Top » Catalog » Micromot tools » All others » 27490

€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service case
Service Case->
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	surface planing and thicknessing ADH 200
1 x	Corundum fan sander for LWS
1 x	Safety Insulated Phillips Screwdriver 14-631VDE
2 x	Super-fine sanding discs grain 000
1 x	Cylinder sander WAS/E
1 x	Crimping plier for BNC
1 x	Safety Insulated Phillips Screwdriver 14-633VDE
2 x	Grinding mop cylinder grit 80
1 x	surface planing and thicknessing ADH 250
1 x	Replacement cutting disc for MICRO cutter MIC
1 x	Professional set for finish grinding and polishing
1 x	Safety Insulated Pozidriv Screwdriver 14-642VDE
1 x	Safety Insulated Phillips Screwdriver 14-634VDE
1 x	Grinding mop cylinder grit 120
2 x	Tungstein carbide rasp - and cutting disc
1 x	Grinding mop cylinder grit 240
1 x	Felt cloth polishing disc (100 x 15mm)
1 x	SmartProg2
1 x	Mill/Drill System BFW 40/E
1 x	MICROMOT 50/E
1 x	Bench drill press TBH
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Broca de ponto 5.00 x 2.00
1 x	Micro Compound Table KT 70
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Extra narrow bandsaw blade (3.5mm) for tight radii
1 x	MICROMOT tool holder
1 x	Replacement belts for BSL 220/E
1 x	MICROMOT drill stand MB 200
1 x	BIT-SET
1 x	Disc Sander TG 125/E
1 x	Spiral blade. 125mm long with plain ends (without pins).
1 x	Diamond-coated cutting and roughing disc
1 x	Super-fine sanding discs grain 2000
1 x	Corundum grinding disc for LWS
1 x	Corundum bound cutting disc for LWS
1 x	Hot wire cutter THERMOCUT 650
1 x	MICROMOT extension cord. 300cm.
1 x	Inpection mirror 1-978
1 x	Grinding and Polishing Machine SP/E
1 x	Blade for Steel and brass
1 x	MICRO Miller FF 230
1 x	Machine Vice MS 4
1 x	Fine dust paper filter for CW-matic
1 x	Three piece thread cutting set
1 x	Dial gauge
1 x	Precision caliper square
1 x	Coarse-toothed blades (No. 9: 14 teeth per 25mm)
1 x	Mill/Drill Unit BFB 2000.
1 x	Broca de ponto 6.30 x 2.50
1 x	Bench drill machine TBM 220
1 x	HSS boring tool set, 6 pieces
1 x	Router base OFV
1 x	Polishing machine PM 100
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Professional Drill/Grinder IBS/E
1 x	Coarse-toothed blades (No. 3: 41 teeth per 25mm)
1 x	Conjunto de três brocas de ponto
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Pensander PS 13
1 x	Treated muslin polishing wheel, stiff (100 x 15mm)
1 x	Dividing attachment TA 230 for PF 250
1 x	Band knife of hardened spring band steel (without teeth)
1 x	Flexishaft MICROMOT 110/P
1 x	MICROMOT 230/E
1 x	Coarse-toothed (18 TPI per 25mm)
1 x	Lathe System PD 400
1 x	Belt sander BS/E
1 x	Replacement belts for BSL 220/E
1 x	Replacement glue sticks for HKP 220
1 x
1 x	HSS 1,065 x 6 x 0.6mm Dentado variável 10-14 TPI
1 x	Replacement belts for BSL 220/E
1 x	MICRO-screwdrivers

€7,080.66