Top » Catalog » Micromot tools » Precision Lathe » 24002

€1,060.00 + VAT

Precision lathe PD 250/E
[24002]

Precision lathe PD 250/E For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening the mill/drill head PF 230. Centre distance 250mm. Swing 70mm. Height over cross slide 46mm. Machine bed: Of cast iron, wide-legged shape and prism slides. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230. Covered lead spindle. Headstock: Of die-cast aluminium. Precision bearing mounted main spindle (run-out without chuck 1/100mm) with 10.5mm opening. Chuck side 70mm hollowed to 14mm. With MK 2 bore. Rotary switch for engaging the automatic feed via lead and feed spindle (optionally 0.05 or 0.1mm/rev.). Tailstock: Of die-cast aluminium. Sleeve Ø 20mm, retractable up to 30mm. With millimetre scale, MK 1 bore and live centre. Support: Bed carriage made of die-cast zinc. Cross slide and top slide of steel (adjustment 60 or 45mm). Turning tool post for cutting tools size 8 x 8mm. Drive: Quiet DC special motor with 3-stage belt drive for 300 - 900 and 3,000rpm. With additional speed control (full-wave electronics) continuously adjustable to 100 - 300 or 1,000rpm, depending on belt ratio. Clockwise - anticlockwise rotation. Main switch with emergency stop function and restart protection. Lathe chuck: High quality 3-jaw chuck as per DIN 8386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing jaws from 2 - 75mm. Including lathe chuck guard with safety shutdown. Handwheels: Of aluminium, with adjustable scale ring (1 division = 0.05mm, 1 revolution = 1mm). Thread cutting device: With change gears for left-hand and righthand threads of the most important metric pitches (0.5 - 0.625 - 0.7 - 0.75 - 0.8 - 1 - 1.25 - 1.5mm). Other technical data: 220 - 240V. 50/60Hz. Size L 560, W 270, H 170mm. Weight approx. 12kg.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Grinding mop cylinder grit 120
2 x	Thicknesser DH 40
1 x	End mill for aluminium 3mm
2 x	WCMT050308
1 x	EUROline snipe nose pliers
1 x	TCMT110204
1 x	Turning inserts VCMT070204
1 x	TCMT090204
1 x	SCMT060204
2 x	Turning inserts CCMT09T304
5 x	Lathe tools 10mm pastilhados
2 x	Milling cutter set (6 - 10mm)
1 x	End mill for aluminium 4mm
3 x	Safety Insulated Pozidriv Screwdriver 14-641VDE
1 x	Insulation Resistance Tester MG125
1 x	End milling cutter kit HSS 20 pcs
1 x	Broca de alta duração de 1.4mm
1 x	broca de alta duração de 0,6mm
1 x	Tungsten carbide cutters set
4 x	Safety Insulated Phillips Screwdriver 14-631VDE
2 x	Broca de alta duração de 0.9mm
3 x	Lathe System PD 400
2 x	Broca de alta duração de 1.0mm
2 x	Broca de alta duração de 2.5mm
1 x	Broca de alta duração de 0.7mm
2 x	Broca de alta duração de 2.3mm
1 x	Ceramic-tipped tweezers and ESD 5-096
3 x	broca de alta duração de 0,2mm
1 x	Round nose pliers 165mm
1 x	SmartProg2
1 x	6-piece set of ESD/EGB tweezers
3 x	Broca de alta duração de 0.3mm
2 x	Broca de alta duração de 2.1mm
1 x	Ceramic-tipped tweezers and ESD 5-095
3 x	Broca de alta duração de 0.5mm
1 x	Broca de alta duração de 2.2mm
3 x	Telephone pliers straight 205mm
1 x	End milling cutter kit HSS 12 pcs
1 x	Broca de ponto 8.00 x 3.15
2 x	Precision lathe PD 250/E
2 x	Solid carbide saw blade
2 x	Side cutters 195mm
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
2 x	Precision magnetic gauge stand
1 x	SCMT09T304
1 x	Broca de alta duração de 2.9mm
2 x	sanding belts for BBS/s Grit 150
2 x	HSS boring tool set, 6 pieces
2 x	MICROMOT Mains Adapter NG 5/E
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
2 x	Broca de alta duração de 2.7mm
1 x	Machine Vice MS 4
1 x	Steel brushes
1 x	Tungstein carbide rasp - and cutting disc
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Tungsten Carbide Tipped (TCT)
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	magnetic base 80kg
2 x	Five piece HSS chisel set
1 x	Microfibre cloth
1 x	Gear Chuck
1 x	Super-fine sanding discs grain 000
2 x	Lambswool polishing disc
2 x	sandpaper for PS 13 Grit 400
2 x	Precision caliper 500mm
2 x	Corundum grinding disc for LWS
2 x	Polishing felt, medium hard
2 x	Conjunto de três brocas de ponto
2 x	Broca de alta duração de 1.1mm
1 x	Angle cutter 45 °
1 x	Replacement cutting wire for the THERMOCUT 12/E
1 x	Combi cutter 6.5/2.5mm
1 x	Slot cutter 3.2mm
1 x	Sanding pads for OZI 220/E grit 240
1 x	Three piece thread cutting set
1 x	Four Jaw Chuck
1 x	OPTI BF20 VARIO
1 x	Flat nose pliers 165mm
1 x	sandpaper for PS 13 Grot 180
1 x	Precision steel vice PM 40
1 x	Diamond blade
1 x	Cotton polishers
1 x	Diamond Grinding Bits 5mm
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Fibre-Cut Discs
1 x	Cotton polishers
1 x	Cross-recess Screwdrivers Pozidriv 2
1 x	MICROFLAME burner MFB/E
2 x	Pensander PS 13
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Edge cutter with pin 6.4mm
2 x	Tungsten carbide cutter 2.0mm
1 x	Bandsaw blade of bimetal for MBS 240/E
3 x	Table Sawr TKS 315 E
1 x	Universal and oil siphoning pump AP 12
1 x	HSS immersion saw blades for OZI
1 x	Flap Wheels
1 x	High quality corundum grinding bits
1 x	sclcr2525M12
1 x	Belt sander BBS/S
1 x	Independent four jaw chuck for the DB 250
1 x	ESD Tweezers 5-193
1 x	HSS cutting blade for OZI
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Steady rest for D250X550
1 x	Bench drill machine TBM 220
2 x	Diamond Cutting Discs
2 x	Chuck for TBM 220
1 x	MICROMOT extension cord. 300cm.
1 x	Jig saw blades made of HSS
1 x	Super-fine sanding discs grain 400
1 x	Boring Bar for DCMT 10mm
1 x	MICROMOT tool holder
1 x	Diamond-coated cutting disc for MIC
1 x	Glass fibre contact cleaner brush
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Angle polisher WP/E
1 x	Diamond blade for MBS 240/E
1 x	Screwdriver bit set. 49-piece.
1 x	Tungsten tipped saw blade
1 x	TORX-screwdrivers T10
1 x	MICRO Miller MF 70
1 x	MICRO Miller FF 500
1 x	Long neck angle grinder LHW
1 x	Screwdriver 5.5
1 x	Tungsten carbide cutter 3.0mm
1 x	Micro Compound Table KT 70
1 x	Wire strippers 160mm
1 x	Felt polishers
1 x	HSS drill bits 1.0mm
1 x	MICROFLAM gas soldering set MGS
1 x	Grinding and Polishing Machine SP/E
1 x	Boring Bar for CCMT 8mm
1 x	sanding belts for BBS/s Grit 80
2 x	ESD-handling set
1 x	EUROline mini side cutter
2 x	6-piece screwdriver and cross-recess set
1 x	Collet chuck ER32 for D250X550
1 x	Snipe nose pliers 45º EUROline-Conductive
2 x	DEGRESER 200ml
1 x	Telephone pliers stright 205mm
1 x	Wire strippers 165mm
2 x	Wrench Keys 1.3
1 x	CD-CLEANER 200ml
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	centrically clamping 125mm
1 x	Cutter head for copy and surface milling MT3
1 x	DIL40/QFP64-3 ZIF NEC-1
1 x	TUNER 200ml
1 x	Flat nose pliers 185mm
1 x	Side cutters 170mm
1 x	Face clamping disc for D250X550
1 x	Socket Wrenches 3.5
1 x	Mini side cutters EUROline-Conductive
1 x	EUROline round nose pliers
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Cutting tool 10 mm
1 x	3-jaw chuck centrically clamping 125mm
1 x	Safety insulated screwdrivers 14-606 VDE
2 x	Mini side cutters EUROline-Conductive
1 x	Precision quick-action drill chuck 0-13mm B16
1 x	Socket Wrenches 1.5
1 x	Cross-recess Screwdrivers 1
1 x	Telephone pliers stright 165mm
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Super safety and specialty bit set, 75-piece
1 x	CM2 - B16 - M10
1 x	lathe tools 10mm
1 x	Diamond Cutting Discs
1 x	DIL16W/SOIC16 ZIF 300mil
1 x	DIL48/QFP100 ZIF PLD-2
1 x	Combination pliers 205mm
1 x	PVC-insulated tweezers 5-107-6
1 x	Screwdriver 2.5
1 x	Earth wire
1 x	Titan Tweezers 5-037
1 x	ESD Tweezers For The SMD-Technique - 6 Piece Set
1 x	Cross-recess Screwdrivers 0
1 x	Screwdriver 3.0
1 x	PLCC Puller
1 x	Diamond Cutting Discs
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	Cross-recess Screwdrivers 1
1 x	Wrench Keys 2.0
1 x	6-piece screwdriver and cross-recess set
1 x	Side cutters 180mm
1 x	Corundum fan sander for LWS
1 x	Screwdriver 3.0
1 x	Broca de alta duração de 2.4mm
1 x	Ceramic tweezers 5-081
1 x	Flexible silicon discs
1 x	Titan Tweezers 5-036
1 x	Earth wire with dummy Schunko-plug
1 x	6-piece screwdriver and cross-recess set ESD
1 x	Fibre-Cut Discs
1 x	Combination pliers 210mm
1 x	Telephon pliers straight 200mm
1 x	Wire strippers 160mm
1 x	Cutting tool 16 mm
1 x	Diamond-coated cutting and roughing disc
1 x	Wrench Keys 2.5
1 x	Crocodile clip
1 x	Screwdriver 2.5
1 x	Floor cover ESD
1 x	ESD-handling ser 9-361
1 x	Round nose pliers 160mm
1 x	Tweezer teflon-coated 5-107-9
1 x	DIL40/MQFP52 ZIF ADuC812
1 x	Broca de alta duração de 2.6mm
1 x	lathe tools 8mm
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Backing disc for LWS
1 x	Blade holders for DS 460
1 x	Screwdriver 1.8
1 x	Surface planer AH 80
1 x	Screwdriver 1.5
1 x	Screwdriver 0.8
1 x	Screwdriver 2.5
1 x	Precision caliper square
1 x	Cross-recess Screwdrivers 0
1 x	Compact workshop vacuum cleaner CW-matic
1 x	6-piece wrench key set ESD
1 x	DCGT 070202F-AL
1 x	Screwdriver 2.0
1 x	Bottom PSOP44 NOR-3
1 x	6-piece screwdriver set ESD
1 x	Wood Lathe DB900
1 x	Set of special steel cutters
1 x	Hot wire cutter THERMOCUT 230/E
1 x	Glass fibre contact cleaner brush
1 x	Engraving tool GG
1 x	Blade for Wood and Plastics
1 x	Top PSOP44 ZIF 600mil

€24,227.53