Top » Catalog » Micromot tools » ACCESSORIES » Accessories for THERMOCUT 12/E » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 12/E
Hot wire cutter THERMOCUT 230/E	MICROFLAME burner MFB/E	Spare cutting wire

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	6-piece screwdriver and cross-recess set ESD
1 x	Sanding Discs
2 x	High quality corundum grinding bits
2 x	Stainless steel wheels
2 x	Felt polishers
2 x	Flexible silicon discs
2 x	High quality corundum grinding bits
3 x	Flexible silicon discs
2 x	Polishing paste
2 x	Set of special steel cutters
2 x	High quality corundum grinding bits
2 x	Cotton polishers
2 x	magnifier 3.25 x Ø 45mm with additional lens
2 x	Cylinder shaped milling cutters
2 x	Telephone pliers bent 205mm
2 x	Felt polishers
2 x	Cone shaped milling cutter
2 x	Stainless steel cups
1 x	Steel cups
1 x	MICRO cutter MIC
1 x	Belt sander BBS/S
1 x	Cups brushes
1 x	Wolfram vanadium steel milling bits
1 x	Solid carbide stylus for engraving
1 x	Cylindrical cutters
1 x	Tungsten carbide cutters set
1 x	Brass brushes
1 x	Cotton polishers
1 x	Cotton polishers
1 x	Flexible silicon discs
1 x	Wolfram vanadium steel milling bits
1 x	High quality corundum grinding bits
1 x	Steel brushes
1 x	Wheels brushes
1 x	Tungstein carbide rasp - and cutting disc
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Polishing Set
1 x	Silicon-Carbide.
1 x	Tungsten Carbide Tipped (TCT)
1 x	Pinça SOIC de 8 pinos
1 x	Machine Vice MS 4
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Microfibre cloth
1 x	Sanding pads for OZI 220/E grit 80
1 x	Professional set for finish grinding and polishing
1 x	Sanding fleece for LWS
2 x	Fluted filter for CW-matic
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Fine dust paper filter for CW-matic
1 x	Replacement cutting disc for MICRO cutter MIC
3 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Corundum sanding discs for LWS
1 x	Special Fused Alumina (Hardness N).
1 x	Safety Insulated Pozidriv Screwdriver 14-642VDE
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Replacement belts for BSL 220/E
1 x	BGA-Bottom-229
1 x	Ball-shaped diamond coated 2.2mm
1 x	Half round cutter 13mm
1 x	3-jaw chuck centrically clamping 100mm
1 x	Flexishaft MICROMOT 110/P
1 x	BGA-Top-4 ZIF-CS
1 x	Four Jaw Chuck
1 x	Replacement carving blades for MSG
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Cutting tool 8 mm
1 x	Backing disc for LWS
1 x	BGA-Bottom-148
1 x	Aluminium Die-Cast
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Complete Engraving Kit with trial glass
1 x	Angle cutter 45 °
1 x	BGA-Bottom-131
1 x	BGA-Bottom-88
1 x	BGA-Bottom-231
1 x	BGA-Top-3 ZIF-CS
1 x	BGA-Bottom-5
1 x	BGA-Bottom-132
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Precision quick-action drill chuck 0-10mm B16
1 x	BGA-Bottom-11
1 x	Safety Insulated Phillips Screwdriver 14-632VDE
1 x	End milling cutter kit HSS 12 pcs
1 x	Precision magnetic gauge stand
1 x	Combination pliers 160mm
1 x	MICROMOT Mains Adapter NG 5/E
1 x	DIL18W/SOIC18 ZIF 300mil
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Cutter head for copy and surface milling MT2
1 x	4-jaw chuck individually clamping 80mm
2 x	3-jaw chuck centrically clamping 125mm
1 x	CM2 - B16 - M10
1 x	Digital caliper gauge 300 mm
1 x	Quick-action tool holder kit SWH AA
1 x	Tool holder type H for SWH 1-A
1 x	4-jaw chuck individually clamping 125mm
1 x	MICROMOT Mains Adapter NG 2/S
1 x	DIL20/SOIC20 ZIF 200mil
1 x	centrically clamping 125mm
1 x	Bottom PSOP44 NOR-3
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Wire strippers 160mm
1 x	BGA-0246/0244
1 x	DIL24/QSOP24 ZIF 150mil
1 x	BGA-Bottom-105
1 x	Delta sander OZI/E
1 x	BGA-Bottom-102
1 x	Precision quick-action drill chuck 0-8mm B16
1 x	Cutting tool 16 mm
1 x	BGA-Bottom-1
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	BGA-Bottom-106
1 x	Bottom PSOP44 NOR-2
1 x	Morse taper MT2 - B16

€6,277.64