Top » Catalog » Micromot tools » ACCESSORIES » Accessories for THERMOCUT 12/E » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 12/E
Hot wire cutter THERMOCUT 230/E	MICROFLAME burner MFB/E	Spare cutting wire

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Flat nose pliers 165mm
1 x	DIL44/MLF44-1 ZIF-CS
1 x	Solid carbide saw blade
2 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Diamond Coated
1 x	DIL40/TQFP44 ZIF AWM-1
2 x	MICROMOT steel collet set
2 x	Angle cutter 45 °
1 x	Sanding fleece for LWS
3 x	Replacement glue sticks for HKP 220
1 x	Edge cutter with pin 6.4mm
1 x	Sanding pads for OZI 220/E grit 80
2 x	Corundum fan sander for LWS
3 x	Step clamps made of steel
1 x	DIL48/TQFP100 ZIF ST92Fxxx
1 x	Super-fine sanding discs grain 000
1 x	Diamond blade
2 x	Diamond-coated cutting and roughing disc
1 x	Silicon-Carbide.
1 x	14-piece parallel supports set
1 x	Diamond Twist Drills
1 x	Sanding Discs
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Router base OFV
3 x	Chuck for TBM 220
1 x	Replacement belts for BSL 220/E
1 x	Screwdriver bit set. 49-piece.
1 x	DIL32/PLCC84 ZIF HS3334ESCF1H
1 x	Broca de alta duração de 0.7mm
1 x	Fine dust paper filter for CW-matic
1 x	Five piece HSS chisel set
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	DIL28/TSSOP28 ZIF 170mil
3 x	Centre Turning Attachment
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	DIL40/TQFP64 ZIF CC-1
1 x	Gear Chuck
1 x	Micro Compound Table KT 70
1 x	Multipurpose Vices Primus 75
1 x	Dividing attachment TA 230 for PF 250
1 x	Super-fine sanding discs grain 2000
1 x	HSS drill bits 0.8mm
3 x	Tungsten Carbide Tipped (TCT)
1 x	Professional set for finish grinding and polishing
1 x	Rounding over cutter 6.4mm
1 x	DIL40/PLCC44 ZIF W-EPROM / MCS51
1 x	Slot cutter 6.5mm
1 x	Tungsten carbide drills Ø1mm
1 x	MICRO woodturning lathe DB 250
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Corundum bound cutting disc for LWS
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Flap Wheels
1 x	DIL20W/PLCC20 ZIF
1 x	DIL40/PLCC44 ZIF PIC-1
1 x	DIL32/PLCC32 ZIF-CS
1 x	2-speed scroll saw DSH
1 x	Polishing Set
1 x	Core box bit 3.2mm
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Saw blade made of high-alloy special steel
1 x	Combi cutter 6.5/2.5mm
1 x	Corundum sanding discs for LWS
1 x	MICRO shaper MP 400
3 x	Fluted filter for CW-matic
1 x	Rebating cutter 6.4mm
1 x	Crosscut 'Super-Cut' blade
1 x	Slot cutter 5.0mm
1 x	Replacement carving blades for MSG
1 x	DIL48/LQFP64 ZIF M38039/M39049
1 x	DIL40/MLF64 ZIF-CS AVR-1
1 x	HSS boring tool set, 6 pieces
1 x	Universal and oil siphoning pump AP 12
2 x	Grinding mop cylinder grit 80
1 x	DIL32/PLCC32 ZIF-CS NOR-1
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Compact workshop vacuum cleaner CW-matic
1 x	DIL32/SDIP64-1 ZIF Toshiba-BM1136
1 x	Sanding pads for OZI 220/E grit 150
1 x	sanding belts for BBS/s Grit 240
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
2 x	Pensander PS 13
1 x	Footswitch FS
1 x	DIL44/TQFP44-1 Zif
1 x	DIL24/TSSOP24 ZIF 170mil
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	DIL40/PLCC52 ZIF AWM-1
2 x	Independent four jaw chuck for the DB 250
1 x	Professional polishing sponge
1 x	Engraving tool GG
1 x	sandpaper for PS 13 Grit 400
1 x
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	DIL40/TQFP44 ZIF EM652X
1 x	Fibre-Cut Discs
1 x	Corundum grinding disc for LWS
1 x	Milling cutter set (6 - 10mm)
1 x	Sanding Drums
1 x	Brass contact cleaner brush
1 x	Universal polishing paste
1 x	Disc Sander TG 125/E
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	MICROMOT extension cord. 300cm.
1 x	Sanding fleece for LWS
1 x	Cut off/mitre saw KGS 80
1 x	Sanding Drums
1 x	Table Saw FET
1 x	HSS twist drill set with centring pin
1 x	MICRO cutter MIC
1 x	Corundum fan sander for LWS
1 x	Flexible polishing pad set
1 x	DIL32/SDIP32 ZIF 400mil
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Sanding pads for OZI 220/E grit 240
1 x	DIL44/TQFP44-3 ZIF
1 x	sandpaper for PS 13 Grit 240
1 x	DIL32/MLF32-1 ZIF
1 x	Three-jaw steel drill chuck
1 x	Tungsten tipped saw blade
1 x	Aluminium Die-Cast
1 x	Super-Cut
1 x	Collet Set for accurate use on round components
1 x	Fibre-Cut Discs
1 x	Bandsaw blade of bimetal for MBS 240/E
1 x	DIL40/TQFP64 ZIF EM652X
1 x	DIL42/SDIP42 ZIF 600mil
1 x	10-piece wood router cutter set

€8,135.60