€499.00 + VAT

Thicknesser DH 40
[27040]

Thicknesser DH 40


Load bearing components are all made of die-cast aluminium, with milled seats for bearings and spindles.

These characterics are essential for vibration-free, smooth thicknessing of soft and hard woods. Triple-spindled table (of die-cast aluminium, flat-milled) which can be accurately adjusted to 1/10mm by handwheel (zero adjustable). Automatic even feed with anti-kickback device: The knurled, spring-mounted infeed roller transports even irregularly shaped work pieces. A rubber-coated outfeed roller prevents marking the newly planed surface. Precision planer block with two HSS planer blades.


 
Technical data:
220 - 240V. 200W. 50/60Hz. Thicknessing up to 40mm thick and up to 80mm wide. Maximum depth of cut 0.8mm. Cutter speed 6,000rpm. Feed rate 4.8m/ min. Table length 232mm. Weight approx. 8kg.


 

Reviews

Manufacturers
1 x TOP-PIN 200ml
1 x Insulation Resistance Tester MG125
2 x Broca de alta duração de 2.9mm
5 x Broca de alta duração de 1.0mm
6 x Broca de alta duração de 1.5mm
6 x Broca de alta duração de 2.5mm
1 x EUROline top cutter
6 x Broca de alta duração de 2.0mm
1 x EUROline snipe nose pliers
6 x broca de alta duração de 0,2mm
1 x EUROline side cutter rounded head
1 x Super-fine sanding discs grain 000
1 x EUROline-Conductive set of pliers
5 x Broca de alta duração de 1.1mm
1 x Grinding mop cylinder grit 120
5 x Broca de alta duração de 1.3mm
1 x Professional set for finish grinding and polishing
1 x Inpection mirror 1-978
1 x Handy 1515
1 x Cylinder sander WAS/E
1 x Lever Dial Indicator
1 x Glass fibre contact cleaner brush
5 x broca de alta duração de 0,6mm
5 x Broca de alta duração de 0.3mm
1 x Bench drill press TBH
1 x Mini side cutters EUROline-Conductive
1 x Professional Drill/Grinder IBS/E
1 x Grinding mop cylinder grit 120
1 x Flat nose pliers 45º EUROline-Conductive
1 x MICROMOT 50
1 x Diamond-coated cutting and roughing disc
6 x Broca de alta duração de 1.4mm
1 x Flat nose pliers 185mm
1 x Grinding mop cylinder grit 240
1 x MICRO Miller FF 500
1 x Flat nose pliers 160mm
1 x Mini side cutters EUROline-Conductive
1 x Inspector mirror
5 x Broca de alta duração de 2.1mm
1 x MICRO Miller MF 70
1 x MICROMOT 50/E
2 x IC tweezers
1 x magnifier 3.25 x Ø 45mm with additional lens
5 x Broca de alta duração de 2.4mm
5 x Broca de alta duração de 0.5mm
6 x Broca de alta duração de 2.3mm
1 x Long neck straight drill/grinder LB/E
1 x PLCC Extractor
1 x Tungstein carbide rasp - and cutting disc
4 x Broca de alta duração de 0.4mm
1 x Precision caliper square
1 x Precision drill grinder FBS 12/EF
1 x Steel tape measure
1 x Long neck angle milling/drilling unit LWB 220/E
1 x Corundum fan sander for LWS
1 x Bench drill machine TBM 220
1 x PLCC Puller
1 x Grinding mop cylinder grit 80
1 x Precision magnetic gauge stand
1 x Flat nose pliers 165mm
6 x Broca de alta duração de 0.9mm
1 x Magnetic base
5 x Broca de alta duração de 0.7mm
1 x Precision caliper 500mm
1 x Floor cover ESD
1 x Digital caliper gauge 300 mm
2 x Warding files set, 6pcs
6 x Broca de alta duração de 1.2mm
5 x Broca de alta duração de 0.8mm
1 x Hand Magnifier 2-293
1 x Hand magnifier with LED light 3X
1 x MICRO Miller FF 230
1 x MICROMOT 230/E
1 x Precision Drill/Grinder FBS 240/E
1 x MICROMOT 50/EF
1 x Dial gauge
1 x Glass fibre contact cleaner brush
1 x Mill/Drill System BFW 40/E
1 x STRIPPING TOOL WITH ADJUSTABLE KNIVES
1 x Conjunto de três brocas de ponto
1 x Crimping plier for BNC
1 x CRIMPING PLIERS/WIRE STRIPPER
3 x Broca de alta duração de 2.2mm
1 x ESD-handling set
1 x Broca de ponto 6.30 x 2.50
1 x Broca de ponto 3.15 x 1.25
1 x ESD-handling ser 9-361
1 x Broca de ponto 5.00 x 2.00
1 x ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x Broca de ponto 8.00 x 3.15
1 x Broca de ponto 3.15 x 1.00
1 x CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x Broca de alta duração de 3.0mm
1 x Broca de alta duração de 2.7mm
1 x Broca de alta duração de 2.6mm
1 x Broca de alta duração de 2.8mm
1 x MICRO cutter MIC
1 x Thicknesser DH 40
1 x Table Saw FET
1 x MICRO Band Saw MBS 240/E
1 x MICRO shaper MP 400
1 x Surface planer AH 80
1 x Bench Circular Saw KS 230
1 x Motor-driven carving device MSG
1 x Cut off/mitre saw KGS 80
€9,292.02
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
We Accept
Manufacturer Info
PROXXON
PROXXON Homepage
Other products
Languages
Portugues English
Share Product
Share on Facebook