Torno mecânico PD400, Oficina-digital.com

€1,799.00 + IVA

Torno mecânico PD400
[24400]

Torno mecânico PD400

Lathe System PD 400

Lathe PD 400 is unequalled in its class. Don't waste your time if you are trying to find similar value for money.

Ideal for straight and cross cuts, taper turning, internal and external thread cutting slotting etc. Useable on materials such as steel, non-ferrous metals (aluminum, brass etc.). Negligible variances even under heavy loads.
Ground and hardened beds of ribbed construction for highest precision and stability. The wide range of accessories complements the lathe's functions. The bed is equipped with a milled surface for securing mill/drill PF 400.

  1. Supplied with change gears for thread cutting in 19 steps (0,2 - 3,0 mm). Clearly positioned and easy to change.
  2. Main switch with emergency stop function and restart protection.
  3. Quality, precision 3 jaw chuck with 100 mm capacity.
  4. Powerful capacitor motor with 550 W output.
  5. Quick-change tool post with 2 holders (fitted with adjustable height and stop).
  6. Includes MT2 rotating centre in tailstock.
  7. Easy to use hand wheel of aluminum with adjustable scale of steel. 1 division = 0.05 mm.
  8. Fully enclosed leadscrew with Acme thread (12 x 1.5).
  9. Cross-braced cast iron bed with wide, ground ways.
  10. Handwheel for quick support change.
  11. Switch for clockwise, off and counter-clockwise rotation.
  12. Selector for auto feed.
     

Technical Data:
Centre distance 400 mm, centre height 85 mm. The swing over the top slide is 116 mm (!). Solid, ribbed bed is made of quality cast iron with ground and hardened ways. Oversized spindle with 2 adjustable taper bearings, MT 3 taper and 20.5 mm bore. Run-out, without chuck, 5/1,000 mm.

The precision 3 jaw chuck has a capacity of up to 100 mm. Six spindle speeds are provided via belt drive: Level 1: 80 / 330 / 1,400 rpm; Level 2: 160 / 660 / 2,800 rpm. Powerful, quiet capacitor motor with 550 W output. All adjusting wheels fitted with scales that may be zeroed. 1 division = 0.05 mm. The auto feed has speed of 0.07 or 0.14 mm/rev.

An integrated gearbox with change gears provides 19 pitches: 0.2 - 0.25 - 0.3 - 0.35 - 0.4 - 0.45 - 0.5 - 0.6 - 0.7 - 0.75 - 0.8 - 0.9 - 1.0 - 1.25 - 1.50 - 1.75 - 2.0 - 2.5 - 3.0 mm. Imperial threads of 10 - 48 TPI are also possible. A rotating centre MK 2 and 10 mm MT 2 gear chuck are included. Cross slide travel 85 mm and topslide 55 mm. Swivels through 45° for taper turning. Toolstock with MT 2 (short), spindle travel 40 mm and Ø 24 mm. Supplied with scale. Approx. size 900 x 400 x 300 mm. Weight approx. 45 kg. For cutters of 10 x 10 mm.

Including individual quick-change holders.
 

Comentários
Marcas
Informações
3 x MICRO Miller FF 230
2 x OPTI BF16 Vario
1 x Bucha 4 grampos centrica 100mm
3 x MICRO Miller FF 500
1 x Bucha 4 grampos independentes 100mm
1 x Bucha 4 grampos centrica 125mm
1 x Comparador
1 x Bucha 3 grampos 80mm
2 x Alicate cravar 8P/8C
1 x Broca de alta duração de 2.8mm
1 x Jogo de ferros HM 10mm
1 x Alicate cravar terminais
2 x Descarnador RG58/59/62
1 x Bucha de aperto rápido 0-8mm B16
1 x Pastilha CCGT060202-AK
1 x Jogo de ferros 8 mm
1 x Bucha 4 grampos independentes 125mm
1 x Cone morse CM2 - B16
1 x Fresa de facejar MT3
1 x Bucha de aperto rápido 0-16mm B16
1 x OPTI BF20 VARIO
1 x Cone morse CM2 - B16 - M10
1 x Jogo de ferros HM de 8mm
1 x Conjunto de fresas em Tungsténio
1 x Broca de alta duração de 1.5mm
1 x Broca de ponto 5.00 x 2.00
2 x Serra circular de bancada FET
1 x Broca de alta duração de 1.0mm
1 x Cortador de fio térmico THERMOCUT 230/E
1 x Escovas em aço Inox tipo disco
1 x Broca de alta duração de 2.5mm
2 x Plaina de bancada AH 80
1 x Broca de ponto 8.00 x 3.15
2 x MICROMOT 230/E (NOVO)
1 x Conjunto de 5 ferros de corte para metal
2 x Micro serra de disco MIC
1 x Broca de alta duração de 2.1mm
1 x broca de alta duração de 0,2mm
2 x Torno mecânico PD400
1 x Cortador de fio térmico THERMOCUT 12/E
1 x Lixadeira de disco TG 125/E
1 x Torno MS4 para coluna
1 x Ferro de soldar a Gás MGS
1 x Escovas em latão tipo pincel
1 x Broca de ponto 3.15 x 1.00
1 x Lixadeira de cinta BS/E
1 x Pistola de cola termofusivel HKP 220
1 x Escovas em aço tipo disco
1 x Mini berbequim angular LWB 220/E
1 x Serra vertical de bancada DSH com 2 velocidades
1 x MICROFLAM maçarico MFB/E
1 x Mini Drill de precisão FBS 240/E
1 x Goiva eléctrica MSG
1 x Suporte universal UHZ
1 x Conjunto de 5 ferros de corte rectificados em HSS Cobalto, 10x10
1 x Escovas em aço tipo pincel
1 x Broca de alta duração de 0.9mm
1 x Broca de alta duração de 0.7mm
1 x Cortador fio térmico THERMOCUT 650
1 x Mini Drill MICROMOT 50/EF
2 x Mini Drill MICROMOT 50/E
1 x Polidora Angular WP/E
1 x Broca de alta duração de 1.3mm
1 x Serra circular de bancada KS 230
1 x Mill/Drill System BFW 40/E
1 x Lixadeira delta OZI/E
1 x Broca de alta duração de 2.4mm
1 x Mini Drill MICROMOT 50
1 x Conjunto de três brocas de ponto
1 x Chave Pozidriv Isolada 14-644VDE
1 x Fresa de ensamblar 6.4mm
2 x Polidora de Bancada PM 100
1 x Mini berbequim de precisão FBS 12/EF - 12V
1 x Escovas em aço Inox tipo pincel
1 x Caneta Lixadeira PS 13
1 x Serra de Fita MBS 240/E
1 x Broca de alta duração de 0.5mm
1 x MICRO Miller MF 70
1 x Torno Primus 75
1 x Broca de alta duração de 0.4mm
1 x Conjunto de 3 ferros para roscas métricas, rectificados em HSS C
€21,742.24
Pesquisa Rápida
 
Utilize palavras chave para pesquisar Artigos.
Pesquisa Avançada
Formas de pagamento
Informação de Marca
PROXXON
Página PROXXON
Outros Artigos
Idiomas
Portugues English
Partilhar Artigo
Partilhar no Facebook