€12.67 + VAT

TOP-PIN 200ml
[1101412]

TOP-PIN 200ml

Long Term Protection of Precious Metal Contacts and Connectors.

  • TOP-PIN has been specially developed for preserving precious metal contacts.
  • It gently cleans lubricates and protects these micro-thin surfaces of contacts and connectors.
  • The high-quality synthetic active agents and inhibitors show remarkable lubricating and anti-corrosion properties, thus preventing abrasion and damaging of delicate precious metal layers and ruling out any corrosion of supporting base metals.
  • The protective film of TOP-PIN is stable, very thin, highly lubricating, and resistant to high heat

Application:

  • TOP-PIN is recommended for PCB gold fingers, computer interface connectors and guarantees a long-lasting preservation of operational reliability for contacts and connectors of all types.
  • The use of TOP-PIN is particularly recommended in high-quality electronic appliances and in the case of aggresive environments in workshops, industry, electronic motorcar equipment, EDP, telecommunications, aerospace and in the military sector.

Technical Data:

 

Colour: yellowish
Odour: that of solvents
Density: 0.67 g / cm³
Heat resistance (film): up to +300° C
Anit-corrosion protection:  4 cycles (DIN IEC 68)
Lubricating properties under pressure: excellent
Reviews
Manufacturers
1 x Pinça SOIC de 8 pinos
2 x Vacum SAA 901
2 x Inpection mirror 1-978
2 x Boring Bar for CCMT
2 x EUROline mini side cutter
5 x Inspector mirror
4 x DCGT 070202F-AL
1 x Table Sawr TKS 315 E
1 x Chuck for TBM 220
2 x EUROline set of pliers
2 x Router base OFV
1 x Safety Insulated Pozidriv Screwdriver 14-641VDE
3 x Boring Bar for CCMT 8mm
1 x Steel tape measure
4 x PLCC Puller
2 x EUROline flat nose pliers
2 x Insert CCGT120404-AK
3 x surface planing and thicknessing ADH 200
2 x Insert CCGT060202-AK
3 x Wood Lathe DB900
1 x SCLCR1010E06
3 x MICRO Miller FF 230
1 x EUROline end cutter
1 x Complete Engraving Kit with trial glass
2 x TU 2004V
3 x OPTI BF16 Vario
3 x OPTI BF20 VARIO
2 x Crimping plier for BNC
1 x Morse taper MT3 - B16
3 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
4 x OPTI BF20L VARIO
3 x TIP SPT-3
1 x CM2 - B16 - M10
1 x Precision quick-action drill chuck 0-8mm B16
1 x Warding files set, 6pcs
3 x CRIMPING PLIERS/WIRE STRIPPER
1 x TU 2404
1 x Safety Insulated Phillips Screwdriver 14-633VDE
1 x Safety Insulated Phillips Screwdriver 14-632VDE
2 x Professional Drill/Grinder IBS/E
5 x 6-piece screwdriver and cross-recess set
3 x Compact workshop vacuum cleaner CW-matic
3 x IC tweezers
3 x TIP SPT-6
3 x PLCC Extractor
2 x Cutting tools of high quality cobalt HSS steel, ground
2 x MICROFLAME burner MFB/E
3 x HSS boring tool set, 6 pieces
1 x FREEZER-TOP 200ml
1 x MICROMOT 50/EF
2 x Beeprog2C
1 x Band knife of hardened spring band steel (without teeth)
1 x Brass brushes
2 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
2 x sclcr2525M12
1 x Sanding bands 14x13mm
2 x Cutter head for copy and surface milling MT2
1 x Glass fibre contact cleaner brush
1 x sanding belts for BBS/s Grit 240
1 x Wood Lathe DB450
1 x Stainless steel wheels
1 x 6-piece screwdriver and cross-recess set
1 x TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x High quality corundum grinding bits
2 x Handy 1515
3 x quantum revolving center CM2
2 x TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
2 x Insulation Resistance Tester MG125
1 x MICRO-screwdrivers
1 x Bench drill press TBH
1 x Fibre-Cut Discs
1 x Lever Dial Indicator
1 x EUROline round nose pliers
1 x Precision lathe PD 250/E
1 x Lathe System PD 400
1 x Side cutters 195mm
1 x Blade holders for DS 460
3 x Insulation Resistance Tester MG500
2 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
2 x BeeProg2
1 x Sanding bands 14x13mm
1 x Steel cups
1 x Grinding mop cylinder grit 120
1 x Cutter head for copy and surface milling MT3
1 x Fibre-Cut Discs
3 x 3-jaw chuck centrically clamping 125mm
1 x Multipurpose Vices Primus 75
2 x Lathe tools 10mm pastilhados
1 x Collet chuck ER32 for D250X550
2 x Quick-action tool holder kit SWH AA
2 x MICRO Miller FF 500
1 x TORX-screwdrivers T15
1 x Cross-recess Screwdrivers 2
3 x Cutting tool 10 mm
1 x Broca de alta duração de 2.9mm
1 x Broca de alta duração de 2.8mm
2 x TIP SPT-4
2 x 6-piece set of ESD/EGB tweezers
1 x Cutting tool 16 mm
1 x Fine dust paper filter for CW-matic
1 x Cross-recess Screwdrivers 1
2 x Precision quick-action drill chuck 0-13mm B16
2 x Face clamping disc for D250X550
1 x 6-piece TORX-screwdriver-set
1 x Cross-recess Screwdrivers 0
1 x Belt sander BBS/S
1 x TIP SPT-9
1 x ESD Tweezers 5-191
1 x Flexible silicon discs
1 x Cotton polishers
4 x Mini side cutters EUROline-Conductive
1 x Lathe chuck flange for D250X550
1 x Conj 5 pinças ESD
1 x SILICONE 200ml
1 x Socket Wrenches 5.0
1 x TORX-screwdrivers T5
1 x TOP-PIN 200ml
1 x Side cutters EUROline-Conductive
1 x EUROline-Conductive set of pliers
1 x Bench drill machine TBM 220
1 x Screwdriver 2.5
1 x Flat nose pliers 45º EUROline-Conductive
1 x Socket Wrenches 2.0
2 x SPRAYFLON 200ml
1 x SPRAYOIL 200ml
1 x MULTI 200ml
2 x Ceramic-tipped tweezers and ESD 5-096
1 x TIP SPT-2
2 x Tool holder type H for SWH 1-A
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x TORX-screwdrivers T9
1 x Socket Wrenches 3.2
1 x ESD Tweezers 5-192
1 x ESD Tweezers 5-195
1 x Socket Wrenches 1.5
1 x machine base with shelves for D250X550
1 x VASELINE 200ml
€48,492.90
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook