€30.89 + VAT

MICROMOT 50/E
[28510]

MICROMOT 50/E

Tested 100,000 times, these units speak for themselves.

The body diameter of only 35 mm makes it easy to handle. The weight of 230 g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design. The high quality steel collets ensure accurate clamping of the cutters. The size of the machine dictates a 12 V drive system, use of a transformer is required. MICROMOT transformers of at least 1 A are recommended.

Milling/Drilling machine MICROMOT 50/E

The thyristor electronic speed control enables the selection of speeds from 5,000 to 20,000 rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds.

The MICROMOT standard 20mm collar allows use in the drill stand MB 140/S, router base OFV, stand UH 34 and angle adapter WS 90.Stable housing of fibreglass reinforced POLYAMIDE. With soft gripping area for extended use during hours.

  • For milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving and more.
  • Useable on any workable material, e.g. steel, precious metals, glass, ceramics, plastics, precious stones etc.
  • Ideal for electronic hobbyists, model builders, tool and die makers, jewellers, opticians, artists, chiropractors, dental technicians and more.
  • 12 V supply allows the safe use of coolant, e.g. when grinding and cutting semi-precious stones!

 .

Six MICROMOT collets for shanks in the range 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm are supplied.

 

Spec.

  • Power consumption is 40 W
  • length 220 mm
  • weight approx. 230 g.
  • body diameter of only 35 mm
  • standard 20mm collar
  • Stable housing of fibreglass reinforced POLYAMIDE

Sold without power supply


Reviews

Customers who bought this product also purchased
Precision Vice FMZ
Precision Vice FMZ
MICROMOT Mains Adapter NG 2/S
MICROMOT Mains Adapter NG 2/S
Metal Cutting Blades
Metal Cutting Blades
Manufacturers
1 x Microfibre polishing wheel, 15-ply (100mm)
2 x EUROline mini side cutter
1 x Machine Vice MS 4
2 x Combination pliers 185mm
1 x Hot wire cutter THERMOCUT 230/E
1 x Special Fused Alumina (Hardness N).
2 x sandpaper for PS 13 Grit 240
1 x Safety insulated screwdrivers 14-604 VDE
1 x Round nose pliers 45º EUROline-Conductive
2 x EUROline set of pliers
1 x Diamond cutting blade for OZI
2 x OPTI BF16 Vario
1 x Combination pliers 210mm
2 x MICRO Miller MF 70
1 x OPTI BF20L VARIO
1 x EUROline round nose pliers
1 x Precision Vice FMZ
1 x Sanding pads for OZI 220/E grit 150
1 x MICROMOT Mains Adapter NG 2/S
1 x EUROline mini side cutter
1 x Tungsten Carbide Tipped (TCT)
1 x sandpaper for PS 13 Grit 400
1 x Super-Cut
1 x MICROMOT Mains Adapter NG 5/E
1 x MICROMOT 50/EF
2 x Precision Vice FMS 75
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Screwdriver 5.5
1 x Safety Insulated Phillips Screwdriver 14-631VDE
1 x Combination pliers 170mm
1 x MICRO Miller FF 500
1 x Supercut jig saw blades of special steel
1 x Safety insulated screwdrivers 14-606 VDE
1 x Safety Insulated Phillips Screwdriver 14-632VDE
1 x Round nose pliers 185mm
1 x Rounding over cutter 6.4mm
1 x Diamond Coated
1 x Cross-recess Screwdrivers 0
1 x 6-piece screwdriver set ESD
1 x Screwdriver 5.5
1 x Flat nose pliers 45º EUROline-Conductive
1 x Diamond blade for MBS 240/E
1 x Precision drill grinder FBS 12/EF
1 x Snipe nose pliers 45º EUROline-Conductive
1 x Sanding pads for OZI 220/E grit 240
1 x OPTI BF20 VARIO
1 x 6-piece screwdriver and cross-recess set
1 x HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x 
1 x Grinding mop cylinder grit 80
1 x Round nose pliers 160mm
1 x Screwdriver 3.0
1 x Antiallergical Tweezers 5-125-1
1 x Professional Drill/Grinder IBS/E
1 x Edge cutter with pin 6.4mm
1 x Core box bit 3.2mm
€9,986.90
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook