Top » Catalog » Micromot tools » All others » 27490

€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	sandpaper for PS 13 Grot 180
1 x	MICROMOT Mains Adapter NG 5/E
1 x	Slot cutter 6.5mm
2 x	Replacement glue sticks for HKP 220
1 x	Edge cutter with pin 6.4mm
1 x	Diamond-coated cutting disc for MIC
1 x	Rounding over cutter 6.4mm
1 x	Slot cutter 3.2mm
1 x	sandpaper for PS 13 Grit 240
1 x	MICROMOT Mains Adapter NG 2/S
1 x	MICROMOT steel collet set
1 x	MICROMOT extension cord. 300cm.
1 x	Footswitch FS
1 x	Angle cutter 45 °
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	Aluminium Die-Cast
1 x	10-piece wood router cutter set
1 x	Fluted filter for CW-matic
1 x	Slot cutter 5.0mm
2 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Self-adhesive silicone carbide sanding discs for TSG 250/E
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	MICROMOT tool holder
1 x	Micro Compound Table KT 70
1 x	Self-adhesive white corundum sanding discs for TG 250/E
1 x	V-slot cutter 6.5mm
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	Self-adhesive silicone film for easy sanding disc replacement
1 x	Flexishaft MICROMOT 110/P
1 x	Three-jaw steel drill chuck
1 x	Mill/Drill Unit BFB 2000.
1 x	Grinding mop cylinder grit 120
2 x	Fine dust paper filter for CW-matic
1 x	Flexishaft MICROMOT 110/BF
1 x	Half round cutter 13mm
1 x	sandpaper for PS 13 Grit 400
1 x	Sanding fleece for LWS
1 x	Jig saw STS 12/E
1 x	Corundum fan sander for LWS
1 x	Corundum fan sander for LWS
1 x	HSS cutting blade for OZI
1 x	Step clamps made of steel
1 x	ROTARY COAXIAL CABLE STRIPPER 3-STEPS
1 x	HSS immersion saw blades for OZI
1 x	Corundum grinding disc for LWS
1 x	Grinding and Polishing Machine SP/E
1 x	Drill chuck with sliding sleeve for the tailstock
1 x	Super-fine sanding discs grain 000
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Router base OFV
1 x	Precision caliper 500mm
1 x	PLCC Extractor
1 x	Super-fine sanding discs grain 400
1 x	Cylinder sander WAS/E
1 x	Digital caliper gauge 300 mm
1 x	Super safety and specialty bit set, 75-piece
2 x	Backing disc for LWS
1 x	Silicon-Carbide.
1 x	Bench drill press TBH
1 x	Long neck angle grinder LHW
1 x	Bench drill machine TBM 220
1 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
1 x	Dividing attachment TA 230 for PF 250
1 x	Insulation Resistance Tester MG500
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x
1 x	Belt sander BS/E
1 x	Dial gauge
1 x	Universal and oil siphoning pump AP 12
2 x	Engraving tool GG
1 x	Steel tape measure
1 x	Independent four jaw chuck for the DB 250
1 x	Belt sander BBS/S
1 x	CRIMPING PLIERS/WIRE STRIPPER
1 x	MICROMOT 50/EF
1 x	Magnetic base
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	CRIMPING PLIERS FOR CONNECTOR TYPES HT-210C
1 x	Disc Sander TG 250/E
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Tungstein carbide rasp - and cutting disc
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	sanding belts for BBS/s Grit 80
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Sanding pads for OZI 220/E grit 240
1 x	MICRO Miller FF 230
1 x	Microfibre polishing wheel, 15-ply (100mm)
1 x	Band knife of hardened spring band steel (without teeth)
1 x	sanding belts for BBS/s Grit 150
1 x	Professional polishing sponge
1 x	Precision magnetic gauge stand
1 x	Replacement belts for BSL 220/E
1 x	MICRO Miller FF 500
1 x	Three jaw chuck for the lathe DB 250
1 x	Diamond cutting blade for OZI
1 x	Super jig saw STS/E
1 x	Inpection mirror 1-978
1 x	Diamond blade for MBS 240/E
1 x	Sanding fleece for LWS

€6,814.06