€27.23 + VAT

MICROMOT 50
[28500]

MICROMOT 50

Tested 100,000 times, these units speak for themselves.

The body diameter of only 35 mm makes it easy to handle. The weight of 230 g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design. The high quality steel collets ensure accurate clamping of the cutters. The size of the machine dictates a 12 V drive system, use of a transformer is required. MICROMOT transformers of at least 1 A are recommended.

Milling/Drilling machine MICROMOT 50

The MICROMOT standard 20mm collar allows use in the drill stand MB 140/S, router base OFV, stand UH 34 and angle adapter WS 90.Stable housing of fibreglass reinforced POLYAMIDE. With soft gripping area for extended use during hours.

  • For milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving and more.
  • Useable on any workable material, e.g. steel, precious metals, glass, ceramics, plastics, precious stones etc.
  • Ideal for electronic hobbyists, model builders, tool and die makers, jewellers, opticians, artists, chiropractors, dental technicians and more.
  • 12 V supply allows the safe use of coolant, e.g. when grinding and cutting semi-precious stones!

 .

Six MICROMOT collets for shanks in the range 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm are supplied.

 

Spec.

  • Power consumption is 40 W
  • length 220 mm
  • weight approx. 230 g.
  • body diameter of only 35 mm
  • standard 20mm collar
  • Stable housing of fibreglass reinforced POLYAMIDE

Sold without power supply


Reviews

Customers who bought this product also purchased
Tool holder for rotary tools
Tool holder for rotary tools
Manufacturers
1 x Brass brushes
1 x Nylon Fleece Brushes
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Fibre-Cut Discs
1 x Footswitch FS
1 x Diamond blade for MBS 240/E
1 x 10-piece wood router cutter set
1 x Treated muslin polishing wheel, stiff (100 x 15mm)
1 x Grinding mop cylinder grit 120
1 x Replacement cutting disc for MICRO cutter MIC
1 x Super-fine sanding discs grain 2000
1 x Five piece HSS chisel set
1 x Rasp plate with metal burrs made from wolfram carbide for LWS
1 x Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x Blade for Wood and Plastics
1 x Lambswool polishing disc
1 x HSS cutting blade for OZI
1 x Fibre-Cut Discs
1 x Extra narrow bandsaw blade (3.5mm) for tight radii
1 x Fine dust paper filter for CW-matic
1 x Band knife of hardened spring band steel (without teeth)
1 x Edge cutter with pin 6.4mm
1 x Blade for Steel and brass
2 x Telephone pliers bent 165mm
3 x Flat nose pliers 185mm
3 x Round nose pliers 185mm
3 x Round nose pliers 160mm
2 x Telephone pliers bent 205mm
2 x Wire strippers 165mm
3 x Telephon pliers straight 160mm
2 x Telephon pliers bent 160mm
2 x Flat nose pliers 160mm
2 x Side cutters 180mm
3 x Wire strippers 160mm
3 x Combination pliers 170mm
2 x Combination pliers 160mm
1 x Side cutters 160mm
2 x Combination pliers 205mm
3 x Telephone pliers stright 165mm
2 x Side cutters 160mm
1 x Combination pliers 185mm
2 x Wire strippers 160mm
1 x Telephon pliers straight 200mm
2 x Side cutters 170mm
1 x Combination pliers 210mm
1 x Telephon pliers bent 200mm
1 x Side cutters 160mm
3 x Telephone pliers straight 205mm
1 x Combination pliers 185mm
1 x Side cutters 195mm
1 x Wire strippers 165mm
1 x Broca de ponto 3.15 x 1.25
1 x Broca de alta duração de 2.3mm
1 x Broca de ponto 8.00 x 3.15
3 x Telephone pliers bent 205mm
2 x Combination pliers 190mm
1 x Round nose pliers 165mm
1 x Flat nose pliers 165mm
1 x Broca de alta duração de 2.8mm
1 x Half round cutter 13mm
1 x Steel brushes
1 x MICRO Miller FF 500
1 x Felt polishers
1 x Multipurpose Vices Primus 75
1 x Slot cutter 3.2mm
1 x Cotton polishers
1 x Table Saw FET
1 x Cross-recess Screwdrivers 1
1 x Cross-recess Screwdrivers 0
1 x HSS boring tool set, 6 pieces
2 x Hot wire cutter THERMOCUT 12/E
1 x TORX-screwdrivers T5
1 x Super jig saw STS/E
1 x Tungsten carbide cutter 3.0mm
1 x Long neck straight drill/grinder LB/E
1 x Ball shaped milling cutters
1 x Screwdriver 1.5
1 x Precision Vice FMZ
1 x Solid carbide stylus for engraving
1 x Warding files set, 6pcs
1 x Polishing machine PM 100
1 x 2-speed scroll saw DSH
1 x Cone shaped milling cutter
1 x MICRO shaper MP 400
€5,054.29
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook