1 x | Multipurpose Vices Primus100 |
1 x | Cutter head for copy and surface milling MT2 |
2 x | Precision quick-action drill chuck 0-10mm B16 |
1 x | Table Saw TKS 2500 SC |
2 x | ANTISTATIC 200ml |
2 x | FLUX-OFF 400ml |
2 x | Precision Vice FMZ |
1 x | CD-CLEANER 200ml |
1 x | Super safety and specialty bit set, 75-piece |
2 x | Boring Bar for CCMT 16mm |
2 x | Cut off/mitre saw KGS 80 |
2 x | Machine Vice MS 4 |
1 x | Threading inserts 60º |
2 x | Flat nose pliers 165mm |
1 x | Earth wire with dummy Schunko-plug |
2 x | sclcr2525M12 |
2 x | MICRO Band Saw MBS 240/E |
1 x | Safety Insulated Pozidriv Screwdriver 14-642VDE |
1 x | Scroll saw DS 230/E |
1 x | SPRAYFLON 200ml |
1 x | Motor-driven carving device MSG |
1 x | MICRO Miller FF 230 |
1 x | Blade holders for DS 460 |
2 x | High quality corundum grinding bits |
1 x | Floor cover ESD |
1 x | MICRO woodturning lathe DB 250 |
2 x | PROLUB 200ml |
2 x | Boring Bar for CCMT 8mm |
1 x | BGA-Bottom-153 |
1 x | Table Sawr TKS 315 E |
1 x | Earth wire |
3 x | Sanding bands 14x13mm |
1 x | BGA-Top-132 ZIF-CS |
1 x | IC Test clip 20 pins |
1 x | 6-piece screwdriver set ESD |
1 x | 6-piece socket wrenches ESD |
2 x | 6-piece TORX-screwdriver-set ESD |
1 x | Broca de alta duração de 2.4mm |
1 x | Mini side cutters EUROline-Conductive |
1 x | TOP-PIN 200ml |
1 x | Cross-recess Screwdrivers Pozidriv 2 |
1 x | Broca de alta duração de 2.3mm |
1 x | TORX-screwdrivers T10 |
2 x | Angle polisher WP/E |
1 x | quantum revolving center CM1 |
2 x | broca de alta duração de 0,2mm |
1 x | Cylinder sander WAS/E |
1 x | Snipe nose pliers 45º EUROline-Conductive |
1 x | BGA-Bottom-88 |
1 x | Side cutters EUROline-Conductive |
1 x | broca de alta duração de 0,6mm |
1 x | Three-jaw steel drill chuck |
1 x | Grinding and Polishing Machine SP/E |
3 x | Broca de alta duração de 1.3mm |
1 x | Hand Magnifier 2-293 |
2 x | PRECISION WIRE STRIPPER ESD-PLUS |
2 x | MICROMOT 50/EF |
1 x | FREEZER-BR 200ml |
2 x | Mini side cutters EUROline-Conductive |
2 x | Broca de alta duração de 1.0mm |
1 x | Broca de alta duração de 2.0mm |
1 x | Wrench Keys 0.7 |
2 x | Round nose pliers 45º EUROline-Conductive |
1 x | Delta sander OZI/E |
2 x | Socket Wrenches 4.0 |
1 x | Belt sander BS/E |
2 x | Broca de alta duração de 2.9mm |
2 x | SCMT060204 |
1 x | 6-piece screwdriver and cross-recess set ESD |
1 x | Precision drill grinder FBS 12/EF |
1 x | Protective device for hand-operated MICROMOT |
2 x | DIL28/TSOP28 ZIF 11.8 mm |
3 x | CM2 - B16 - M10 |
1 x | Long neck angle grinder LHW |
1 x | TORX-screwdrivers T8 |
1 x | Screwdriver 3.0 |
1 x | End side cutters 45º EUROline-Conductive |
4 x | Screwdriver 2.0 |
2 x | Cutting tools of high quality cobalt HSS steel, ground |
3 x | TORX-screwdrivers T7 |
1 x | TORX-screwdrivers T5 |
2 x | Safety Insulated Pozidriv Screwdriver 14-641VDE |
1 x | Morse taper MT2 - B16 |
1 x | Screwdriver 2.5 |
2 x | TORX-screwdrivers T8 |
1 x | Mini side cutters EUROline-Conductive |
1 x | Screwdriver 5.5 |
3 x | Screwdriver 1.5 |
1 x | HSS boring tool set, 6 pieces |
1 x | TORX-screwdrivers T7 |
1 x | Bandsaw blade of bimetal for MBS 240/E |
1 x | Broca de alta duração de 2.1mm |
3 x | Telephon pliers bent 200mm |
1 x | Telephone pliers bent 165mm |
1 x | Socket Wrenches 2.0 |
1 x | BGA-Bottom-151 |
1 x | BGA-Bottom-164 |
3 x | Telephon pliers straight 200mm |
2 x | Side cutters 180mm |
1 x | Flat nose pliers 45º EUROline-Conductive |
2 x | Component tweezers 5-006 |
1 x | Treated muslin polishing wheel, stiff (100 x 15mm) |
1 x | Side cutters 160mm |
1 x | sanding belts for BBS/s Grit 240 |
1 x | Broca de alta duração de 1.5mm |
1 x | Inpection mirror 1-978 |
3 x | EUROline end cutter |
2 x | Safety Insulated Pozidriv Screwdriver 14-644VDE |
2 x | surface planing and thicknessing ADH 250 |
2 x | Tungsten Carbide Tipped (TCT) |
1 x | Broca de alta duração de 2.2mm |
1 x | Threading inserts 60º |
1 x | Titan Tweezers 5-036 |
1 x | TORX-screwdrivers T20 |
2 x | Collet chuck ER25 for D250X550 |
2 x | Quick-action tool holder kit SWH AA |
3 x | Telephon pliers bent 160mm |
1 x | Felt cloth polishing disc (100 x 15mm) |
1 x | Vacum SAA 901 |
1 x | ESD Tweezers 5-193 |
3 x | Titan Tweezers 5-037 |
2 x | CRIMPING PLIERS/WIRE STRIPPER |
1 x | Screwdriver 1.5 |
5 x | Safety Insulated Pozidriv Screwdriver 14-643VDE |
1 x | TORX-screwdrivers T9 |
1 x | Round nose pliers 165mm |
4 x | EUROline round nose pliers |
1 x | |
1 x | Precision quick-action drill chuck 0-10mm B16 |
1 x | Round nose pliers 185mm |
3 x | Safety Insulated Phillips Screwdriver 14-634VDE |
1 x | Telephone pliers stright 205mm |
1 x | Socket Wrenches 5.0 |
3 x | EUROline side cutter pointed head |
1 x | Wrench Keys 1.3 |
2 x | Broca de alta duração de 1.2mm |
1 x | Microfibre polishing wheel, 15-ply (100mm) |
1 x | lathe tools 10mm |
1 x | Threading inserts 60º |
1 x | Replacement carving blades for MSG |
2 x | Rounding over cutter 6.4mm |
1 x | sandpaper for PS 13 Grit 240 |
1 x | centrically clamping 125mm |
1 x | TCMT090204 |
1 x | Diamond blade for MBS 240/E |
1 x | MICROMOT Mains Adapter NG 5/E |
1 x | RT100 - Horizontal-vertical circular dividing table |
1 x | Cylindrical cutters |
1 x | RT150 - Horizontal-vertical circular dividing table |
4 x | Slot cutter 5.0mm |
4 x | Rebating cutter 6.4mm |
1 x | Angle cutter 45 ° |
1 x | Tool holder for rotary tools |
1 x | Aluminium Die-Cast |
1 x | MICROMOT Mains Adapter NG 2/E |
1 x | OPTI BF20 VARIO |
1 x | Wire strippers 165mm |
2 x | precision machine vices FMS200 |
1 x | TU 2004V |
1 x | 4-jaw chuck individually clamping 125mm |
1 x | Chuck for TBM 220 |
1 x | 3-jaw chuck centrically clamping 100mm |
1 x | 2-speed scroll saw DSH |
1 x | Precision quick-action drill chuck 0-13mm B16 |
2 x | RT200 - Horizontal-vertical circular dividing table |
1 x | Precision steel vice PM 40 |
1 x | SCMT09T304 |
1 x | Turning inserts CCMT060204 |
1 x | Diamond Grinding Bits 5mm |
1 x | Ceramic-tipped tweezers and ESD 5-096 |
2 x | 6-piece screwdriver and cross-recess set |
1 x | Turning inserts CCMT09T304 |
1 x | TCMT110204 |
1 x | precision machine vices FMS150 |
1 x | Precision quick-action drill chuck 0-16mm B16 |
2 x | Insert LGTN-2 |
1 x | Corundum bound cutting disc for LWS |
1 x | BGA-Bottom-103 |
1 x | DIL48/PLCC68 ZIF MCS51-1 |
1 x | BGA-Bottom-102 |
2 x | Flexible silicon discs |
1 x | BeeHive208S |
1 x | DIL48/QFP100 ZIF MSP430-1 |
2 x | BeeHive204 |
4 x | Milling cutter set (6 - 10mm) |
1 x | Coarse-toothed (25 TPI per 25mm) |
3 x | Flexible polishing pad set |
2 x | Flexible polishing pad set |
1 x | SmartProg2 |
1 x | HSS cutting blade for OZI |
1 x | DIL24W/SOIC24 ZIF 300mil |
1 x | DIL48/TQFP64-2 ZIF ST7-1 |
1 x | DIL44/PSOP44 ZIF 600 mil |
1 x | DIL28/QFP52 ZIF-CS SX52 |
2 x | DIL16/SOIC16 ZIF 200 mil |
2 x | High quality corundum grinding bits |
1 x | Morse taper MT3 - B16 |
1 x | DIL48/TSOP56 ZIF 18.4mm Flash-1 |
1 x | Drill chuck with sliding sleeve for the tailstock |
1 x | MICRO Miller FF 500 |
1 x | Polishing paste |
2 x | BGA-Bottom-223 |
1 x | DIL48/PLCC52 ZIF-CS 68HC05BX |
2 x | DIL40/TQFP64 ZIF EM652X |
1 x | DIL16W/SOIC16 ZIF 300mil |
1 x | BGA-Bottom-148 |
1 x | BGA-Bottom-15 |
2 x | BGA-Bottom-216 |
2 x | Tool holder type D for SWH 1-A |
1 x | BGA-Bottom-118 |
1 x | BGA-Bottom-211 |
1 x | BGA-Bottom-218 |
1 x | Bottom PSOP44 NOR-1 |
1 x | DIL8/SOIC8 ZIF 150mil |
2 x | Bottom PSOP44 NOR-2 |
1 x | DIL8W/SOIC8 ZIF 150mil |
1 x | BGA-Bottom-20 |
1 x | DIL48/PLCC84 ZIF MCS196-2 |
1 x | BeeProg2 |
1 x | BGA-Bottom-194 |
1 x | DIL8/SOIC8 ZIF MB95-1 |
1 x | BGA-Top-3 ZIF-CS |
1 x | BGA-Bottom-8 |
1 x | BGA-Bottom-135 |
2 x | Tool holder type H for SWH 1-A |
1 x | Top PSOP44 ZIF 600mil |
1 x | DIL40/VQFP64 ZIF AWM-1 |
1 x | BGA-Bottom-212 |
1 x | BGA-Bottom-106 |
1 x | DIL48/PLCC68 ZIF MCS196-2 |
1 x | BGA-Bottom-214 |
2 x | BGA-Bottom-9 |
1 x | BGA-Bottom-222 |
2 x | Inspector mirror |
2 x | Wire strippers 160mm |
1 x | STRIPPING TOOL WITH ADJUSTABLE KNIVES |
3 x | EUROline mini side cutter |
1 x | EUROline set of pliers |
3 x | EUROline mini side cutter |
2 x | Side cutters 160mm |
4 x | Combination pliers 205mm |
3 x | EUROline snipe nose pliers |
4 x | EUROline side cutter rounded head |
4 x | Combination pliers 160mm |
1 x | lathe tools 8mm |
2 x | EUROline flat nose pliers |
2 x | Telephon pliers straight 160mm |
2 x | Round nose pliers 160mm |
2 x | EUROline mini side cutter |
2 x | EUROline mini side cutter |
1 x | magnifier 3.25 x Ø 45mm with additional lens |
1 x | MULTI 200ml |
1 x | Cutting tool HM 20 mm |
1 x | Coarse-toothed blades (No. 3: 34 teeth per 25mm) |
2 x | Milling cutter set (2 - 5mm) |
3 x | Stainless steel brushes |
2 x | Edge cutter with pin 6.4mm |
3 x | V-slot cutter 6.5mm |
1 x | MICRO Heat gun MH 550 |
1 x | DIL48/TQFP48-1 ZIF |
1 x | Lever Dial Indicator |
2 x | High quality corundum grinding bits |
3 x | Tweezer teflon-coated 5-107-9 |
2 x | Tweezer teflon-coated 5-021-9 |
1 x | Insulation Resistance Tester MG500 |
2 x | Insulation Resistance Tester MG125 |
1 x | TIP SPT-2 |
1 x | High quality corundum grinding bits |
1 x | Hand magnifier with LED light 3X |
2 x | TORX-screwdrivers T6 |
1 x | End milling cutter kit HSS 20 pcs |
2 x | Tweezer teflon-coated 5-117-9 |
1 x | ESD Tweezers For The SMD-Technique - 6 Piece Set |
3 x | Half round cutter 13mm |
3 x | 10-piece wood router cutter set |
2 x | Cups brushes |
3 x | Screwdriver 2.5 |
1 x | 3-jaw chuck centrically clamping 125mm |
1 x | High quality corundum grinding bits |
3 x | Slot cutter 6.5mm |
1 x | Core box bit 3.2mm |
2 x | Steel cups |
2 x | Felt polishers |
1 x | MICRO Screwdriver MIS 1. Complete with 16 inserts. |
2 x | Felt polishers |
1 x | Coarse-toothed blades (No. 9: 14 teeth per 25mm) |
2 x | Steel wheels |
1 x | Flat nose pliers 160mm |
2 x | Glass fibre contact cleaner brush |
2 x | Steel brushes |
1 x | Lathe tools 10mm pastilhados |
1 x | DIL3/SOT23-3 ZIF-CS |
2 x | Safety Insulated Phillips Screwdriver 14-631VDE |
1 x | Bottom PSOP44 NOR-3 |
1 x | Titan Tweezers 5-035 |
1 x | Collet chuck ER32 for D250X550 |
1 x | Cross-recess Screwdrivers 1 |
3 x | replacement glass fibre for 2-166 Ø 4mm (PU 10) |
1 x | Cross-recess Screwdrivers 1 |
1 x | High quality corundum grinding bits |
1 x | Titan Tweezers 5-031 |
1 x | Multipurpose Vices Primus 75 |
1 x | Broca de ponto 8.00 x 3.15 |
1 x | DIL32/SOIC32 ZIF 445mil |
1 x | DCGT 070202F-AL |
1 x | MICRO-screwdrivers |
1 x | High quality corundum grinding bits |
1 x | Component tweezers 5-013 |
1 x | Screwdriver 1.0 |
2 x | Component tweezers 5-009 |
1 x | Stainless steel wheels |
2 x | Screwdriver 2.0 |
1 x | Brass contact cleaner brush |
1 x | Stainless steel cups |
1 x | Combi cutter 6.5/2.5mm |
1 x | Brass brushes |
1 x | Slot cutter 3.2mm |
1 x | Safety Insulated Phillips Screwdriver 14-632VDE |
1 x | DIL28W/SOIC28 ZIF 300mil |
1 x | DIL48/TSOP56 ZIF 18.4mm NOR-4 |
2 x | Diamond Grinding Bits 1mm |
2 x | Diamond Cutting Discs |
1 x | Face clamping disc for D250X550 |
2 x | Sanding Discs |
1 x | HSS drill bits 1.0mm |
2 x | Follow rest for D250X550 |
2 x | Insert LGTN-3 |
1 x | Cotton polishers |
2 x | machine base with shelves for D250X550 |
1 x | Felt polishers |
1 x | Ball-shaped diamond coated 2.2mm |
1 x | Wood Lathe DB900 |
1 x | Lathe chuck flange for D250X550 |
1 x | Tungsten carbide drills Ø1mm |
2 x | Sanding Drums |
2 x | Cotton polishers |
1 x | Screwdriver 3.0 |
1 x | Flap Wheels |
1 x | Sanding Discs |
2 x | HSS drill bits 1.6mm |
1 x | TORQUE-SCREWDRIVER 0.5 - 1.5 Nm |
1 x | Conjunto de três brocas de ponto |
1 x | Tungsten carbide drills Ø2mm |
1 x | Tungsten carbide drills Ø1,5mm |
2 x | Safety Insulated Phillips Screwdriver 14-633VDE |
1 x | HSS twist drill set with centring pin |
1 x | Sanding Drums |
1 x | Flap Wheels |
1 x | Diamond Cutting Discs |
1 x | Diamond Cutting Discs |
1 x | Diamond Grinding Bits 1,8mm |
1 x | Steady rest for D250X550 |
1 x | Cotton polishers |
1 x | Glass fibre contact cleaner brush |
1 x | Ball-shaped diamond coated 3.2mm |
1 x | Sanding bands 14x13mm |
1 x | Nylon Fleece Brushes |
1 x | Ball-shaped diamond coated 1.2mm |
![](images/pixel_black.gif) |
€49,064.80 |