Top » Catalog » Micromot tools » ACCESSORIES » Mains adaptor » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	MICROFLAME burner MFB/E
Spare cutting wire	Replacement cutting wire for the THERMOCUT 12/E	Hot wire cutter THERMOCUT 12/E

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Collet Set for accurate use on round components
2 x	Mill/Drill Unit BFB 2000.
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Sanding Drums
1 x	High quality corundum grinding bits
3 x	Dividing attachment TA 230 for PF 250
2 x	High quality corundum grinding bits
1 x	Fibre-Cut Discs
1 x	Centre Turning Attachment
1 x	HSS twist drill set with centring pin
1 x	Tool holder for rotary tools
3 x	Felt polishers
1 x	Diamond-coated cutting disc for MIC
2 x	Fibre-Cut Discs
1 x	MICROMOT drill stand MB 200
2 x	Wolfram vanadium steel milling bits
1 x	Aluminium Die-Cast
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Flexible polishing pad set
2 x	Sanding Discs
1 x	Fibre-Cut Discs
1 x	Replacement belts for BSL 220/E
1 x	Tungsten carbide cutters set
1 x	Polishing felt, medium hard
1 x	MICRO Heat gun MH 550
1 x	Insulation Resistance Tester MG500
1 x	Hot wire cutter THERMOCUT 650
2 x	Metal Cutting Blades
2 x	HSS drill bits 1.6mm
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Super-Cut
1 x	HSS drill bits 0.5mm
2 x	Backing disc for LWS
1 x	Core box bit 3.2mm
2 x	Flexible polishing pad set
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
2 x	Sanding Discs
2 x	sanding belts for BBS/s Grit 150
1 x	HSS cutting blade for OZI
1 x	Professional set for finish grinding and polishing
1 x	Nylon Fleece Brushes
1 x	Stainless steel cups
1 x	Corundum grinding disc for LWS
1 x	Slot cutter 3.2mm
1 x	Replacement glue sticks for HKP 220
2 x	Corundum fan sander for LWS
2 x	Flap Wheels
1 x	Diamond cutting blade for OZI
1 x	Cups brushes
1 x	Corundum sanding discs for LWS
2 x	sanding belts for BBS/s Grit 240
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Tungsten carbide drills Ø2mm
1 x	High quality corundum grinding bits
1 x	Corundum fan sander for LWS
1 x	Three-jaw steel drill chuck
2 x	Flap Wheels
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Diamond Grinding Bits 1,8mm
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Super-fine sanding discs grain 2000
2 x	Blade guides separately
1 x	Diamond Twist Drills
1 x	Corundum grinding disc for LWS
1 x	sandpaper for PS 13 Grit 240
1 x	Conjunto de três brocas de ponto
1 x	Microfibre cloth
3 x	Steel brushes
2 x	Steel cups
1 x	HSS drill bits 1.0mm
2 x	Diamond Grinding Bits 5mm
2 x	Fibre-Cut Discs
1 x	Super-fine sanding discs grain 000
1 x	14-piece parallel supports set
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x	Slot cutter 5.0mm
1 x
1 x	sandpaper for PS 13 Grot 180
1 x	Felt polishers
1 x	Diamond Cutting Discs
1 x	Brass brushes
1 x	Diamond Cutting Discs
1 x	Slot cutter 6.5mm
1 x	Footswitch FS
2 x	Thicknesser DH 40
1 x	Silicon-Carbide.
2 x	Flexible silicon discs
1 x	Sanding pads for OZI 220/E grit 240
1 x	Ball-shaped diamond coated 2.2mm
1 x	MICROMOT tool holder
1 x	Flexishaft MICROMOT 110/BF
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	MICRO Miller FF 230
1 x	Tungsten carbide cutter 3.0mm
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	MICRO Miller MF 70
1 x	Steel wheels
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Ball shaped milling cutters
1 x	Special Fused Alumina (Hardness N).
1 x	Flame shaped milling cutters
1 x	Replacement belts for BSL 220/E
1 x	Fibre-Cut Discs
2 x	Four Jaw Chuck
1 x	Set of special steel cutters
2 x	Diamond Grinding Bits 1mm
1 x	Corundum sanding discs for LWS
1 x	Compact workshop vacuum cleaner CW-matic
2 x	Edge cutter with pin 6.4mm
1 x	Flexible silicon discs
1 x	Cut off/mitre saw KGS 80
1 x	High quality corundum grinding bits
1 x	Supercut jig saw blades of special steel
1 x	Grinding mop cylinder grit 240
1 x	2-speed scroll saw DSH
1 x	Grinding and Polishing Machine SP/E
1 x	Ball-shaped diamond coated 3.2mm
1 x	Lambswool polishing disc
1 x	Angle cutter 45 °
1 x	Fluted filter for CW-matic
1 x	Grinding mop cylinder grit 120
1 x	Sanding Drums
1 x	Ball-shaped diamond coated 1.2mm
1 x	Replacement belts for BSL 220/E
1 x	Lathe System PD 400
1 x	Sanding bands 14x13mm
1 x	Sanding pads for OZI 220/E grit 150
1 x	Diamond Grinding Bits 1,8mm
1 x	Bench drill press TBH
1 x	Professional polishing sponge
1 x	Gear Chuck
1 x	Sanding pads for OZI 220/E grit 80
1 x	Replacement belts for BSL 220/E
1 x	3-jaw chuck centrically clamping 125mm
1 x	Sanding fleece for LWS
1 x	Stainless steel wheels
1 x	Cone shaped milling cutter
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Universal and oil siphoning pump AP 12
1 x	HSS immersion saw blades for OZI
1 x	Engraving tool GG
1 x	Five piece HSS chisel set
1 x	Jig saw blades made of HSS
1 x	Blade for Steel and brass

€8,554.40