Top » Catalog » Micromot tools » ACCESSORIES » Mains adaptor » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Replacement cutting wire for the THERMOCUT 12/E
Hot wire cutter THERMOCUT 12/E	Hot wire cutter THERMOCUT 230/E	MICROFLAME burner MFB/E

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	MICROMOT 50/E
1 x	Long neck straight drill/grinder LB/E
1 x	MICRO Heat gun MH 550
2 x	Belt sander BS/E
1 x	Belt sander BBS/S
1 x	Blade for Wood and Plastics
2 x	sanding belts for BBS/s Grit 240
1 x	Bench Circular Saw KS 230
1 x	sclcr2525M12
1 x	Crosscut 'Super-Cut' blade
1 x	Backing disc for LWS
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	HSS boring tool set, 6 pieces
1 x	Bench drill machine TBM 220
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Chuck for TBM 220
1 x	Mill/Drill System BFW 40/E
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Diamond Grinding Bits 1,8mm
2 x	MICROMOT glue gun HKP 220
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Corundum bound cutting disc for LWS
1 x	Saw blade made of high-alloy special steel
1 x	Long neck angle grinder LHW
1 x	Edge cutter with pin 6.4mm
1 x	Special Fused Alumina (Hardness N).
1 x	MICROFLAM gas soldering set MGS
1 x	Ball-shaped diamond coated 1.2mm
1 x	Set of precision cutters
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Polishing Set
1 x	HSS immersion saw blades for OZI
1 x	Diamond Twist Drills
1 x	Flexishaft MICROMOT 110/P
1 x	Diamond Cutting Discs
1 x	Hot wire cutter THERMOCUT 650
1 x	Diamond Grinding Bits 1,8mm
1 x	BIT-SET
1 x	Super-fine sanding discs grain 2000
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Delta sander OZI/E
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Core box bit 3.2mm
1 x	Tungstein carbide rasp - and cutting disc
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	MICROFLAME burner MFB/E
1 x	Half round cutter 13mm
1 x	Diamond-coated cutting disc for MIC
1 x	SCLCR1010E06

€1,858.63