€30.89 + VAT

MICROMOT 50/E
[28510]

MICROMOT 50/E

Tested 100,000 times, these units speak for themselves.

The body diameter of only 35 mm makes it easy to handle. The weight of 230 g, quiet and effortless drive are due to the special motor. The ground spindle and collar bearing all contribute to the ergonomic design. The high quality steel collets ensure accurate clamping of the cutters. The size of the machine dictates a 12 V drive system, use of a transformer is required. MICROMOT transformers of at least 1 A are recommended.

Milling/Drilling machine MICROMOT 50/E

The thyristor electronic speed control enables the selection of speeds from 5,000 to 20,000 rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds.

The MICROMOT standard 20mm collar allows use in the drill stand MB 140/S, router base OFV, stand UH 34 and angle adapter WS 90.Stable housing of fibreglass reinforced POLYAMIDE. With soft gripping area for extended use during hours.

  • For milling, drilling, routing, de-scaling, polishing, cutting, cleaning, sawing, engraving and more.
  • Useable on any workable material, e.g. steel, precious metals, glass, ceramics, plastics, precious stones etc.
  • Ideal for electronic hobbyists, model builders, tool and die makers, jewellers, opticians, artists, chiropractors, dental technicians and more.
  • 12 V supply allows the safe use of coolant, e.g. when grinding and cutting semi-precious stones!

 .

Six MICROMOT collets for shanks in the range 1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm are supplied.

 

Spec.

  • Power consumption is 40 W
  • length 220 mm
  • weight approx. 230 g.
  • body diameter of only 35 mm
  • standard 20mm collar
  • Stable housing of fibreglass reinforced POLYAMIDE

Sold without power supply


Reviews

Customers who bought this product also purchased
MICROMOT Mains Adapter NG 2/S
MICROMOT Mains Adapter NG 2/S
Metal Cutting Blades
Metal Cutting Blades
Precision Vice FMZ
Precision Vice FMZ
Manufacturers
1 x Replacement belts for BSL 220/E
2 x PRECISION WIRE STRIPPER ESD-PLUS
1 x Broca de alta duração de 3.0mm
1 x High quality corundum grinding bits
1 x SPRAYOIL 200ml
1 x Collet chuck ER32 for D250X550
1 x Sanding Drums
2 x High quality corundum grinding bits
2 x Cutting tool 10 mm
2 x Sanding bands 14x13mm
2 x High quality corundum grinding bits
2 x Broca de alta duração de 2.8mm
2 x Tungsten carbide cutter 2.0mm
1 x Wolfram vanadium steel milling bits
2 x Lathe tools 10mm pastilhados
1 x Broca de alta duração de 2.2mm
1 x Lathe System PD 400
1 x Cotton polishers
2 x FLUX-OFF 400ml
1 x Cutting disc, with reinforcement
1 x Quick-action tool holder kit SWH AA
1 x Corundum grinding disc for LWS
1 x Replacement belts for BSL 220/E
1 x replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x VIDEOCLEAN 200ml
1 x magnifier 3.25 x Ø 45mm with additional lens
1 x Broca de alta duração de 2.9mm
1 x MICROMOT 50/E
1 x Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x Broca de alta duração de 2.3mm
1 x Solid carbide stylus for engraving
1 x High quality corundum grinding bits
1 x Collet chuck ER25 for D250X550
1 x High quality corundum grinding bits
1 x High quality corundum grinding bits
1 x POLISHER 200ml
1 x Coarse-toothed (18 TPI per 25mm)
1 x Super-fine sanding discs grain 400
1 x Professional set for finish grinding and polishing
1 x High quality corundum grinding bits
1 x Precision quick-action drill chuck 0-13mm B16
1 x Protective device for hand-operated MICROMOT
1 x Blade holders for DS 460
1 x Broca de alta duração de 2.4mm
1 x Fibre-Cut Discs
1 x Corundum grinding disc for LWS
1 x PROLUB 200ml
1 x FREEZER-TOP 200ml
1 x 4-jaw chuck individually clamping 125mm
2 x Coarse-toothed (10 TPI per 25mm)
2 x Precision quick-action drill chuck 0-10mm B16
2 x MULTI 200ml
2 x High quality corundum grinding bits
2 x 3-jaw chuck centrically clamping 125mm
2 x Professional polishing sponge
2 x Steel brushes
2 x STRIPPING TOOL WITH ADJUSTABLE KNIVES
2 x MICROMOT drill stand MB 200
2 x Collet Set for accurate use on round components
2 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
4 x Fibre-Cut Discs
2 x Flap Wheels
2 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
2 x Broca de alta duração de 2.1mm
2 x Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x Cotton polishers
2 x Chuck for TBM 220
2 x CRIMPING PLIERS/WIRE STRIPPER
2 x SCREEN 200ml
2 x ESD Tweezers For The SMD-Technique - 6 Piece Set
2 x Felt polishers
1 x quantum revolving center CM2
2 x Tungsten carbide cutter 3.0mm
1 x 10-piece wood router cutter set
1 x Coarse-toothed (25 TPI per 25mm)
€4,742.69
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook