Top » Catalog » Micromot tools » All others » 27490

€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	magnifier 3.25 x Ø 45mm with additional lens
1 x	MICROFLAM gas soldering set MGS
1 x	Universal holder UHZ
1 x	Felt polishers
1 x	Cotton polishers
1 x	Belt sander BBS/S
1 x	MICROMOT 50
1 x	High quality corundum grinding bits
2 x	Precision steel vice PM 40
2 x	Bench drill press TBH
1 x	Machine Vice MS 4
1 x	Disc Sander TG 250/E
1 x	Jig saw STS 12/E
1 x	MICROMOT Mains Adapter NG 2/S
1 x	Sanding Drums
3 x	HSS boring tool set, 6 pieces
1 x	HSS drill bits 1.2mm
1 x	Multipurpose Vices Primus 75
1 x	Flexishaft MICROMOT 110/P
1 x	Cylinder sander WAS/E
1 x	Belt sander BS/E
1 x	Sanding Drums
2 x	High quality corundum grinding bits
1 x	Chuck for TBM 220
2 x	Treated muslin polishing wheel, stiff (100 x 15mm)
2 x	10-piece wood router cutter set
2 x	Three piece thread cutting set
1 x	Sanding pads for OZI 220/E grit 240
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Step clamps made of steel
1 x	Screwdriver bit set. 49-piece.
1 x	14-piece parallel supports set
2 x	Precision Vice FMZ
1 x	HSS drill bits 1.0mm
2 x	Precision lathe PD 250/E
1 x	MICRO Miller MF 70
1 x	Independent four jaw chuck for the DB 250
1 x	Diamond Twist Drills
1 x	Tungsten carbide cutter 3.0mm
1 x	Table Saw FET
2 x	High quality corundum grinding bits
1 x	Band knife of hardened spring band steel (without teeth)
2 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Thicknesser DH 40
1 x	Super safety and specialty bit set, 75-piece
1 x	MICRO-screwdrivers
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	Replacement glue sticks for HKP 220
1 x
1 x	HSS drill bits 0.5mm
1 x	Corundum grinding disc for LWS
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Grinding mop cylinder grit 240
2 x	Angle polisher WP/E
1 x	Hot wire cutter THERMOCUT 12/E
1 x	Nylon Fleece Brushes
1 x	Motor-driven carving device MSG
1 x	Flame shaped milling cutters
2 x	Surface planer AH 80
1 x	High quality corundum grinding bits
1 x	Flexishaft MICROMOT 110/BF
1 x	Blade guides separately
1 x	Flexible polishing pad set
1 x	Cutting tools of high quality cobalt HSS steel, ground
2 x	Fibre-Cut Discs
1 x	Pensander PS 13
1 x	Router base OFV
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Flexible silicon discs
1 x	Ball shaped milling cutters
1 x	Stainless steel wheels
1 x	Super jig saw STS/E
1 x	Felt polishers
1 x	High quality corundum grinding bits
1 x	Edge cutter with pin 6.4mm
1 x	Dividing attachment TA 230 for PF 250
1 x	Cone shaped milling cutter
1 x	Long neck angle grinder LHW
1 x	Polishing paste
1 x	High quality corundum grinding bits
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Precision Vice FMS 75
1 x	Diamond-coated cutting and roughing disc
1 x	Half round cutter 13mm
1 x	Footswitch FS
1 x	Diamond Cutting Discs
1 x	Flexible silicon discs
1 x	Grinding and Polishing Machine SP/E
1 x	Milling cutter set (6 - 10mm)
1 x	Cups brushes
1 x	High quality corundum grinding bits
1 x	Cut off/mitre saw KGS 80
1 x	Grinding mop cylinder grit 120
1 x	Gear Chuck
1 x	Scroll saw DS 230/E
1 x	Tungsten carbide cutters set
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Hot wire cutter THERMOCUT 650
1 x	Fibre-Cut Discs
1 x	Milling cutter set (2 - 5mm)
1 x	Brass brushes

€8,242.29