
1 x	Cross-recess Screwdrivers 1
1 x	BGA-Bottom-14
2 x	Insulation Resistance Tester MG125
1 x	TU 2004V
2 x	BGA-Bottom-216
1 x	BGA-Bottom-217
1 x	BGA-Bottom-204
1 x	BGA-Bottom-111
1 x	BGA-Bottom-118
3 x	Warding files set, 6pcs
1 x	Brass contact cleaner brush
1 x	DIL28/QFN28-2 ZIF-CS
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	BGA-Bottom-21
1 x	Screwdriver 1.5
1 x	Diamond cutting blade for OZI
1 x	Cutter head for copy and surface milling MT2
1 x	Angle cutter 45 °
2 x	Lever Dial Indicator
1 x	Rebating cutter 6.4mm
1 x	6-piece screwdriver and cross-recess set
1 x	ESD Tweezers 5-192
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Plastic magnifying glass
3 x	magnetic base 80kg
2 x	Magnetic base
1 x	Disc cutters
1 x	Round nose pliers 185mm
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
2 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	Flat nose pliers 165mm
3 x	Precision caliper 500mm
1 x	Safety Insulated Phillips Screwdriver 14-633VDE
1 x	MICRO Miller FF 500
1 x	MICROMOT Mains Adapter NG 2/E
1 x	Precision magnetic gauge stand
1 x	Flexible silicon discs
1 x	PLCC Puller
1 x	Round nose pliers 45º EUROline-Conductive
1 x	Diamond blade for MBS 240/E
1 x	PRECISION WIRE STRIPPER ESD-PLUS
1 x	Delta sander OZI/E
1 x	Round nose pliers 165mm
1 x	6-piece screwdriver set ESD
1 x	PLCC Extractor
1 x	Edge cutter with pin 6.4mm
1 x	ACCENT SERVICE TOOLS SET
1 x	ESD Tweezers 5-191
1 x	Combination pliers 210mm
1 x	STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x	Diamond Cutting Discs
1 x	ESD Tweezers 5-194
1 x	6-piece wrench key set ESD
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	Cylindrical cutters
1 x	Flap Wheels
1 x	PVC-insulated tweezers 5-107-6
1 x	Digital caliper gauge 300 mm
1 x	6-piece screwdriver and cross-recess set
1 x	Diamond Twist Drills
1 x	DIL32/PLCC32 ZIF
1 x	BGA-0246/0243
1 x	TIP SPT-9
2 x	Precision caliper square
1 x	BeeHive204
1 x	TUNER 200ml
1 x	Footswitch FS
1 x	EUROline mini side cutter
1 x	IC tweezers
1 x	BGA-Bottom-229
1 x	Fixed Steady
1 x	DIL34/SSOP34 ZIF 200 mil
1 x	DIL44/SOIC44 ZIF-CS
1 x	EUROline flat nose pliers
1 x	DIL28/TSOP28 ZIF 11.8 mm
1 x	EUROline side cutter pointed head
1 x	VIDEOCLEAN 200ml
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	DIL8/QFN8-1 ZIF-CS
3 x	EUROline set of pliers
1 x	BGA-Bottom-222
1 x	Spare cutting wire
3 x	Four Jaw Chuck
1 x	BGA-Bottom-106
1 x	EUROline end cutter
2 x	Dial gauge
1 x	DEGRESER 200ml
1 x	OPTI BF20L VARIO
1 x	EUROline mini side cutter
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	DIL48/PLCC68 ZIF MCS51-1
1 x	6pcs Double Open End wrench set
1 x	DIL8W/SOIC8 ZIF 150mil
1 x	OPTI BF16 Vario
1 x	BGA-Top-5 ZIF-CS

€21,871.52