Top » Catalog » Micromot tools » ACCESSORIES » Accessories for THERMOCUT 12/E » 28704

€56.00 + VAT

MICROMOT Mains Adapter NG 5/E
[28704]

MICROMOT Mains Adapter NG 5/E

In compact NORYL casing (recommended for transformers). With superior capacity of 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Master switch for turning off transformer without needing to unplug. Red LED indicates "ready". PTC protection against overload (plugged-in machine will not restart automatically). Modern design with storage holes for tools with 2.35 mm and 3 mm shafts. Foldable tool rest provides a secure place for keeping the MICROMOT tool at the ready.

Technical Data:
Capacity: 5.0 A at 16 Volt no load and 12 Volt under load = 60 VA (DC). Primary supply 220/240 Volt. Thyristor electronic speed control (with feedback) for optimum tool speed and high torque at low speeds. 3 polarised sockets for MICROMOT machines. 1 pair of sockets for standard banana plugs (4 mm diameter).

Reviews

Customers who bought this product also purchased

MICRO Screwdriver MIS 1. Complete with 16 inserts.	MICROMOT extension cord. 300cm.	Hot wire cutter THERMOCUT 230/E
MICROFLAME burner MFB/E	Spare cutting wire	Replacement cutting wire for the THERMOCUT 12/E

Categories

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

3 x	IC tweezers
3 x	Angle cutter 45 °
1 x	Grinding mop cylinder grit 120
3 x	Blade for Wood and Plastics
1 x	Multipurpose Vices Primus100
4 x	Band knife of hardened spring band steel (without teeth)
2 x	Grinding mop cylinder grit 80
3 x	Bandsaw blade of bimetal for MBS 240/E
3 x	Blade guides separately
1 x	Edge cutter with pin 6.4mm
1 x	Fixed Steady
1 x	Core box bit 3.2mm
2 x	Blade for Steel and brass
1 x	Gear Chuck
1 x	Screwdriver 3.0
1 x	Multiform grindstone
2 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Three jaw chuck for the lathe DB 250
2 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	14-piece parallel supports set
1 x	Screwdriver 2.5
1 x	Micro Compound Table KT 70
1 x	Precision steel vice PM 40
2 x	Replacement belts for BSL 220/E
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Precision Vice FMZ
2 x	Lathe System PD 400
1 x	Screwdriver 2.5
2 x	Precision lathe PD 250/E
3 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	MICROMOT steel collet set
1 x	Multipurpose Vices Primus 75
1 x	Broca de alta duração de 0.7mm
2 x	Saw blade made of high-alloy special steel
2 x	Rounding over cutter 6.4mm
2 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Grinding mop cylinder grit 120
1 x	Independent four jaw chuck for the DB 250
1 x	Replacement belts for BSL 220/E
1 x	Aluminium Die-Cast
2 x	V-slot cutter 6.5mm
1 x	Ball-shaped diamond coated 3.2mm
1 x	Broca de alta duração de 1.3mm
1 x	Four Jaw Chuck
2 x	Slot cutter 3.2mm
1 x	Screwdriver 2.0
1 x	Dividing attachment TA 230 for PF 250
2 x	Belt sander BBS/S
1 x	Fluted filter for CW-matic
1 x
1 x	Magnetic base
2 x	10-piece wood router cutter set
3 x	PLCC Extractor
1 x	Flexishaft MICROMOT 110/P
1 x	Belt sander BS/E
2 x	Combi cutter 6.5/2.5mm
1 x	Five piece HSS chisel set
1 x	Bench drill machine TBM 220
1 x	Precision Vice FMS 75
2 x	Safety insulated screwdrivers 14-606 VDE
1 x	Flexishaft MICROMOT 110/BF
1 x	Ball-shaped diamond coated 1.2mm
2 x	Three piece thread cutting set
1 x	Replacement carving blades for MSG
2 x	Slot cutter 5.0mm
2 x	PLCC Puller
2 x	Slot cutter 6.5mm
1 x	Safety insulated screwdrivers 14-601 VDE
1 x	MICROMOT tool holder
1 x	Footswitch FS
1 x	Crosscut 'Super-Cut' blade
1 x	Protective device for hand-operated MICROMOT
1 x	Ball shaped milling cutters
1 x	Screwdriver 1.5
2 x	Replacement belts for BSL 220/E
2 x	Half round cutter 13mm
1 x	Bench drill press TBH
1 x	Safety insulated screwdrivers 14-608 VDE
1 x	Tungsten tipped saw blade
1 x	Screwdriver 3.0
1 x	Mill/Drill Unit BFB 2000.
3 x	Safety insulated screwdrivers 14-602 VDE
2 x	HSS boring tool set, 6 pieces
1 x	Solid carbide saw blade
1 x	Machine Vice MS 4
1 x	Safety insulated screwdrivers 14-603 VDE
1 x	Centre Turning Attachment
1 x	Backing disc for LWS
1 x	Diamond blade for MBS 240/E
1 x	Self-adhesive white corundum sanding discs for TG 125/E
1 x	Radius Cutting Attachment, complete with pointed tool
1 x	Safety insulated screwdrivers 14-604 VDE
1 x	Sanding fleece for LWS
1 x	6-piece TORX-screwdriver-set ESD
1 x	Super-fine sanding discs grain 000
1 x	MICROMOT 230/E
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Tungsten carbide drills Ø1mm
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	MICROMOT 50/E
1 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x	Side cutters EUROline-Conductive
1 x	Professional Drill/Grinder IBS/E
1 x	MICRO Miller MF 70
1 x	ESD Brushe
1 x	6-piece wrench key set ESD
1 x	Super-Cut
1 x	ESD Tweezers 5-195
1 x	End side cutters EUROline-Conductive
1 x	Step clamps made of steel
1 x	MICRO Miller FF 230
1 x	Engraving tool GG
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Universal and oil siphoning pump AP 12
1 x	Mill/Drill System BFW 40/E
1 x	Brass contact cleaner brush

€11,433.34