Top » Catalog » Micromot tools » All others » 27490

€172.75 + VAT

Compact workshop vacuum cleaner CW-matic
[27490]

Compact workshop vacuum cleaner
CW-matic

The vacuum cleaner runs as long as the machine runs. There is a follow-up time of 5 seconds after switching off the power tool.

Smooth operation with high suction capacity. With large fluted filter made of POLYPROPYLENE to be cleaned and washed manually. Additional fine dust paper filter (not essential for this function). Container is easily emptied by removing the appliance lid with the motor unit. Blowing function available by refitting the vacuum hose. Also suitable for vacuuming liquids. Complete with 3.5m vacuum hose, 2-part aluminium vacuum pipe (98cm), floor nozzle, brush nozzle, crevice nozzle and adapter for connection to standard adapter of all such equipped PROXXON machines. Practical holder for the suction connection included (description on the left). Supplied with 6 fine dust paper filters.

Technical data:
220 - 240V. 1,100W. Connection for electric tools from 25 to 2,000W.
Container 18l. With 5m connection cable.

Reviews

Categories

Band Saw Blades
Butane soldering iron->
carpentry tools->
Chips Extractor
Componentes de elétronica->
Contact cleaner brush
Crimping Tools
Drilling-milling machine->
Drills->
Elecronic pliers->
Electronic Screwdrivers->
ESD Tools->
Inspection mirror
Insulation Resistance Tester
Lathes->
Magnifying->
Mesure tools
Micromot tools->
  ACCESSORIES->
  All others
  cut styrofoam
  Cutting machine
  Grinding and Polishing Machine
  Milling/Drilling Machines
  Precision Lathe
  Proxxon INDUSTRIAL
  Tool sets->
  Vices
Programmers and acessories->
Safety insulated screwdrivers->
Safety Isulated Pliers->
Service Case->
Service case
Solder and Flux->
Soldering Iron and station
Sprays->
Torque Screwdriver
Tweezers->
Warding files

Manufacturers

Information

Shipping & Returns
Privacy Notice
Conditions of Use

Shopping Cart

1 x	Crosscut 'Super-Cut' blade
1 x	Delta sander OZI/E
1 x	Precision steel vice PM 40
1 x	Side cutters 195mm
2 x
1 x	Super safety and specialty bit set, 75-piece
1 x	Microfibre cloth
2 x	Edge cutter with pin 6.4mm
1 x	Polishing Set
2 x	Brass contact cleaner brush
2 x	Bench drill press TBH
1 x	Tungsten tipped saw blade
1 x	Diamond-coated cutting and roughing disc
2 x	Diamond-coated cutting disc for MIC
1 x	surface planing and thicknessing ADH 200
1 x	Belt sander BBS/S
1 x	sandpaper for PS 13 Grit 400
2 x	Independent four jaw chuck for the DB 250
1 x	Band knife of hardened spring band steel (without teeth)
2 x	Slot cutter 3.2mm
1 x	Precision caliper 500mm
1 x	Grinding mop cylinder grit 80
2 x	Core box bit 3.2mm
4 x	HSS boring tool set, 6 pieces
1 x	PLCC Puller
3 x	Three piece thread cutting set
1 x	Milling cutter set (6 - 10mm)
2 x	TORQUE-SCREWDRIVER 1.5 - 4.0 Nm
2 x	TORQUE-SCREWDRIVER 0.5 - 1.5 Nm
1 x	replacement glass fibre for 2-166 Ø 4mm (PU 10)
1 x	Glass fibre contact cleaner brush
1 x	Glass fibre contact cleaner brush
1 x	Milling cutter set (2 - 5mm)
1 x	Half round cutter 13mm
1 x	Coarse-toothed (10 TPI per 25mm)
1 x	Rasp plate with metal burrs made from wolfram carbide for LWS
3 x	Lathe System PD 400
1 x	Compact workshop vacuum cleaner CW-matic
1 x	Round nose pliers 45º EUROline-Conductive
1 x	14-piece parallel supports set
1 x	TU 2404
1 x	Fluted filter for CW-matic
1 x	Cone shaped milling cutter
1 x	MICROFLAM gas soldering set MGS
1 x	Telephone pliers straight 205mm
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Gear Chuck
1 x	Snipe nose pliers 45º EUROline-Conductive
1 x	Flap Wheels
1 x	MICRO-screwdrivers
1 x	Flexishaft MICROMOT 110/P
1 x	Solid carbide stylus for engraving
1 x	Grinding mop cylinder grit 120
1 x	Tungsten carbide cutter 3.0mm
3 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Side cutters 160mm
1 x	Mini side cutters EUROline-Conductive
1 x	Diamond Grinding Bits 1,8mm
1 x	Coarse-toothed (25 TPI per 25mm)
2 x	Ball-shaped diamond coated 2.2mm
1 x	Cutting tools of high quality cobalt HSS steel, ground
1 x	Belt sander BS/E
1 x	MICRO Screwdriver MIS 1. Complete with 16 inserts.
1 x	Ball-shaped diamond coated 3.2mm
1 x	Coarse-toothed blades (No. 5: 17 teeth per 25mm)
1 x	Round nose pliers 165mm
1 x	Universal holder UHZ
1 x	Cylinder shaped milling cutters
1 x	Bench drill machine TBM 220
1 x	High quality corundum grinding bits
1 x	Flat nose pliers 165mm
1 x	Backing disc for LWS
1 x	Diamond Cutting Discs
1 x	Blade holders for DS 460
1 x	Angle cutter 45 °
1 x	Angle polisher WP/E
1 x	End side cutters EUROline-Conductive
1 x	Corundum bound cutting disc for LWS
2 x	EUROline-Conductive set of pliers
1 x	Five piece HSS chisel set
1 x	Combi cutter 6.5/2.5mm
1 x	Set of special steel cutters
1 x	Flexible silicon discs
1 x	Polishing felt, medium hard
1 x	Coarse-toothed blades (No. 5: 36 teeth per 25mm)
1 x	Corundum grinding disc for LWS
1 x	Tungsten carbide cutters set
1 x	Coarse-toothed blades (No. 3: 34 teeth per 25mm)
1 x	Coarse-toothed blades (No. 1: 50 teeth per 25mm)
1 x	End side cutters 45º EUROline-Conductive
1 x	Tungstein carbide rasp - and cutting disc
1 x	Aluminium Die-Cast
1 x	Four Jaw Chuck
1 x	Corundum sanding discs for LWS
1 x	2-speed scroll saw DSH
1 x	Super-fine sanding discs grain 400
1 x	Sanding fleece for LWS

€13,045.05