End side cutters 45º EUROline-Conductive, Oficina-digital.com

Top » Catalog » ESD Tools » EUROline-Conductive pliers » 3-673-15

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
  ESD bracelet and accessories
  ESD Brushes
  ESD Tool set
  ESD workbench pad
  ESD/EGB electronics Screwdrivers->
  ESD/EGB TWEEZERS
  EUROline-Conductive pliers
  Floor cover ESD
  Screwdrivers set ESD
  Severals
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Cylindrical cutters
1 x	Collet Set for accurate use on round components
1 x	Floor cover ESD
2 x	Coarse-toothed (25 TPI per 25mm)
1 x	MICROMOT tool holder
2 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Protective device for hand-operated MICROMOT
1 x	Supercut jig saw blades of special steel
2 x	IC tweezers
2 x	Tool holder for rotary tools
1 x	Tungsten Carbide Tipped (TCT)
1 x	Flame shaped milling cutters
2 x	PLCC Puller
1 x	Mill/Drill Unit BFB 2000.
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Solid carbide stylus for engraving
1 x	Wrench Keys 2.0
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Three-jaw steel drill chuck
1 x	Cross-recess Screwdrivers 2
1 x	Hot wire cutter THERMOCUT 650
1 x	Crimping plier for BNC
1 x	Flexishaft MICROMOT 110/BF
2 x	Diamond Coated
1 x	surface planing and thicknessing ADH 250
1 x	Half round cutter 13mm
2 x	PLCC Extractor
1 x	Super-Cut
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Footswitch FS
1 x	Four Jaw Chuck
1 x	Replacement belts for BSL 220/E
1 x	Centre Turning Attachment
1 x	Fixed Steady
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Radius Cutting Attachment, complete with pointed tool
1 x	MICROMOT drill stand MB 200
1 x	Vacum SAA 901
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	MICROMOT extension cord. 300cm.
1 x	Replacement belts for BSL 220/E
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Tungsten carbide cutter 2.0mm
1 x	Tungsten carbide cutter 1.0mm
1 x	Combi cutter 6.5/2.5mm
1 x	IC Test clip 20 pins
1 x	Edge cutter with pin 6.4mm
1 x	Grinding mop cylinder grit 240
1 x	Jig saw blades made of HSS

€2,529.03