Top » Catalog » Micromot tools » Cutting machine » 28534

€47.50 + VAT

Jig saw STS 12/E
[28534]

Ideal for curved sawing of wood (up to 10mm), printed circuit boards (up to 3mm), and non-ferrous metal (up to 2.5mm).

Powerful special low noise DC motor with high life expectancy. Variable speed control with feedback effect (high engine power in the lower speed range). Housing of glass-fibre reinforced POLYAMIDE. With additional ball adapter for working on convex and concave surfaces. Is exchanged for the normal saw table by unscrewing a screw. Includes 2 saw blades (coarse and fine). We recommend MICROMOT mains adapters as of 2.0A for operation.

Technical data:
Direct voltage 12 - 18V. Maximum power consumption 100W. Stroke 6mm (adjustable from 2,000 - 5,000rpm). Length 180mm. Weight 480g.

Reviews

Customers who bought this product also purchased

sandpaper for PS 13 Grit 240	Flap Wheels	Corundum grinding disc for LWS
sandpaper for PS 13 Grot 180	Flap Wheels	Rasp plate with metal burrs made from wolfram carbide for LWS

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	MICROMOT 50/E
1 x	Long neck straight drill/grinder LB/E
1 x	MICRO Heat gun MH 550
2 x	Belt sander BS/E
1 x	Belt sander BBS/S
2 x	Blade for Wood and Plastics
2 x	sanding belts for BBS/s Grit 240
1 x	Bench Circular Saw KS 230
1 x	sclcr2525M12
1 x	Crosscut 'Super-Cut' blade
1 x	Backing disc for LWS
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	HSS boring tool set, 6 pieces
1 x	Bench drill machine TBM 220
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Chuck for TBM 220
1 x	Mill/Drill System BFW 40/E
1 x	Band knife of hardened spring band steel (without teeth)
2 x	Diamond Grinding Bits 1,8mm
2 x	MICROMOT glue gun HKP 220
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Corundum bound cutting disc for LWS
1 x	Saw blade made of high-alloy special steel
1 x	Long neck angle grinder LHW
1 x	Edge cutter with pin 6.4mm
1 x	Special Fused Alumina (Hardness N).
1 x	MICROFLAM gas soldering set MGS
1 x	Ball-shaped diamond coated 1.2mm
1 x	Set of precision cutters
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Polishing Set
1 x	HSS immersion saw blades for OZI
1 x	Diamond Twist Drills
1 x	Flexishaft MICROMOT 110/P
2 x	Diamond Cutting Discs
1 x	Hot wire cutter THERMOCUT 650
1 x	Diamond Grinding Bits 1,8mm
1 x	BIT-SET
1 x	Super-fine sanding discs grain 2000
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Delta sander OZI/E
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
1 x	Core box bit 3.2mm
1 x	Tungstein carbide rasp - and cutting disc
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	MICROFLAME burner MFB/E
1 x	Half round cutter 13mm
1 x	Diamond-coated cutting disc for MIC
1 x	SCLCR1010E06
1 x	Lambswool polishing disc
1 x	MICRO Miller FF 230
1 x	Blade guides separately
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Micro Compound Table KT 70
1 x	Tungsten carbide cutter 3.0mm
1 x	MICROMOT 50/EF
1 x	Footswitch FS
1 x	Cylinder sander WAS/E
2 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Diamond Grinding Bits 1mm
1 x	Corundum fan sander for LWS
1 x	Bench drill press TBH
1 x	Sanding fleece for LWS
1 x	Polishing machine PM 100
1 x	Solid carbide stylus for engraving
1 x	Cutting disc, with reinforcement
1 x	Coarse-toothed (25 TPI per 25mm)
1 x	Tungsten carbide cutter 1.0mm
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Universal holder UHZ
1 x	Replacement carving blades for MSG
1 x	Router base OFV
1 x	Slot cutter 6.5mm
1 x	Engraving tool GG
2 x	MICRO Miller FF 500
1 x	Disc Sander TG 125/E

€7,474.15