€4.86 + VAT

SILICONE 200ml
[1121412]

SILICONE 200ml

Viscous, Long-Lasting Insulation and Lubricating Oil.

  • SILICONE is a high-quality, viscous insulating oil with a breakdown voltage of 12 kV / mm.
  • It does not dry up, is water-repellent and therefore an excellent moisture buffer.
  • SILICONE is also a good universal lubricating agent.
  • It is stable within a range of temperature from -50° C to +200° C.
  • Does not attack any engineering material.
  • Is non-toxic.

Application:

  • To avoid spark dischange in high-voltage transformers, on tube bases, etc.
  • Eliminates creepage currents and corona effects.
  • Prevents short-circuits and insulates.
  • Can also be used as a lubricating agent for wire-pulling.
  • Can also be used as a mould relase agent.

Technical Data:

 

Colour: colourless
Odour:  that of solvents
Density: 0.82 g / cm³
Viscosity (oil): 1000 mm² / s(25° C)
Heat resistance: up to +200° C
Dielectric strength (oil): 12 kV / mm (20° C)
Reviews
Manufacturers
2 x Tungsten tipped saw blade
1 x Glass fibre contact cleaner brush
4 x Precision magnetic gauge stand
2 x 10-piece wood router cutter set
1 x Four Jaw Chuck
1 x Insulation Resistance Tester MG500
1 x Combi cutter 6.5/2.5mm
2 x Milling cutter set (2 - 5mm)
1 x HSS drill bits 1.0mm
5 x SPRAYFLON 200ml
1 x Broca de alta duração de 0.7mm
8 x STRIPPING TOOL WITH ADJUSTABLE KNIVES
2 x broca de alta duração de 0,2mm
3 x Hot wire cutter THERMOCUT 650
6 x Crimping plier for BNC
4 x 6-piece wrench key set ESD
4 x TOP-PIN 200ml
7 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
4 x 6-piece socket wrenches ESD
2 x Milling cutter set (6 - 10mm)
3 x HSS immersion saw blades for OZI
1 x Grinding mop cylinder grit 240
2 x Cotton polishers
1 x Self-adhesive white corundum sanding discs for TG 250/E
9 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Boring Bar for DCMT 10mm
1 x FREEZER-TOP 200ml
3 x Lathe chuck flange for D250X550
5 x Cutting tool 10 mm
4 x VASELINE 200ml
1 x Broca de alta duração de 2.1mm
3 x Coarse-toothed (25 TPI per 25mm)
2 x sanding belts for BBS/s Grit 80
3 x 2-speed scroll saw DSH
3 x Jig saw STS 12/E
2 x Table Saw FET
3 x Parting tool 10mm
1 x Broca de alta duração de 0.9mm
1 x Broca de alta duração de 2.4mm
4 x sanding belts for BBS/s Grit 240
3 x Sanding pads for OZI 220/E grit 80
2 x HSS twist drill set with centring pin
2 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x Boring Bar for CCMT 8mm
1 x ANTISTATIC 200ml
1 x Broca de alta duração de 2.3mm
2 x Blade holders for DS 460
3 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x MICRO Miller FF 230
3 x Thicknesser DH 40
8 x CRIMPING PLIERS/WIRE STRIPPER
1 x Broca de alta duração de 1.2mm
3 x Coarse-toothed blades (No. 5: 36 teeth per 25mm)
4 x MULTI 200ml
2 x Tungsten carbide drills Ø1,5mm
2 x magnetic base 80kg
1 x Micro Compound Table KT 70
2 x Face clamping disc for D250X550
2 x Coarse-toothed (10 TPI per 25mm)
1 x Broca de alta duração de 0.5mm
1 x Pinça SOIC de 8 pinos
1 x FREEZER-BR 200ml
2 x sclcr2525M12
3 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x Sanding pads for OZI 220/E grit 240
3 x sanding belts for BBS/s Grit 150
2 x HSS drill bits 1.6mm
4 x Safety insulated screwdrivers 14-602 VDE
3 x Hot wire cutter THERMOCUT 230/E
5 x Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x Flexishaft MICROMOT 110/BF
2 x Tungsten carbide drills Ø1mm
2 x Coarse-toothed (18 TPI per 25mm)
2 x Jig saw blades made of HSS
5 x Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x Broca de alta duração de 0.8mm
2 x Motor-driven carving device MSG
2 x Bench Circular Saw KS 230
4 x Safety insulated screwdrivers 14-601 VDE
4 x Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x Grinding mop cylinder grit 120
1 x EUROline snipe nose pliers
2 x MICRO shaper MP 400
4 x SILICONE 200ml
1 x MICRO cutter MIC
2 x Grinding mop cylinder grit 80
1 x Boring Bar for CCMT 16mm
2 x Surface planer AH 80
1 x POLISHER 200ml
5 x lathe tools 10mm
2 x Cotton polishers
4 x Super jig saw STS/E
1 x PRINTER 200ml
1 x Scroll saw DS 230/E
2 x MICRO woodturning lathe DB 250
2 x Conjunto de três brocas de ponto
1 x MICRO Miller FF 500
2 x HSS drill bits 0.5mm
1 x Multipurpose Vices Primus 75
4 x Safety insulated screwdrivers 14-606 VDE
1 x 6pcs Double Open End wrench set
3 x Collet chuck ER32 for D250X550
2 x Spiral blade. 125mm long with plain ends (without pins).
3 x Diamond cutting blade for OZI
1 x Grinding mop cylinder grit 120
2 x DUSTER-BR 200ml
3 x Cylinder sander WAS/E
2 x HSS drill bits 0.8mm
1 x Broca de alta duração de 1.4mm
3 x Hot wire cutter THERMOCUT 12/E
1 x Broca de alta duração de 1.0mm
1 x Broca de alta duração de 1.3mm
1 x Broca de alta duração de 1.5mm
1 x Broca de alta duração de 1.1mm
1 x broca de alta duração de 0,6mm
2 x HSS cutting blade for OZI
2 x Sanding pads for OZI 220/E grit 150
2 x HSS twist drill set to DIN 338
1 x MICRO Band Saw MBS 240/E
2 x HSS immersion saw blades for OZI
1 x HSS drill bits 1.2mm
1 x Broca de alta duração de 2.0mm
1 x Broca de alta duração de 0.4mm
1 x BeeHive208S
2 x PROLUB 200ml
1 x Tungsten carbide drills Ø2mm
1 x SCREEN 200ml
2 x Insert CCGT060202-AK
1 x Broca de alta duração de 2.2mm
1 x Cut off/mitre saw KGS 80
3 x Handy 1515
1 x Broca de alta duração de 2.5mm
2 x SPRAYOIL 200ml
1 x Boring Bar for CCMT
1 x PROTECTION 200ml
1 x Supercut jig saw blades of special steel
3 x Blade for Wood and Plastics
1 x Diamond Cutting Discs
4 x Morse taper MT2 - B16
4 x Diamond-coated cutting and roughing disc
1 x Wood Lathe DB450
1 x Precision quick-action drill chuck 0-10mm B16
3 x Corundum fan sander for LWS
2 x High quality corundum grinding bits
1 x Diamond Cutting Discs
3 x Steady rest for D250X550
1 x High quality corundum grinding bits
1 x Universal and oil siphoning pump AP 12
2 x Delta sander OZI/E
2 x Extra narrow bandsaw blade (3.5mm) for tight radii
2 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
2 x Tungsten Carbide Tipped (TCT)
1 x Self-adhesive white corundum sanding discs for TG 125/E
2 x Follow rest for D250X550
3 x Rasp plate with metal burrs made from wolfram carbide for LWS
2 x Corundum grinding disc for LWS
1 x Professional polishing sponge
1 x Insert LGTN-3
2 x Disc Sander TG 125/E
1 x 4-jaw chuck individually clamping 100mm
2 x Corundum bound cutting disc for LWS
2 x High quality corundum grinding bits
1 x Cutting tool 8 mm
2 x High quality corundum grinding bits
2 x Precision caliper square
1 x 3-jaw chuck centrically clamping 125mm
3 x Pensander PS 13
1 x Lathe tools 8mm pastilhados
3 x High quality corundum grinding bits
1 x Professional set for finish grinding and polishing
1 x High quality corundum grinding bits
2 x Backing disc for LWS
1 x Table Sawr TKS 315 E
2 x Band knife of hardened spring band steel (without teeth)
2 x Collet chuck ER25 for D250X550
1 x Belt sander BBS/S
1 x Corundum grinding disc for LWS
3 x Crosscut 'Super-Cut' blade
1 x Vacum SAA 901
2 x Fluted filter for CW-matic
2 x Blade for Steel and brass
1 x Sanding fleece for LWS
2 x machine base with shelves for D250X550
2 x Digital caliper gauge 300 mm
2 x Saw blade made of high-alloy special steel
4 x Precision quick-action drill chuck 0-10mm B16
1 x Set of precision cutters
1 x Angle polisher WP/E
3 x Safety insulated screwdrivers 14-608 VDE
1 x Insert LGTN-2
2 x Super-fine sanding discs grain 400
2 x Bandsaw blade of bimetal for MBS 240/E
2 x Precision caliper 500mm
1 x Polishing felt, medium hard
2 x Self-adhesive silicone film for easy sanding disc replacement
1 x Grinding and Polishing Machine SP/E
1 x centrically clamping 125mm
1 x Steel tape measure
2 x Corundum fan sander for LWS
1 x Safety Insulated Phillips Screwdriver 14-634VDE
2 x Super-Cut
1 x surface planing and thicknessing ADH 250
3 x Lathe tools 10mm pastilhados
1 x lathe tools 8mm
1 x CM2 - B16 - M10
1 x High quality corundum grinding bits
1 x Polishing machine PM 100
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x 6-piece screwdriver set ESD
1 x Corundum sanding discs for LWS
1 x Diamond blade for MBS 240/E
2 x Sanding fleece for LWS
1 x Blade guides separately
2 x Belt sander BS/E
1 x Chuck for TBM 220
1 x Safety insulated screwdrivers 14-604 VDE
2 x Precision quick-action drill chuck 0-13mm B16
1 x Fibre-Cut Discs
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Fine dust paper filter for CW-matic
2 x Tungstein carbide rasp - and cutting disc
1 x 3-jaw chuck centrically clamping 100mm
1 x Diamond blade
1 x Cutting tool 16 mm
3 x Quick-action tool holder kit SWH AA
2 x Dial gauge
1 x Tool holder type H for SWH 1-A
1 x Self-adhesive white corundum sanding discs for TG 125/E
1 x Solid carbide saw blade
€31,044.92
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
CRAMOLIN
CRAMOLIN Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook